Xiaomi G20 Lite Cordless Vacuum Cleaner
User Manual and Guide
Safety Instructions
This product is intended for domestic use only. Read this manual carefully before use and keep it for future reference.
- This product may be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if supervised or instructed on safe use and understanding the hazards. Children should not play with the appliance. Cleaning and maintenance must not be performed by children without supervision.
- The appliance contains a battery that can only be replaced by qualified persons.
- Use the appliance only with the supplied power adapter.
- The vacuum cleaner is intended for indoor use only. Do not use or install it outdoors, or in industrial or commercial environments.
- Running over the power cord may cause danger.
- Unplug the appliance before cleaning or maintenance.
- To reduce the risk of fire, explosion, or injury, ensure the power adapter is not damaged before use. Do not use the vacuum cleaner if the power adapter is damaged.
- If the charger or battery is damaged, replace it with original parts purchased from the manufacturer or after-sales service.
- Turn off the vacuum cleaner before cleaning or replacing the brush roll.
- The electric brush head, extension tube, and vacuum cleaner conduct electricity; do not immerse them in water or other liquids. Ensure the filter, pre-filter, and final filter are completely dry after cleaning.
- To avoid personal injury, turn off the vacuum cleaner and remove the electric brush head before cleaning and maintenance. Do not use the vacuum cleaner before the electric brush head, dustbin cover, filter, pre-filter, and final filter are installed.
- Periodically check the extension tube and do not use it if damaged.
- Do not use the vacuum cleaner to collect flammable or explosive liquids, such as gasoline, or other liquids like water, or toxic liquids like bleach, ammonia, or drain cleaners.
- Do not use the vacuum cleaner to clean toner used in laser printers and copiers, as toner can cause fire or explosion.
- Do not use the vacuum cleaner to collect drywall debris, ash (e.g., fireplace ash), or smoldering or burning materials like coal, cigarette butts, or matches.
- Do not use the vacuum cleaner to collect sharp or hard objects like glass, nails, screws, or coins, as they can damage the product.
- Do not use the vacuum cleaner to clean stains of viscous oily substances, strong adhesives, or dyes like shoe polish, paint, and pigments.
- Keep hair, loose clothing, fingers, and other body parts away from the openings and moving parts of the vacuum cleaner.
- Do not point the suction inlet, extension tube, or any accessories towards eyes or ears, or put them in your mouth.
- Do not insert any objects into the vacuum cleaner openings or use the vacuum cleaner with blocked openings. Clean the vacuum cleaner of dust, lint, hair, and other items that may reduce suction power.
- Do not place the vacuum cleaner on unstable objects like chairs or tables to prevent damage or injury from falling.
- Do not charge or store the vacuum cleaner near heat sources or in humid environments, such as next to a radiator, in the kitchen, or bathroom.
- Do not expose the appliance or battery to excessive temperatures.
- Be aware of the risk posed by the terminals of a battery-powered appliance or the risk of battery short-circuiting caused by metallic objects.
- Use only replacement parts approved by Xiaomi.
- If the battery leaks, avoid contact with the fluid and take the battery to an authorized recycling facility. If fluid gets into eyes, rinse with plenty of water and seek medical advice immediately.
- Exercise extra caution when using the vacuum cleaner to clean stairs.
- Fire Hazard Warning: Do not use scented liquids for the vacuum cleaner's pre-filter and final filter. These products contain flammable chemicals that can cause the vacuum cleaner to ignite.
- Strictly follow the instructions in this manual and charge the vacuum cleaner at an ambient temperature between 0°C and 35°C. Improper charging may damage the battery.
- Strictly follow the instructions in this manual when using the vacuum cleaner. Users are responsible for any loss or damage resulting from improper use of the vacuum cleaner.
WARNING: Use only the power adapter supplied with this appliance.
WARNING: Only use the detachable power adapter supplied with the appliance to charge the battery.
Use only with power adapter BLJ15WJ270050P-V or AD-D0752700050EU01.
EU Declaration of Conformity: Beijing Shunzao Technology Co., Ltd. hereby declares that this product complies with the essential requirements and relevant provisions of Directive and European standards. The full text of the EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html
WEEE Disposal and Recycling Information: Products marked with this symbol are considered Waste Electrical and Electronic Equipment (WEEE) and should not be disposed of with other household waste. Proper disposal helps prevent potential negative impacts on human health and the environment. Contact local authorities or the supplier for more information.
Product Overview
The vacuum cleaner consists of the main unit, which includes the dustbin and filter. The main unit has a power button to turn it on/off, a mode button to switch between turbo and standard modes, a battery indicator, and a charging port.
Key Components:
- Vacuum Cleaner Body: Main unit containing the motor, dustbin, and battery.
- Dustbin: Collects dirt and debris. Features a dust release button.
- Filter: Located inside the dustbin to filter air.
- Power Button: Press to turn the vacuum on or off.
- Mode Button: Press to switch between Turbo and Standard suction modes.
- Battery Indicator: Shows the battery charge level.
- Charging Port: Connect the power adapter here for charging.
Accessories:
- Extension Tube: Connects the main unit to the brush head for extended reach.
- Electric Brush Head: For cleaning floors.
- 2-in-1 Crevice Tool: For cleaning tight spaces and surfaces.
- Wall Mount Bracket: For storing the vacuum cleaner on the wall. Includes screws and wall plugs.
- Power Adapter: For charging the vacuum cleaner.
Installation
Mounting Accessories to the Vacuum Cleaner
- Connecting the Extension Tube to the Vacuum Cleaner and Electric Brush Head: Align the extension tube with the vacuum cleaner main unit and the electric brush head, then push them together until they click into place.
- Connecting the 2-in-1 Crevice Tool to the Vacuum Cleaner: Align the crevice tool with the vacuum cleaner main unit and push until it clicks into place.
Mounting the Wall Mount Bracket
- Choose a cool, dry location near an electrical outlet. Ensure no pipes or wires are behind the wall where the bracket will be mounted.
- The bottom of the wall mount bracket should be 96.5 cm from the floor.
- Hold the bracket in position against the wall, aligning its mounting holes with the wall. Mark the hole positions.
- Drill holes approximately 40 mm deep using an 8 mm drill bit at the marked positions. Insert the provided wall plugs into the holes.
- Align the bracket's mounting holes with the wall holes, and secure the bracket using the provided screws.
Charging
Charging the Battery:
Connect the power adapter to the charging port on the vacuum cleaner. The battery indicator will show the charging status.
Battery Indicator Status:
Status | Indicator Light |
---|---|
Operating | Off (when battery is low) |
Operating | Blinking (when battery is low) |
Operating | On (when battery is half charged) |
Charging | On (when battery is nearly charged) |
Charging | On (when battery is fully charged) |
Notes:
- Fully charge the vacuum cleaner before first use. This takes approximately 5 hours.
- The vacuum cleaner cannot be used while charging.
- After full charging, the indicator will turn off after 20 seconds, and the vacuum cleaner will enter power-saving mode.
- Prolonged use at maximum suction may cause the battery to heat up, potentially increasing charging time. Allow the vacuum cleaner to cool for 30 minutes before charging if it feels warm.
How to Use
Electric Brush Head
Use for cleaning floors such as marble, wood, and short-pile carpets.
Diagram Description: An illustration shows the electric brush head being used on a floor.
2-in-1 Crevice Tool
Suitable for cleaning tight spaces like keyboards, curtains, sofas, ceilings, corners, and car interiors.
Note: To avoid potential safety hazards, do not expose the vacuum cleaner to direct sunlight or store it in high-temperature locations, such as a car interior in summer.
Diagram Description: An illustration shows the 2-in-1 crevice tool being used to clean a sofa or car seat crevice.
Care and Maintenance
Warnings:
- Always unplug the power and ensure the vacuum cleaner is turned off before maintenance.
- Always use original parts to ensure normal operation and warranty validity.
- If the filter, pre-filter, final filter, extension tube, or 2-in-1 crevice tool becomes clogged, the vacuum cleaner will stop working. Turn off and clear the blockage before reuse.
- If the brush head gets blocked, it will stop working, but the vacuum cleaner will continue to operate. Turn off and clean the brush head before reuse.
- Remove the brush head from the vacuum cleaner before cleaning to prevent accidental activation and injury.
- If the vacuum cleaner will not be used for an extended period, charge it fully, unplug it, and store it in a cool, low-humidity place away from direct sunlight.
- To prevent excessive battery discharge, charge the vacuum cleaner at least once every three months.
Cleaning the Dustbin
Unplug the power and detach the extension tube before cleaning the dustbin. The vacuum's performance decreases when the dustbin is filled to the "MAX" line. Empty the dustbin to restore performance.
- Emptying the Dustbin: Hold the dustbin over a trash can and press the dust release button to empty its contents.
Cleaning the Vacuum Cleaner
Wipe the vacuum cleaner with a clean, dry cloth.
Diagram Description: An illustration shows wiping the main body of the vacuum cleaner with a cloth.
Cleaning the Filter Assembly
- Press the dust release button to open the dustbin. Rotate the filter as shown to remove it, then detach the pre-filter.
- Rotate the final filter as shown to remove it.
- Rinse the filter, pre-filter, and final filter under running water until clean. Allow all filters to dry completely for at least 24 hours.
Diagram Description: Illustrations show removing the filter and pre-filter, then the final filter. Another illustration shows rinsing the filters under a tap and placing them to dry.
Notes:
- Never immerse the filter, pre-filter, or final filter in water.
- When cleaning the final filter, rinse it multiple times and gently tap its edge to remove dust and debris until it is clean.
- Do not clean the pre-filter and final filter with hands, brushes, or sharp objects, as they may be damaged.
- If suction power is still significantly reduced after cleaning the pre-filter and final filter, consider purchasing and replacing them with original parts.
Cleaning the Electric Brush Head
- Turn the brush head upside down and press the brush roll release button to unlock and remove the brush roll.
- Use a dry cloth or paper towel to wipe away dust and debris from the suction inlet and the transparent cover. Note: Do not clean the electric brush head with water, as it has a built-in motor.
- Reinstall the brush roll and press the lock to secure it in place.
Diagram Description: Illustrations show detaching the brush roll, cleaning the suction inlet, and reattaching the brush roll.
Troubleshooting
If the vacuum cleaner does not operate correctly, an error message may appear on the battery indicator. Refer to the table below to resolve issues.
Typical Problem | Probable Cause | Solution |
---|---|---|
Vacuum cleaner does not work. | Battery is depleted. | Charge the vacuum cleaner before use. |
Suction inlet, air duct, pre-filter, or final filter is blocked. | Check and clean immediately. | |
Filter, pre-filter, or final filter is not installed correctly. | Check and install correctly. | |
Temperature protection of the battery has been activated. | Wait for the battery temperature to return to normal, then resume operation. | |
Suction power decreases. | Dustbin is full, or pre-filter or final filter is clogged. | Check and clean immediately. |
Brush head is clogged. | Clean the brush head. | |
Battery is not fully charged. | Charge the vacuum cleaner before use. | |
Short battery life. | Dustbin is full, or pre-filter or final filter is clogged. | Check and clean immediately. |
Brush head is clogged. | Clean the brush head. | |
Foreign objects are tangled in the brush roll. | Remove any foreign objects, then resume use. | |
Brush roll does not rotate. | High-temperature protection of the brush head motor has been activated. | Wait for the brush head motor temperature to return to normal before use. |
Conductive contacts are dirty. | Wipe the contacts with a soft, dry cloth and try again. | |
Cannot charge. | The power adapter used is not original. | Use only the original power adapter to charge the vacuum cleaner. |
Temperature protection of the battery has been activated. | Wait for the battery temperature to return to normal, then resume operation. | |
Battery charges slowly. | Battery temperature protection has been activated. | Wait for the battery temperature to return to normal, then resume operation. |
LED Error Codes:
Error Code | Probable Cause | Solution |
---|---|---|
LED 1, LED 2, and LED 3 blink simultaneously three times. | Power error | Use only the original power adapter to charge the vacuum cleaner. |
Battery temperature protection activated. | Wait for the brush head motor temperature to return to normal before use. | |
Battery cell error | Contact after-sales service. | |
Temperature sensor error | Contact after-sales service. | |
LED 1 blinks ten times. | Motor error | Use only the original power adapter to charge the vacuum cleaner. |
Battery depleted | Use only the original power adapter to charge the vacuum cleaner. |
Note: If the above tips do not resolve the problem, please contact the after-sales service department.
Technical Specifications
Xiaomi G20 Lite Vacuum Cleaner
Item | Specification |
---|---|
Name | Cordless Vacuum Cleaner |
Model | C203 |
Rated Voltage | 22.2 V ⎓ |
Rated Power | 215 W |
Charging Voltage | 27.0 V ⎓ |
Net Weight | 2.4 kg |
Power Consumption (Standby Mode) | ≤ 0.5 W |
Time to Standby | < 20 min |
Electric Brush Head
Item | Specification |
---|---|
Model | C203-DS |
Rated Voltage | 22.2 V ⎓ |
Rated Power | 15 W |
Power Adapter
Adapter 1
Item | Specification |
---|---|
Manufacturer | Zhongshan Baolijin Electronic Co., Ltd. |
Model | BLJ15WJ270050P-V |
Input | 100-240 V ~ 50/60 Hz 0.5 A |
Output | 27.0 V ⎓ 0.5 A 13.5 W |
Average Efficiency During Operation | 85.9% |
Efficiency at Low Load (10%) | 73.2% |
No-load Power Consumption | 0.09 W |
Adapter 2
Item | Specification |
---|---|
Manufacturer | Shenzhen AMC Technology Co., Ltd. |
Model | AD-D0752700050EU01 |
Input | 100-240 V ~ 50/60 Hz 0.8 A |
Output | 27.0 V ⎓ 0.5 A 13.5 W |
Average Efficiency During Operation | 84.5% |
Efficiency at Low Load (10%) | 75.5% |
No-load Power Consumption | 0.09 W |
Note: Models BLJ15WJ270050P-V and AD-D0752700050EU01 can be used with the vacuum cleaner; only one is supplied with the unit.
Environmental Protection Information
The lithium-ion battery pack in this vacuum cleaner contains chemicals that can pollute the environment. Before disposing of the vacuum cleaner, remove the battery and take it to an appropriate waste processing facility.
- Remove the battery from the appliance before disposal.
- The appliance must be disconnected from the power supply when removing the battery.
- Dispose of the battery in an environmentally safe manner.
Warnings:
- Before removing the battery, ensure the vacuum cleaner is disconnected from power and the battery is completely discharged.
- Take removed batteries to a professional recycling facility for proper disposal.
- Do not leave the battery in a high-temperature environment where it could explode.
- If the battery leaks, avoid contact with the fluid. If fluid gets into eyes, rinse eyes with plenty of water and seek medical advice immediately.
Battery Removal:
- Remove the rear covers of the vacuum cleaner and handle, then remove the microswitch from the handle.
- Use a screwdriver to unscrew the screws in the vacuum cleaner, then disconnect the wires and remove the battery pack.
- Unscrew the two screws above the battery pack's circuit board.
- Remove the top and bottom covers of the circuit board and battery pack, then remove the batteries.
Warranty
This warranty grants the user specific rights, but users may also have other rights provided by the law of their country, administrative region, or state. In some countries, administrative regions, or states, consumer law may provide for a minimum warranty period. Any exclusions, limitations, or suspensions of rights granted to the user, invoked by Xiaomi, are only to the extent permitted by applicable law. To fully understand your rights, please consult the law of your country, administrative region, or state.
1. Limited Product Warranty
Xiaomi warrants that Products will be free from material and workmanship defects under normal use and in accordance with the Product's user manual during the Warranty Period. The warranty period and terms are subject to local regulations. For more information on consumer warranty benefits, visit the official Xiaomi website: https://www.mi.com/global/support/warranty.
Xiaomi warrants to the original purchaser that the Product will be free from material and manufacturing defects under normal use for the period mentioned above. Xiaomi does not guarantee that the Product's operation will be uninterrupted or error-free. Xiaomi is not responsible for damages caused by failure to comply with the Product's usage instructions.
2. Remedies
In case of a product defect and upon receiving a valid claim within the Warranty Period, Xiaomi will, at its option, (1) repair the product free of charge, (2) exchange the product, or (3) refund the purchase price of the Product, excluding any shipping costs.
3. How to Obtain Warranty Service
To obtain warranty service, you must deliver the Product in its original packaging or packaging providing an equal degree of protection to the address specified by Xiaomi. Before claiming warranty service, Xiaomi may require you to provide proof of purchase and/or to register the Product, to the extent permitted by applicable law.
4. Exclusions and Limitations
Unless Xiaomi states otherwise, this Limited Warranty applies only to the Product manufactured by or for Xiaomi and identifiable by the trademarks, trade name, or logo "Xiaomi" or "Mi". The Limited Warranty does not apply to (a) damage caused by natural causes or force majeure, such as lightning, tornado, flood, fire, earthquake, or other external causes; (b) negligence; (c) commercial use; (d) modification of any part of the Product; (e) damage resulting from use of the Product in conjunction with non-Xiaomi products; (f) damage caused by accident, misuse, or abuse; (g) damage caused by operating the Product outside the permitted or intended uses described by Xiaomi or due to incorrect voltage or power supply; (h) damage caused by any service (including upgrades and expansions) performed by anyone who is not an authorized representative of Xiaomi. It is the user's responsibility to back up any data, software, or other materials stored or preserved on the product. It is possible that the data, software, or other materials in the device will be lost or reformatted during servicing, and Xiaomi is not responsible for any such damage or loss. No Xiaomi reseller, agent, or employee is authorized to make any modification, extension, or addition to this Limited Warranty. If any term is held to be illegal or unenforceable, the legality and enforceability of the remaining terms shall not be affected. After-sales service shall be limited to the country or region of the original purchase, unless otherwise stipulated by applicable law or Xiaomi makes other commitments. Products that are not imported and/or not manufactured by Xiaomi and/or not purchased from Xiaomi or an authorized Xiaomi reseller are not covered by these warranties. In accordance with applicable law, you may benefit from warranty services provided by the non-official seller who sold you the product. Therefore, Xiaomi encourages you to contact the seller from whom you purchased the product. These warranties do not apply in Hong Kong and Taiwan.
5. Implied Warranties
Except to the extent prohibited by applicable law, all implied warranties (including warranties of merchantability and fitness for a particular purpose) are limited to the maximum duration of this limited warranty. Some jurisdictions do not allow limitations on the duration of an implied warranty, so the above limitation may not apply to you in such cases.
6. Limitation of Liability for Damages
To the extent permitted by law, Xiaomi shall not be liable for any incidental, indirect, special, or consequential damages whatsoever, including but not limited to loss of profits, revenue, or data, damages resulting from any breach of express or implied warranty or condition, or any other legal theory, even if Xiaomi has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of liability for special, indirect, or consequential damages, so the above limitation or exclusion may not apply to you.
7. Contacting Xiaomi
Customers are encouraged to visit https://www.mi.com/global/support/warranty. The after-sales service contact person may be any person in Xiaomi's authorized service network, an authorized Xiaomi distributor, or the final seller who sold the product to the user. If in doubt, please contact the appropriate person designated by Xiaomi.