HIMMELSÖ Gazebo Assembly Instructions
Important Notes
As floor materials vary, screws for fixing the gazebo to the ground are not included. For recommendations on suitable screw systems, please contact your local specialised retailer.
Tools Required: A ladder ? and a hammer ?.
Warning: Ensure correct assembly and avoid using excessive force or incorrect tools. ⚠️
If you are unsure about any parts or steps, please contact IKEA for assistance. ❓
Parts List
- 8x Bolt (Part #10068736)
- 32x Bolt (Part #10092978)
- 1x Nut (Part #10060754)
- 28x Washer (Part #10060581)
- 1x Hook Bolt (Part #10067553)
- 1x Wrench (Part #124441)
- 2x Allen Key (L-shaped) (Part #130445)
- 8x Ground Stake (Part #10061993)
Assembly Steps
Step 1: Prepare Base Poles
Attach the square base plates (Part #10092978, 4x) to the bottom of each vertical pole using the Allen key (Part #130445).
Step 2: Assemble Lower Frame
Connect the horizontal frame pieces together to form sections of the gazebo's base and top structure.
Step 3: Attach Vertical Poles to Frame
Connect the vertical poles to the corner sections of the frame.
Step 4: Continue Frame Assembly
Continue assembling the frame by connecting the horizontal and vertical pieces.
Step 5: Attach Corner Connectors
Attach the main corner support brackets (Part #10068736, 1x) to the frame using bolts (Part #10060581, 1x) and the Allen key (Part #130445).
Step 6: Assemble Roof Support Arms
Assemble the roof support arms. Two sets of arms are joined together.
Step 7: Connect Roof Arms to Frame
Connect the assembled roof support arms to the main frame structure.
Step 8: Secure Top of Vertical Poles
Secure the top of each vertical pole to the frame using the provided brackets and bolts (Part #10092978, 4x). Use the Allen key (Part #130445).
Step 9: Attach Central Roof Hub
Attach the hook bolt (Part #10067553, 1x) to the central roof hub. Secure it with the nut (Part #10060754, 1x) using the wrench (Part #124441). Maximum load for the hook is 5 kg (11 lbs). ⓘ
Step 10: Insert Roof Poles
Insert the roof support poles into their designated slots on the frame.
Step 11: Connect Roof Poles to Hub
Connect the inner ends of the roof support poles to the central roof hub. Ensure they click into place. ✔️
Step 12: Secure Roof Poles to Frame
Connect the outer ends of the roof support poles to the main frame. Ensure they click into place. ✔️
Step 13: Drape Canopy Fabric
With assistance, carefully drape the canopy fabric over the assembled frame. ✋✋
Step 14: Secure Gazebo to Ground
Secure the gazebo to the ground using the ground stakes (Part #10061993, 8x). Use a hammer ? to drive them firmly into the ground. Ensure the stakes are driven straight for stability. ⚠️
Step 15: Attach Canopy Edges
Attach the edges of the canopy fabric to the frame by hooking them onto the designated points. ✋
Step 16: Final Canopy Fastening
Secure the canopy further by fastening it to the frame. Listen for a "Click!" sound to confirm each attachment is secure. ✔️
Step 17: Secure Canopy Straps
Use the provided straps to further secure the canopy. Loop and fasten the straps as shown. (8x loops indicated).
Step 18: Final Check
Perform a final check of all connections and ensure the structure is stable and secure.
Optional: Side Curtains
The diagram shows side curtains can be attached. Refer to separate instructions if included.
Final Assembly
The HIMMELSÖ gazebo is now fully assembled. The diagrams show the completed structure, potentially with optional side curtains.