EcoFlow DELTA Pro User Manual

DISCLAIMER

Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer at https://ecoflow.com/pages/terms-of-use and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and using EcoFlow products in a way that is compliant.

EcoFlow DELTA Pro (Hereinafter referred to as DELTA Pro)

1. Specifications

General Info

Output Ports

* A car charger shares power with the DC5521 output port, offering a maximum output of 126W.

Input Ports

Battery Info

Environmental Operating Temperature

* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.

Add-ons (sold separately)

2. Safety Instructions

2.1 Usage

1. Do not use the product near a heat source, such as a fire source or a heating furnace.
2. Avoid contact with liquids of any kind. Do not use in the rain or high humidity.
3. Do not use around strong static electricity or magnetic fields.
4. Do not disassemble in any way or puncture.
5. Avoid using wires or other metal objects that may result in a short circuit.
6. Do not use third-party components. Consult official EcoFlow channels if you need to replace anything.
7. It is highly recommended that third-party accessories are purchased from reliable distributors and that they match your product's specifications. EcoFlow is not liable for abnormality, inconvenience, losses or expenses resulting from defective third-party accessories.
8. When using the product, please strictly follow the operating environment temperature specified in this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work.
9. Do not stack any heavy objects on the product.
10. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
11. Ensure the product is not hit, dropped, or heavily vibrated. Securely fasten the product when transporting to avoid damage. If severely damaged, turn off the power source immediately and discontinue using the product.
12. If you accidentally drop the product into water during use, please place it in a safe open area, and stay away from it until it is completely dry. The dried product should not be used again, and should be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher.
13. Only clean the ports with a dry cloth.
14. Place on a flat surface to keep the product from falling over. If the product is overturned and severely damaged, turn it off immediately, place the battery in an open area, keep it away from people and combustibles, and dispose of it in accordance with local laws and regulations
15. Keep out of reach of children and pets.

2.2 Disposal Guide

1. When possible, fully discharge the battery before disposing it. Because it contains hazardous chemicals, only dispose of the battery in designated recycling channels and never with ordinary trash. Consult your local laws on battery recycling and disposal.
2. If the battery cannot be fully discharged due to product failure, contact a professional battery recycling company for further processing.
3. Please dispose of batteries that no longer recharge.

3. Getting Started

3.1 Product Details

Diagram Description: The diagram shows the front, top, and side views of the EcoFlow DELTA Pro. Key components are labeled, including USB-A output ports, USB-C output ports, AC output sockets, AC charge speed switch, solar/car charging input port, Anderson port, 12V DC power button, IOT button, pairing button, Infinity port, pairing status indicator, main power button, AC power button, X-Stream AC charging input port, overload protection switch, and extra battery port.

3.2 LCD Screen

Diagram Description: The diagram illustrates the DELTA Pro's LCD screen with various indicators. These include EV X-Stream Charging Indicator, Remaining Battery Percentage, Remaining Charge/Discharge Time, Low Temperature Warning, High Temperature Warning, Pairing Indicator, Wi-Fi Status, Remote Control Indicator, State of Charge, Fan Indicator, Input Power, Output Power, Battery Failure Warning, Error Code, Carbon Monoxide Alert, Solar Panel Indicator, Smart Generator Indicator, Overload Warning, Extra Battery Indicator, Double Power Indicator, AC Output, DC Output, and USB-A/USB-C Output.

Battery Level Indicator: The ring fills up while charging. If the product is at 0% charge, the ring will flash.

Wi-Fi Status: After the IOT button has been pressed for 3 seconds, the Wi-Fi icon will flash to indicate the product is ready for pairing. Connect the product with the app, either (1) by finding the product on your phone's Wi-Fi connections or (2) by connecting the product to the internet. If the former, the icon will keep flashing; if the latter, the icon will not flash.

Error Code: Refer to the EcoFlow app for specific error codes.

Carbon Monoxide Alert: Appears whenever a connected EcoFlow Smart Generator automatically shuts off after detecting unsafe carbon monoxide levels.

3.3 General Product Usage

Product On, Product Off, LCD Screen On: Short press the Main Power Button to turn on the product; the LCD Screen will light up and the battery level indicator icon will display. The product enters sleep mode after 5 minutes of idle operation; the LCD Screen will automatically turn off. When the product senses any load change or operations, the LCD Screen will automatically light up. To turn the LCD Screen on or off, please short press the Main Power Button. To power off the product, press and hold the Main Power Button. The default product standby time is 2 hours. With other Power Buttons turned off and no other load access for 2 hours, the product will automatically shut down. The standby time can be set on the APP.

12V DC Output Port: With the Main Power Button turned on, short press the 12V DC Power Button to use the 12V DC Output port. Short press the 12V DC Power Button again to turn it off. With the 12V DC Power Button on, the product will not automatically shut down.

AC Output Port: With the Main Power Button turned on, short press the AC Power Button to use the AC Output ports. Short press the AC Power Button again to turn it off. The default standby time of the AC Output port is 12 hours. Without any load access for 12 hours, the AC Power will automatically turn off. Please turn off AC power button when not in use to save power consumption.

3.4 AC Charging

EcoFlow's X-Stream fast charge technology is specifically for AC charging, offering 1800W of max input power. You can control the charging power through the AC Charge Speed Switch. The default max input power for the AC charging speed is 400W, which can be modified in the EcoFlow app. In case of unusual situations where the AC input current remains higher than 20A, the X-Stream charging input port will initiate a self-protection function, and the Overload Protection Switch on the product will automatically pop up. After confirming that there is no product failure, you can press the Overload Protection Switch to resume charging.

Diagram Description: Two diagrams illustrate AC charging. The first shows a connection via an AC charging cable to the X-Stream Fast Charging port, indicating approximately 2.7 hours for a full charge. The second diagram shows the same connection, with an additional option to customize the charging power rate via the EcoFlow App, ranging from 200-1800W (default 400W).

The charging power can be adjusted through the AC Charge Speed Switch on the back of the product. You can set the charging power range in the EcoFlow App.

Please use the AC Charging Cable included in the package for fast charging. Do not use other cables to charge. Plug directly into an AC wall outlet and make sure that the wall output current is more than 15A. Otherwise, reduce the unit charging speed with the AC Charge Speed Switch. EcoFlow takes no responsibilities for any consequences caused by failures to follow instructions, including but not limited to charging with other AC charging cables.

3.5 Solar Charging

Users can connect solar panels in series as shown in the figure to recharge the product. The product supports 11-150V DC input, 15A max current, and 1600W max charging power.

Diagram Description: The diagram shows a solar panel array connected in series via MC4 connectors and a solar charging cable to the EcoFlow DELTA Pro's solar/car charging input port.

When using an EcoFlow solar panel to charge the product, please follow the instructions that come with the solar panel.

Before connecting the solar panel, please ensure that the solar panel's output voltage is within 150V to avoid product damages.

3.6 Car Charging

Users can recharge the product through the Car Outlet. It supports 12V/24V car chargers and an 8A default charging current.

Please charge using the car charger after you've started the car to avoid failure to start due to insufficient car battery. In addition, please make sure that the cigarette lighter of the Car Outlet and the Car Charger Input Cable are in good condition. EcoFlow takes no responsibilities for any losses or damages caused by failures to follow instructions.

Diagram Description: The diagram shows a car charging cable connected from a car's cigarette lighter socket to the DELTA Pro's car charger input port.

3.7 Using Smart Extra Battery

A single DELTA Pro can link with up to two Smart Extra Batteries at once for added capacity. Refer to the user manuals of the Smart Extra Battery and Smart Generator for detailed instructions.

Precautions:

1. Turn off both the Smart Extra Battery and DELTA Pro before connecting or disconnecting them.
2. Before using, make sure both DELTA Pro and Smart Extra Battery display the extra battery icon on their screens.
3. Turn off the Smart Battery before connecting or disconnecting it.
4. Do not touch the metal terminals of the Smart Extra Battery connector. If the metal terminals need to be cleaned, gently wipe them with a dry cloth.

Diagram Description: The diagram shows a DELTA Pro connected to a Smart Extra Battery.

3.8 APP

The EcoFlow App gives users the ability to control and monitor EcoFlow power stations remotely.

Read the EcoFlow App user guide and access the download link here: https://ecoflow.com/pages/ecoflow-app

Privacy Policy

By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term of Use and Privacy Policy, which you can access via the "About" section of the "User" page on the EcoFlow App or on the official EcoFlow website at https://ecoflow.com/pages/terms-of-use and https://ecoflow.com/pages/privacy-policy

QR Code: A QR code is provided for downloading the EcoFlow app.

3.9 X-Boost

With EcoFlow X-Boost technology, the product can power a 4500W Max device while the rated output power remains 3600W, avoiding operation failure due to overload protection.

X-Boost Tips:

1. X-Boost is not available when the AC output is turned on in a recharging state (in bypass mode).
2. X-Boost is not applicable for all electrical appliances; it's incompatible with appliances with strict voltage requirements and a rated power over 3600W. Appliances with voltage protection (such as precise instruments) are not supported. X-Boost mode is more suitable for heating devices. Please conduct your own tests with your devices with X-Boost enabled.

3.10 Emergency Power Supply (EPS)

The product supports EPS. When you connect the grid power to the AC Input Port of the product through an AC cable, you can power electrical devices through the AC Output Port (AC power will come from the grid and not the power station in this situation). In case of a sudden blackout, the product can automatically switch to the battery powered supply mode within 30ms. As a basic UPS function, this function does not support Oms switching. Please do not connect the product to any device that requires Oms UPS, such as data servers and workstations. Please test and confirm the compatibility before using the product. We recommend that you only charge one device at a time and avoid using multiple ones at the same time to avoid overload protection. EcoFlow takes no responsibilities for any device failures or data losses caused by failures to follow instructions.

Diagram Description: The diagram shows the DELTA Pro connected to a power source via an AC input port, and powering a computer via an AC output port, illustrating the EPS functionality.

4. FAQs

1. What battery does the product use? It uses high-quality LFP battery.
2. What devices can the product's AC output port power? With 3600W rated power and 7200W peak power, the product's AC output port can power most household appliances. Before you use it, we recommend that you confirm the power of the appliances first and ensure the power sum of all loaded appliances is lower than the rated power.
3. How long can the product charge my devices? The charging time is shown on the product's LCD Screen, which can be used to estimate the charging time of most appliances with stable power usage.
4. How can I know if the product is charging? When it's charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the charging indicator icon begins to rotate with the remaining battery percentage and the input power shown on the right of the circle.
5. How to clean the product? Please gently wipe it with a dry, soft, clean cloth or paper towel.
6. How to store the product? Before storing, please turn off the product first, and then store it in a dry, ventilated place at room temperature. Do not place it near water sources. For long-term storage, please discharge the battery to 30% and recharge it to 60% every three months to extend its battery life.
7. Can I bring the product on a plane? No.
8. How do I recharge DELTA Pro at 200V-240V in a 100V-120V region? The cable provided with your DELTA Pro won't plug into higher-voltage outlets, and you'll need a third party adapter/charging cable.

5. Troubleshooting

If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a restart, please stop using it immediately (do not try to charge or discharge). If you require any other assistance, please contact EcoFlow Customer Service.

6. What's in the Box

Diagram Description: The diagram shows the contents of the box: DELTA Pro, AC Charging Cable, Car Charging Cable, Solar Charging Cable, DC5521 to DC5525 Cable, Handle Cover, DELTA Pro to Smart Generator Adapter, and User Manual & Warranty Card.

7. Storage & Maintenance

1. Ideally, use and store the product between 20°C ~ 30°C (68°F ~ 86°F), and always keep it away from water, intense heat, and sharp objects. Do not store in temperatures above 45°C (113°F) or below -10°C (14°F) for an extended period.
2. Storing a battery with a low charge for a long period shortens its lifespan. DELTA Pro mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is about 60% before putting DELTA Pro into long-term storage, and then once every three months, discharge the battery to 30% and recharge it back to 60%.

8. FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.