Xiaomi Vacuum Cleaner G20 Lite User Manual

Safety Instructions

This product is intended for domestic use only. Read and keep this manual for future reference.

• The product can be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if supervised or instructed on safe use and understanding the hazards involved. Children should not play with the appliance. Cleaning and maintenance should not be performed by children without supervision.
• The appliance contains a battery that can only be replaced by qualified persons.
• Use the appliance only with the supplied power adapter.
• The vacuum cleaner is for indoor use only. Do not use or install it outdoors, or in industrial or commercial environments.
• The appliance may pose a hazard if it runs over the power cord.
• Unplug the appliance before cleaning or maintenance.
• To reduce the risk of fire, explosion, or injury, ensure the power adapter is not damaged before use. Do not use the vacuum cleaner if the power adapter is damaged.
• If the charger or battery is damaged, replace them with original parts purchased from the manufacturer or after-sales service.
• Turn off the vacuum cleaner before cleaning or replacing the roller brush.
• The electric brush head, extension tube, and vacuum cleaner conduct electricity, so do not immerse them in water or other liquids. After cleaning, ensure the filter, pre-filter, and post-filter are completely dry.
• To avoid personal injury, turn off the vacuum cleaner and remove the electric brush head before cleaning and maintenance. Do not use the vacuum cleaner before installing the electric brush head, dustbin cover, filter, pre-filter, and post-filter.
• Periodically check the extension tube and do not use it if it is damaged.
• Do not use the vacuum cleaner to collect flammable or explosive liquids, such as gasoline, or other liquids like water, or toxic liquids like bleach, ammonia, and drain cleaners.
• Do not use the vacuum cleaner to clean up toner used in laser printers and copiers, as toner can cause fire or explosion.
• Do not use the vacuum cleaner to collect drywall debris, ash (e.g., fireplace ash), or smoldering or burning materials such as coal, cigarette butts, or matches.
• Do not use the vacuum cleaner to collect sharp or hard objects, such as glass, nails, screws, or coins, as they may damage the product.
• Do not use the vacuum cleaner to clean up stains of thick oily substances, strong adhesives, or dyes, such as shoe polish, paints, and pigments.
• Keep hair, loose clothing, fingers, and other body parts away from the appliance's openings and moving parts.
• Do not point the suction port, extension tube, or other accessories towards eyes or ears, or put them in your mouth.
• Do not insert any objects into the vacuum cleaner's openings or use the vacuum cleaner with a blocked opening. Clear the vacuum cleaner of dust, lint, hair, and other items that may reduce suction power.
• Do not place the vacuum cleaner on unstable objects such as chairs or tables to prevent damage or personal injury from falling.
• Do not charge or store the vacuum cleaner near heat sources or in damp areas, such as next to a radiator, in the kitchen, or bathroom.
• Do not expose the appliance or battery to excessive temperature.
• Be aware of the risk posed by the terminals of a battery-powered appliance or the risk of battery short-circuiting caused by metal objects.
• Use only replacement parts approved by Xiaomi.
• If the battery leaks, avoid contact with the liquid and take the battery to an authorized recycling facility. If contact with eyes occurs, rinse with plenty of water and seek medical advice immediately.
• Exercise extra caution when using the vacuum cleaner to clean stairs.
• Fire hazard warning: Do not use fragrance liquids for the vacuum cleaner's pre-filter and post-filter. These types of products contain flammable chemicals that can cause the vacuum cleaner to ignite.
• Strictly follow the instructions in this user manual and charge the vacuum cleaner at an ambient temperature between 0°C and 35°C. Improper charging may damage the battery.
• When using the vacuum cleaner, strictly follow the instructions in this user manual. Users are responsible for any losses or damages resulting from improper use of the vacuum cleaner.

WARNING: Use only the power adapter supplied with this appliance.

WARNING: Use only the detachable power adapter supplied with the appliance to charge the battery.

• Use only with power adapter BLJ15WJ270050P-V or AD-D0752700050EU01.

Regulatory Compliance Information

EU Declaration of Conformity

CE ?

Beijing Shunzao Technology Co., Ltd. hereby declares that this product complies with the requirements of the relevant EU directives and European standards, including amendments. The full text of the EU Declaration of Conformity is available at the following website: http://www.mi.com/global/service/support/declaration.html

WEEE Disposal and Recycling Information

All products marked with this symbol are considered waste electrical and electronic equipment (WEEE according to Directive 2012/19/EU) and cannot be disposed of with other waste at the end of their service life. To protect human health and the environment, please hand over your used equipment to a designated collection point designated by government or local authorities. Proper disposal of the used product helps prevent potential negative impacts on the environment and human health. For more information, please contact your local authority or installer.

Product Overview

Vacuum Cleaner Components:

• Vacuum Cleaner Body
• Dust Removal Button
• Dustbin
• Mode Button: Press to switch between turbo and standard modes.
• Battery Level Indicator
• Charging Port
• Power Button: Press to turn on or off.

Accessories List:

• Extension Tube
• Charger
• 2-in-1 Brush Nozzle
• Electric Brush Head
• Wall Mount for Storage (includes 2 screws and 2 wall plugs)

Note: Illustrations of the product, accessories, and user interface in this user manual are for reference only. The actual product and features may differ from those shown due to product improvements.

How to Install

Mounting Accessories on the Vacuum Cleaner

• Connecting the extension tube to the vacuum cleaner and the electric brush head.
• Connecting the 2-in-1 brush nozzle to the vacuum cleaner.

Mounting the Wall Mount for Storage

1. Choose a cool, dry place near an electrical outlet. Before mounting, ensure that no pipes or wires are routed directly behind the mounting location on the wall.
2. The distance between the bottom of the wall mount for storage and the floor should be 96.5 cm.
3. Hold the wall mount for storage in the desired position and mark the holes on the wall to align with the holes on the mount.
4. Use an electric drill with an 8 mm drill bit to drill a hole approximately 40 mm deep at each marked point, then insert a wall plug into each hole.
5. Align the mounting holes on the wall mount with the holes on the wall, then use the provided screws to attach the mount to the wall.

Diagram showing wall mount installation with dimensions.

Charging

Battery Level Indicator Status:

• Off: Device is off.
• Flashing: Low battery.
• Solid On: Battery is charging or fully charged.

Charging Status:

• Flashing: Low battery.
• Solid On: Battery is half-charged.
• Flashing: Battery is almost fully charged.
• Solid On: Battery is fully charged.

Notes:

• Fully charge the vacuum cleaner before first use. This will take approximately 5 hours.
• The vacuum cleaner cannot be used while charging.
• After the vacuum cleaner is fully charged, the indicator will turn off after 20 seconds, and the vacuum cleaner will enter power-saving mode.
• Vacuuming for extended periods at the highest suction level will cause the battery to heat up, which may extend charging time. It is best to let the vacuum cleaner cool down for 30 minutes before charging.

How to Use

Electric Brush Head

For cleaning marble, wood, and short-pile carpet floors.

2-in-1 Brush Nozzle

Suitable for cleaning crevices, such as keyboards, curtains, sofas, ceilings, corners, and car interiors.

Note: To avoid potential safety hazards, do not expose the vacuum cleaner to direct sunlight or store it in high-temperature environments, such as inside a car in summer.

Diagram showing the electric brush head and 2-in-1 brush nozzle in use.

Care and Maintenance

General Precautions:

• Always unplug the power and ensure the vacuum cleaner is turned off before maintenance or care.
• Always use original parts to ensure normal operation and maintain warranty validity.
• If the filter, pre-filter, post-filter, extension tube, or 2-in-1 brush nozzle becomes clogged, the vacuum cleaner will stop working. Turn off the vacuum cleaner and clear the relevant part before use.
• If the brush head gets stuck, it will stop working, but the vacuum cleaner will continue to operate. Turn off the vacuum cleaner and clean the brush head before use.
• Before cleaning, remove the brush head from the vacuum cleaner to prevent accidental activation of the vacuum cleaner, which could cause injury.
• If the vacuum cleaner will not be used for an extended period, charge it fully, unplug it from the power supply, and store it in a cool, low-humidity place, away from direct sunlight.
• To avoid over-discharge of the battery, charge the vacuum cleaner at least once every three months.

Cleaning the Dustbin

Unplug the power and remove the extension tube before cleaning the dustbin. The vacuum cleaner's performance will decrease when the dustbin is filled to the “MAX” mark. To restore its performance, empty the dustbin.

• Emptying the Dustbin: Hold the dustbin over a trash can, then press the dust removal button to empty its contents.

Cleaning the Vacuum Cleaner

Wipe the vacuum cleaner with a clean, dry cloth.

Cleaning the Filter Assembly

1. Press the dust removal button to open the dustbin, rotate the filter as shown in the illustration to remove it, and then remove the pre-filter.
2. Rotate the post-filter as shown in the illustration to remove it.
3. Rinse the filter, pre-filter, and post-filter under running water until clean, then place all filters to dry completely for at least 24 hours.

Notes:

• Never immerse the filter, pre-filter, or post-filter.
• When cleaning the post-filter, rinse it repeatedly and tap its edge lightly to remove dust and debris until it is clean.
• Do not clean the pre-filter and post-filter with your hands, a brush, or sharp objects, as they may be damaged.
• If the suction power is still significantly reduced after cleaning the pre-filter and post-filter, you can try purchasing and replacing them with original ones.

Cleaning the Electric Brush Head

1. Turn the brush head upside down and press the roller brush release button to unlock and remove the roller brush.
2. Use a dry cloth or paper towel to wipe away dust and debris from the suction port and the transparent cover. Note: Do not clean the electric brush head with water, as it has a built-in motor.
3. Reinstall the roller brush and press the lock to secure it in place.

Troubleshooting

If the vacuum cleaner does not work properly, an error message will appear on the battery level indicator. Compare it with the following table to resolve the problem.

Note: If the above tips do not resolve the problems, please contact the after-sales service department.

Technical Specifications

Note: Models BLJ15WJ270050P-V and AD-D0752700050EU01 can be used with the vacuum cleaner, and only one of them is supplied in the package.