MOTOROLA DLR1020 RADIO PROGRAMMING INSTRUCTIONS

This document provides step-by-step instructions for programming the Motorola DLR1020 radio to ensure synchronized communication between devices.

Programming Steps

1. Turn the radio off.
2. Hold the push-to-talk (big circle button), plus button, and power button simultaneously. The radio will then enter programming mode.
3. Once in programming mode, press the four-squared menu button on the side of the radio. The radio should then say, "profile ID, to change press plus or minus".
4. Press the plus button continuously to change the first digit of the code to 4.
5. Press the four-squared menu button to move to the second digit and press the plus button continuously to change it to 6.
6. Press the four-squared menu button to move to the third digit and change it to 6 and repeat this to change the fourth digit to 3.
7. Press the four squared menu button again to lock in the code. The radio should then read "profile ID saved as 4663".
8. Once this is completed your radios should work together.

Device Description

A Motorola DLR1020 radio is shown. It is a compact, black two-way radio with a prominent, large circular push-to-talk (PTT) button on the side. Above the PTT button are smaller buttons, including a menu button and a plus button. The radio features a textured grip, a speaker grille with the 'MOTOROLA' logo, and a flexible antenna extending from the top.