DSC Alarm Communicator Installation Manual

This document serves as the installation manual for Digital Security Controls (DSC) alarm communicators, specifically detailing the setup and configuration for the following models:

• 3G2060: HSPA Cellular Alarm Communicator
• TL2603G: Dual-path Internet and HSPA Alarm Communicator
• TL260: Internet Alarm Communicator

Designed for professional installers, this manual provides comprehensive guidance on product features, installation procedures, programming options, safety precautions, and troubleshooting.

Key Information Covered

• Product Overview: Details on the capabilities and specifications of each communicator model.
• Installation: Step-by-step instructions for physically installing the communicators, including wiring and component mounting.
• Configuration & Programming: Guidance on setting up communication paths (Ethernet, Cellular), receiver options, and system parameters via keypad or DLS 5 software.
• Safety & Warnings: Crucial safety information and potential system limitations for installers and end-users.
• Placement Testing: Procedures for testing cellular signal strength and determining optimal antenna placement.
• Troubleshooting: Diagnostic information and solutions for common issues indicated by status LEDs and error codes.

The manual emphasizes adherence to safety guidelines and proper installation practices to ensure the reliable operation of these security system components. For detailed technical specifications and programming worksheets, refer to the respective sections within the document.