LOCATION
- ✔️ See the Attached Photograph or Sketch
- ✔️ Bottom of the device
- ☐ Front of the device
- ☐ Back of the device
- ☐ Back of the device under Belt Clip
- ☐ In the Battery Compartment
- ☐ Electronic labeling: In the user manual (Section: XX)
TYPE
✔️ The label is a poly carbonate film laminate and the adhesive is a 2 MIL thick 3M 467 MP Adhesive Transfer Tape.
MARKINGS (TEXT)
- ✔️ See the Attached Photograph and the actual location of the FCC/IC label on the device.
- ✔️ Label Attached Below.
- ✔️ See Attached Picture.
LABEL SPECIFICATIONS AND DIAGRAM
NOTES:
- BASE MATERIAL: 5 MIL (.005" +/- .0005") POLYCARBONATE
- ADHESIVE: 2 MIL (.002" +/- .0010") 3M 467 MP
- FINISH: VELVET MATTE
- COLOR: PANTONE BLACK C BACKGROUND WITH PANTONE COOL GRAY 6C TEXT
- 2D BARCODE COMPLIES WITH ECC-200 AND ENCODES A 4-DIGIT PREFIX FOLLOWED BY A 6-DIGIT SERIALIZATION AND SPECIFIED IN PURCHASE ORDER (REPRESENTED ON THE DRAWING AS LRBT-XXXXXX)
- LABELS TO BE WEEDED FOR EASY REMOVAL FROM LINER
- LABELS TO BE PACKAGED IN ROLL FORM IN QUANTITIES OF 1000
- ADOBE FILE WILL BE PROVIDED FOR ARTWORK. GRAPHICS ON THIS DRAWING ARE FOR REFERENCE ONLY
- LABEL SHAPE DEFINED BY DXF FILE PROVIDED WITH GLOBAL TOLERANCE OF +/-0.13MM
LABEL DIAGRAM DESCRIPTION:
A rectangular label with rounded corners (radius R1.5), measuring 37.34 units in width and 24.64 units in height. The label features:
- Top section: "MOTOROLA" logo in white text on a black background.
- Middle section: "ASSEMBLED IN USA" on the left, "WGA00751" on the right.
- Below middle: "Model: MIC-WRL-CHG-500" on the left, "LRBT: XXXXXX" on the right.
- Lower section: "FCC ID: AZ499FT6030" on the left, "IC: 109U-99FT6030" on the right.
- Bottom section: CE logo, FCC logo, a 2D barcode, and a UKCA logo.
- A note "SEE NOTE 5" points to the 2D barcode area.
LABEL LOCATION EXAMPLE
A photograph shows a device with a label indicating the location of the FCC and IC labels. A red arrow points to a label on the device, which has the handwritten number "7" on it.
*** END ***
