Reznor Heating Equipment Catalog

A comprehensive overview of Reznor's advanced heating solutions.

Reznor Unit Heaters

Introducing Reznor's NEW Unit Heaters, designed for efficient and reliable heating.

Featured Models: UDZ/UBZ/UEZ, UBX, UDX

Key Features:

External status indicating LED
7-segment display board
Hinged door with 1½ turn door latch
External terminal strip for 24-volt connections
External gas connector
Available for natural gas or LP
Premium models feature Reznor embossed on bottom
Aesthetically pleasing two-tone black and white powder coated paint scheme
Model UEZ features a MacroChannel® design on the secondary heat exchanger for easier maintenance.

Model Specifications:

Model	Application	Thermal Efficiency	Capacity	Warranty
UDX & UBX	Power Vented	82%	14 Capacities from 30-400,000 BTU	5 Years on Parts, 10 Years on the Heat Exchanger
UDZ & UBZ	Separated Combustion	82%	14 Capacities from 30-400,000 BTU	5 Years on Parts, 10 Years on the Heat Exchanger
UEZ	Separated Combustion	93%	130,000, 180,000, 260,000, 310,000 BTU

Legacy vs. Redesign Models:

Legacy Model	Redesign Model	Nomenclature	Designation
UDAP	UDX	U	Unit Heater
UDAS	UDZ	D	83% Axial Fan
UEAS	UEZ	E	93% Axial Fan
UDBP	UBX	B	83% Blower Fan
UDBS	UBZ	X	Standard Combustion
		Z	Separated Combustion

Note: Availability of some models (e.g., UDAS, UEAS, UDBP, UDBS) was announced for Fall 2021.

Other Heating Equipment Categories

This catalog also covers:

Duct Furnaces
Infrared Heaters
Wall Furnaces
Boilers (Gas and Oil)
Water Heaters
Heat Recovery

Duct Furnaces

Indoor, Gravity Vent, Gas, Spark Ignition

Designed for 80% thermal efficiency for indoor application with gravity venting. Used as heating components in heating, heating/cooling, or makeup air systems. Requires a separate blower system for air delivery. Features an aluminized steel heat exchanger with venturi-design tubes and flared ports with a stainless steel insert.

Supply voltage: 115 Vac
Control voltage: 24 Vac
Transformer included

Part No.	Input (BTUH)	CFM	Dimensions (In.) H x W x L			Flue Size (In.) Type
X75SI	75,000	610 to 1105	32 1/4 x 19 1/4 x 26	5 Round	160	$3,378.06
X100SI	100,000	815 to 1475	32 1/4 x 19 1/4 x 26	6 Round	170	$3,398.22
X125SI	125,000	1020 to 1840	32 1/4 x 22 x 26	7 Oval	200	$3,565.80
X150SI	150,000	1225 to 2210	32 1/4 x 27 1/2 x 26	8 Oval	220	$3,900.96
X175SI	175,000	1430 to 2580	32 1/4 x 27 1/2 x 26	8 Oval	230	$4,018.14
X200SI	200,000	1635 to 2945	35 1/4 x 33 x 26	8 Round	275	$4,420.08
X225SI	225,000	1840 to 3315	35 1/4 x 33 x 26	8 Round	290	$4,570.02
X250SI	250,000	2045 to 3685	35 1/4 x 41 1/4 x 26	10 Oval	350	$5,066.46
X300SI	300,000	2455 to 4420	35 1/4 x 41 1/4 x 26	10 Oval	360	$5,352.48
X350SI	350,000	2865 to 5160	35 1/4 x 46 3/4 x 26	12 Oval	390	$5,898.06
X400SI	400,000	3275 to 5895	35 1/4 x 52 1/4 x 26	12 Oval	420	$6,345.36

Unit Heaters - Power Vent, Fan Type, Gas, Spark Ignition

Next generation V3 series unit heater technology from Reznor. Glossy white cabinet finish with less visible hardware. Features include an outside terminal strip and gas nipple for easier access. The Tcore heat exchanger and single burner combustion system offer efficient operation. Includes integrated circuit board with diagnostics and a vent flo pressure switch.

Image description: A Reznor UDAP series unit heater, a compact, white rectangular unit.

UDAP Series (82-83% Thermal Efficiency):

Part No.	Input (BTUH)	CFM	Dimensions (In.) H x W x L
UDAP30	30,000	456	12 1/8 x 26 5/8 x 26	4	$1,397.34
UDAP45	45,000	629	12 1/8 x 26 5/8 x 26	4	$1,454.04
UDAP60	60,000	796	15 1/8 x 26 5/8 x 27	4	$1,530.90
UDAP75	75,000	972	15 1/8 x 26 5/8 x 27 5/8	4	$1,606.50
UDAP100	100,000	1361	23 1/8 x 26 5/8 x 28 5/8	4	$1,835.82
UDAP125	125,000	1556	23 1/8 x 26 5/8 x 29 3/8	4	$2,068.92
UDAP150	150,000	1921	20 1/8 x 38 3/16 x 42	5	$2,203.74
UDAP175	175,000	2242	20 1/8 x 38 3/16 x 42	5	$2,449.44
UDAP200	200,000	2562	20 1/8 x 38 3/16 x 42	5	$2,624.58
UDAP225	225,000	2882	26 1/8 x 38 3/16 x 42	5	$2,836.26
UDAP250	250,000	3202	26 1/8 x 38 3/16 x 42	5	$3,050.46
UDAP300	300,000	3843	34 1/8 x 41 x 42	6	$3,648.96
UDAP350	350,000	4483	34 1/8 x 41 x 42	6	$4,142.88
UDAP400	400,000	5123	34 1/8 x 41 x 42	6	$4,456.62

UDAS Series (82-83% Thermal Efficiency, Separated Combustion):

Features T Core2 titanium stabilized aluminized steel heat exchanger.

Part No.	Input (BTUH)	CFM	Dimensions (In.) H x W x L
UDAS30	30,000	456	12 1/8 x 26 5/8 x 26	4	$2,057.58
UDAS45	45,000	629	12 1/8 x 26 5/8 x 26	4	$2,325.96
UDAS60	60,000	796	15 1/8 x 26 5/8 x 27	4	$2,649.78
UDAS75	75,000	972	15 1/8 x 26 5/8 x 27 5/8	4	$2,743.02
UDAS100	100,000	1361	23 1/8 x 26 5/8 x 28 5/8	4	$3,134.88
UDAS125	125,000	1556	23 1/8 x 26 5/8 x 29 3/8	4	$3,487.68
UDAS150	150,000	1921	20 1/8 x 38 3/16 x 42	5	$3,892.14
UDAS175	175,000	2242	20 1/8 x 38 3/16 x 42	5	$4,021.92
UDAS200	200,000	2562	20 1/8 x 38 3/16 x 42	5	$4,310.46
UDAS225	225,000	2882	26 1/8 x 38 3/16 x 42	5	$4,731.30
UDAS250	250,000	3202	26 1/8 x 38 3/16 x 42	5	$5,116.86
UDAS300	300,000	3843	34 1/8 x 41 x 42	6	$5,537.70
UDAS400	400,000	5123	34 1/8 x 41 x 42	6	$6,543.18

UEAS Series (91-93% Thermal Efficiency, Separated Combustion):

Features New Tcore® titanium stabilized heat exchanger.

Part No.	Input (BTUH)	CFM	Dimensions (In.) H x W x L
UEAS130	131,000	2256	20 1/8 x 39 3/16 x 50 1/2	$5,368.86
UEAS180	175,000	2458	20 1/8 x 39 3/16 x 50 1/2	$5,726.70
UEAS260	260,000	4430	34 1/8 x 40 15/16 x 53 5/16	$6,912.36
UEAS310	305,000	4283	34 1/8 x 40 15/16 x 53 5/16	$8,510.04

Vent Caps & Kits

UDAS Vent Kit

Part No.	Style	UDAS Model	Price
REZ205895	Vertical	30 to 125	$577.92
REZ211762	Horizontal	30 to 125	$540.96
REZ205896	Vertical	150 to 250	$766.08
REZ205883	Horizontal	150 to 250	$720.90

UDAP Vent Cap

Part No.	Diameter (In.)	Price
REZ111848	4	$102.48
REZ111849	5	$119.28
REZ111850	6	$134.40

Electric Heaters

Standard Duty Suspended, Electric Unit Heater (EGEB Series)

Designed for areas such as commercial halls, stairwells, factories, warehouses, or shipping room installations. Can be mounted horizontally or vertically. Features include 208V, 240V, 277V, and 480V voltage options, with 3 to 5 kW capacity.

Part No.	Input (BTUH)	CFM	Dimensions (In.) H x W x L
EGEB3	10,000	308	16 1/2 x 15 3/4 x 10	39	$1,199.50
EGEB5	17,000	308	16 1/2 x 15 3/4 x 10	39	$1,113.84
EGEB7	26,000	600	24 1/2 x 22 x 10 7/8	59	$1,488.06
EGEB10	34,000	625	24 1/2 x 22 x 10 7/8	59	$1,954.26
EGEB15	51,000	915	24 1/2 x 22 x 16 1/4	76	$2,727.90
EGEB20	68,000	1300	24 1/2 x 22 x 16 1/4	76	$2,959.74

Hydronic Unit Heaters

Features a heat exchanger composed of 0.030" thick, 0.867" O.D. copper tubes and aluminum fins. Available for steam and hot water sources. Can be configured vertically or horizontally. Maximum heating capacity based on steam pressure at 2 psi, 60°F entering air.

Part No.	Capacity (BTUH)	CFM	FPM	Voltage	Amps	Dimensions (In.) H x W x L
WS1824	24,000	400	540	115/1/60	0.60	16 7/16 x 18 5/16 x 16 7/16	$822.78
WS2333	33,000	500	672	115/1/60	0.90	16 7/16 x 18 5/16 x 16 7/16	$951.30
WS4462	62,000	860	802	115/1/60	1.2	18 9/16 x 18 5/16 x 18 9/16	$1,365.84
WS6085	85,000	1250	860	115/1/60	1.9	20 11/16 x 18 5/16 x 20 11/16	$1,518.30
WS78110	110,000	1650	866	115/1/60	3.0	22 13/16 x 18 5/16 x 22 13/16	$1,801.80
WS96120	120,000	1550	642	115/1/60	1.8	24 15/16 x 19 3/16 x 24 15/16	$1,878.66
WS140175	175,000	2300	773	115/1/60	2.6	27 1/6 x 19 3/16 x 27 1/6	$2,318.40
WS190238	238,000	2850	793	115/1/60	3.4	29 3/16 x 20 3/16 x 29 3/16	$2,959.74
WS300350	350,000	4750	936	115/1/60	13.0	35 7/16 x 22 5/8 x 35 7/16	$4,118.94

Infrared Heaters

Surface Combustion, Gas Fired, High Intensity

Features include 115-volt operation, direct spark ignition with 100% safety shut-off, and a solenoid gas valve. Ceramic combustion surface temperature reaches up to 1850°F, achieving full intensity in under 30 seconds. Includes balanced suspension holes.

Part No.	Gas	Input (BTUH)	Dimensions (In.) H x W		Ship Wgt (Lbs.)	Price
RIHVL90	Propane Gas	90,000	8 1/2 x 18 3/8	25 1/4	42	$1,420.02
RIHN30	Natural Gas	30,000	8 1/2 x 18 3/8	16 5/8	23	$1,052.10
RIHN60	Natural Gas	60,000	8 1/2 x 18 3/8	16 5/8	30	$1,462.86
RIHVN100	Natural Gas	100,000	8 1/2 x 18 3/8	25 1/4	42	$1,462.86
RIHVN200	Natural Gas	200,000	8 1/2 x 18 3/8	42 1/2	55	$3,030.30

Direct Vent Wall Furnaces

Compact Series

Clean and cost-efficient comfort for smaller rooms. Slim, compact design for easy placement on any outside wall. Requires only one hole through the wall for venting. Features removable front panels for cleaning and servicing. Uses outside air for combustion, improving fuel economy. Features a uniquely designed burner for quieter operation and an automatic shut-off valve for safety.

Part No.	Gas	Input (BTUH)	Dimensions (In.) D x W x H
DV210SG-NAT*	Natural	10,000	9 3/8 x 16 1/4 x 21 3/8	42	$1,135.62
DV210SG-LP*	LP	10,000	9 3/8 x 16 1/4 x 21 3/8	42	$1,135.62
DV215SG-NAT*	Natural	15,000	9 3/8 x 20 1/4 x 24 7/8	60	$1,286.44

Standard Series

Part No.	Gas	Input (BTUH)	Dimensions (In.) D x W x H
DV25SG-NAT*	Natural	25,000	11 1/2 x 37 x 27 3/4	98	$1,600.80
DV25SG-LP*	LP	25,000	11 1/2 x 37 x 27 3/4	98	$1,599.62
DV35SG-NAT*	Natural	35,000	11 1/2 x 37 x 27 3/4	101	$1,738.82
DV35SG-LP*	LP	35,000	11 1/2 x 37 x 27 3/4	101	$1,738.82

*WARNING: This item may contain chemicals known to cause cancer and/or reproductive harm in the state of California.

Boilers

Cast Iron Boilers, Natural Draft, Gas (ARUBA4, Hot Water)

Features a cast iron heat exchanger, is field convertible to left side piping, and designed for installation on combustible floors. Includes stainless steel burners.

Part No.	Input (BTUH)	Heating Efficiency DOE (AFUE) Standard	Dimensions (In.) H x W x L			Vent Diameter (In.)
AWR038EL	38,000	82.8	39 1/2 x 9 3/4 x 31 1/2	4	234	$3,052.72
AWR070EL	70,000	82.9	39 1/2 x 12 7/8 x 31 1/2	4	284	$3,319.36
AWR105EL	105,000	82.9	39 1/2 x 15 3/8 x 31 1/2	5	334	$3,532.32
AWR140EL	140,000	83.0	39 1/2 x 18 1/2 x 31 1/2	6	384	$3,857.04
AWR175EL	175,000	83.1	39 1/2 x 21 1/2 x 31 3/4	7	434	$4,357.76
AWR210EL	210,000	83.1	39 1/2 x 24 5/8 x 33 1/2	7	484	$4,907.76
AWR245EL	245,000	83.2	39 1/2 x 27 5/8 x 33 1/2	8	533	$5,405.84

Cast Iron Boilers, Steam (BERMUDA, Steam)

Fully assembled, ready for installation or available as a knock-down package. Features a cast iron heat exchanger with a 12-year limited warranty and stainless steel burners with a lifetime limited warranty. Includes a built-in draft diverter.

Part No.	Input (BTUH)	Dimensions (In.) H x W		L	Vent Diameter (In.)	Ship Wgt (Lbs.)
BSI103ENP	103,000	40 1/4 x 16	28	5	400	$4,647.56
BSI138ENP	138,000	40 7/16 x 19 1/4	28	6	504	$5,135.20
BSI172ENP	172,000	40 7/16 x 22 1/2	28	6	589	$5,558.36
BSI207ENP	207,000	40 7/16 x 25 3/4	30	7	669	$6,265.08
BSI241ENP	241,000	40 7/16 x 32 1/4	30	7	745	$6,746.52

Cast Iron Boilers, Power Vent, Gas (CABO2, Hot Water)

Energy star qualified, exceeding 85% AFUE. Features powered intake and venting, using combustion air from outside. Includes advanced safety systems and easy installation. Features stainless steel burners.

Part No.	Input (BTUH)	H	W	L	Vent Diameter (In.)	Ship Wgt (Lbs.)	Price
CWD083NAT	82,500	36 5/8	19 3/4	22 1/8	3	315	$4,574.62
CWD083LP	82,500	36 5/8	19 3/4	22 1/8	3	315	$4,574.62

Cast Iron Boilers, Natural Draft, Oil (TOBAGO, Hot Water)

Features a swing-open burner door for easy service, Beckett oil burner, and a ceramic fiber target wall. Includes a draft regulator and a lifetime limited warranty on the cast iron hot water heat exchanger.

Part No.	Input (BTUH)	Output I=B=R (BTUH)	Output (Sq. Ft.)	Input (GPH)	Heating Efficiency DOE (AFUE) Standard	Length Without/with Burner Assembly (In.)	Tankless Coil (GPM)	Comments	Ship Wgt (Lbs.)
TWZ075BOL	91,000	79,000	0.65	85.8	16 1/2/33 1/2	Less Tankless Coil	560	$4,697.38
TWZ075BOT	91,000	79,000	0.65	85.8	16 1/2/33 1/2	3.00	With Tankless Coil	560	$4,958.48
TWZ100BOL	120,000	104,000	1.0	84.3	16 1/2/33 1/2	Less Tankless Coil	400	$4,697.38
TWZ100BOT	120,000	104,000	1.0	84.3	16 1/2/33 1/2	3.25	With Tankless Coil	560	$4,958.48
TWZ125BOL	152,000	132,000	1.25	84.9	21 1/2/38 1/2	Less Tankless Coil	680	$5,306.92
TWZ125BOT	152,000	132,000	1.25	84.9	21 1/2/38 1/2	3.75	With Tankless Coil	680	$5,567.16
TWZ150BOL	179,000	156,000	1.5	83.8	21 1/2/38 1/2	Less Tankless Coil	680	$5,306.92
TWZ150BOT	179,000	156,000	1.5	83.8	21 1/2/38 1/2	4.00	With Tankless Coil	680	$5,567.16
TWZ175BOL	210,000	183,000	1.75	83.5	26 1/2/43 1/2	Less Tankless Coil	800	$6,161.14
TWZ175BOT	210,000	183,000	1.75	83.5	26 1/2/43 1/2	4.25	With Tankless Coil	800	$6,422.24

Boilers (Continued)

Kingston, Steam

Features a drain valve, draft regulator, and oil solenoid valve. Includes a twelve-year warranty on the cast iron steam heat exchanger. Equipped with connections for a Mega-Stor indirect domestic water heater.

Part No.	Input (BTUH)	Output I=B=R (BTUH)	Output (Sq. Ft.)	Input (GPH)	Heating Efficiency DOE (AFUE) Standard	Length Without/with Burner Assembly (In.)	Tankless Coil (GPM)	Comments	Ship Wgt (Lbs.)	Price
KSZ100LC	119,000	89,000	370	1.0	83.5	16 1/2/33 1/2	Less Tankless Coil	570	$5,521.18
KSZ100WC	119,000	89,000	370	1.0	83.5	16 1/2/33 1/2	2.50	With Tankless Coil	570	$6,064.50
KSZ125LC	149,000	112,000	467	1.25	84.2	21 1/2/38 1/2	Less Tankless Coil	690	$6,265.80
KSZ125WC	149,000	112,000	467	1.25	84.2	21 1/2/38 1/2	2.75	With Tankless Coil	690	$7,008.48
KSZ175LC	207,000	155,000	646	1.75	83.1	26 1/2/43 1/2	Less Tankless Coil	810	$6,895.12
KSZ175WC	207,000	155,000	646	1.75	83.1	26 1/2/43 1/2	3.25	With Tankless Coil	810	$7,392.52

Wall Mounted Condensing Boilers, Gas-Fired, Hot Water, Phantom Combi

Energy efficient boiler with 95% AFUE, capable of heating a home and providing domestic hot water. Features a 10:1 turndown ratio and a touch screen diagnostic display.

Part No.	Input (BTUH)	Output I=B=R (BTUH)	Heating Capacity (BTUH)	Heating Efficiency DOE (AFUE) Standard	Dimensions (In.) H x W x L			Ship Wgt (Lbs.)	Price
PHNTM135CB	12,000-120,000	97,000	112,000	95.0	30 x 15 x 17	152	$4,130.08

Wall Mounted Condensing Boilers, Gas-Fired, Hot Water, Phantom

Features a 10:1 turndown ratio and intelligent control to adapt to demand and outdoor conditions. Includes a stainless steel water tube heat exchanger and AFUE up to 94%.

Part No.	Input (BTUH)	Output I=B=R (BTUH)	Heating Capacity (BTUH)	Heating Efficiency DOE (AFUE) Standard	Dimensions (In.) H x W x L
PHNTM080B	8,000-80,000	64,000	74,000	95.0	29 1/16 x 16 5/8 x 17	149	$4,187.34
PHNTM100B	10,000-100,000	82,000	94,000	95.0	29 1/16 x 16 5/8 x 17	158	$4,323.94
PHNTM120B	12,000-120,000	97,000	112,000	95.0	29 1/16 x 16 5/8 x 17	162	$4,552.18
PHNTM150B	15,000-150,000	123,000	142,000	94.0	29 1/16 x 16 5/8 x 21	188	$4,930.90
PHNTM180B	18,000-180,000	147,000	169,000	95.0	29 1/16 x 16 5/8 x 21	188	$5,268.74

Condensing Boilers, Gas-Fired, Hot Water, Phantom-X

Modulating burner with a 10:1 turndown ratio, supporting up to 8 boilers. Features smart boiler features like domestic priority and freeze protection. Includes a stainless steel water tube heat exchanger and 95% AFUE.

Part No.	Input (BTUH)	Output I=B=R (BTUH)	Heating Capacity (BTUH)	Heating Efficiency DOE (AFUE) Standard	Dimensions (In.) H x W x L
PHNTM210	42,000-210,000	169,000	194,000	95.0	32 3/16 x 16 11/16 x 23 15/16	206	$9,420.08
PHNTM285	57,000-285,000	228,000	262,000	95.0	43 7/16 x 16 11/16 x 21 13/16	256	$13,079.00
PHNTM399	80,000-399,000	326,000	375,000	94.0	43 7/16 x 16 11/16 x 28 7/8	304	$17,594.36
PHNTM500	100,000-500,000	326,000	475,000	95.0	35 x 16 11/16 x 44 7/8	375	$21,816.06

Water Heaters

Heavy Duty Water Gas Heaters

Professional Achiever Plus® Heavy Duty gas water heaters exceed ANSI standards for flammable vapor ignition resistance. Recovery Capacity: 72.8 gallons per hour. Features Guardian System™™ & Sensor for safety and an eco-friendly burner.

Part No.	Tank Capacity (Gal.)	Style	Gas	Recovery rise to 100°F (GPH)	Height (In.)	Dia. (In.)	Ship Wgt (Lbs.)	Price
PRO+G7576NRU	75.0	Tall	NAT	72.8	64	26 1/4	320.00	$1,842.60

Professional Achiever Electric Water Heaters

Engineered for longer life with resistored heating elements and premium grade anode rod. Features include .93 UEF, isolated tank design, and dual stainless steel elements. Recovery: 21 GPH at a 90° F rise.

Part No.	Tank Capacity (Gal.)	Style	Recovery rise to 90°F (GPH)	Height (In.)	Dia. (In.)	Ship Wgt (Lbs.)	Price
PROE38S2RU95B	38.0	Short	21.0	32 5/8	23	108.00	$890.22
PROE40M2RU95	40.0	Medium	21.0	50 1/2	20 1/4	106.00	$876.90
PROE50M2RU95	50.0	Medium	21.0	50 1/2	23	132.00	$788.10
PROE50T2RU95	50.0	Tall	21.0	61 5/8	20 1/4	121.00	$876.90

Atmospheric Water Gas Heaters

Professional Classic Plus™™ atmospheric gas water heaters offer efficient operation and eco-friendly design. Features premium grade anode rod and Guardian System™™ & Sensor.

Part No.	Tank Capacity (Gal.)	Style	Gas	Recovery rise to 90°F (GPH)	Height (In.)	Dia. (In.)	Ship Wgt (Lbs.)	Price
PROG40S38NRU62	40.0	Short	NAT	38.4	50 1/4	21 3/8	125.00	$963.48
PROG4038NRU62	40.0	Tall	NAT	38.4	61 1/2	19	127.00	$925.74
PROG5038NRU60	50.0	Tall	NAT	38.4	61 1/4	20 1/2	150.00	$1,061.16

Professional Achiever Power Vent Gas Water Heaters

Energy Star® rated, offering up to 150 foot vent runs and energy efficiency. Features a self-diagnostic system, eco-friendly burner, and Rheem exclusive R-Tech anode rod.

Part No.	Tank Capacity (Gal.)	Style	Gas	Recovery rise to 90°F (GPH)	Height (In.)	Dia. (In.)	Ship Wgt (Lbs.)	Price
PROG4040NRU67PV	40.0	Tall	NAT	40.4	66 1/4	19 3/4	140.00	$1,918.08
PROG5042NRU67PV	50.0	Tall	NAT	42.4	65 1/2	21 3/4	170.00	$2,095.68

Standard Tankless Water Heaters, Mid-Efficiency

Features .81 UEF, all-copper heat exchanger, and high-altitude capability. EcoNet Enabled for connectivity. Offers a water savings setting and low flow activation.

Part No.	Type	Gas	Energy Factor	Input (BTUH)	Capacity (GPM)	Vent Diameter (In.)	Temp. (°F) at 67° / at 45°	Flow GPM at 67° / at 45°	Dimensions (In.) H x W
RUTG70DVLN*	Indoor, Direct	NAT	0.82	11,000-160,000	6.4 Max	3" by 5" concentric	85 to 140	3.8 / 5.6	25 5/8 x 13 7/8	$1,444.04
RUTG84DVLN*	Indoor, Direct	NAT	0.82	11,000-180,000	8.4 Max	3" by 5" concentric	85 to 140	4.5 / 6.7	25 5/8 x 13 7/8	$1,763.22
RUTG84DVLP*	Indoor, Direct	LP	0.82	11,000-180,000	8.4 Max	3" by 5" concentric	85 to 140	4.5 / 6.7	25 5/8 x 13 7/8	$1,763.22
RUTG84XLN*	Outdoor	NAT	0.82	11,000-180,000	8.4 Max	N/A	85 to 140	4.5 / 6.7	23 5/8 x 13 7/8	$1,763.22
RUTG84XLP*	Outdoor	LP	0.82	11,000-180,000	8.4 Max	N/A	85 to 140	4.5 / 6.7	23 5/8 x 13 7/8	$1,763.22
RUTG95DVLN*	Indoor, Direct	NAT	0.82	11,000-199,900	9.5 Max	3" by 5" concentric	85 to 140	5.0 / 7.4	25 5/8 x 13 7/8	$2,232.64
RUTG95DVLP*	Indoor, Direct	LP	0.82	11,000-199,900	9.5 Max	3" by 5" concentric	85 to 140	5.0 / 7.4	25 5/8 x 13 7/8	$2,232.64
RUTG95XLN*	Outdoor	NAT	0.82	11,000-199,900	9.5 Max	N/A	85 to 140	4.9 / 7.4	23 5/8 x 13 7/8	$2,232.64
RUTG95XLP*	Outdoor	LP	0.82	11,000-199,900	9.5 Max	N/A	85 to 140	4.9 / 7.4	23 5/8 x 13 7/8	$2,232.64

Standard Tankless Water Heaters, High-Efficiency

Features up to .93 UEF, stainless steel condensing heat exchanger, and ultra low NOx burner. EcoNet Enabled for connectivity. Offers easy installation and service, including a 2" venting system and high-altitude capability.

Part No.	Type	Gas	Energy Factor	Input (BTUH)	Capacity (GPM)	Vent Diameter (In.)	Temp. (°F) at 45°	Flow GPM at 45°	Dimensions (In.) H x W
RUTGH84DVLN*	Indoor, Direct	NAT	0.93	11,000-157,000	8.4 Max	2" 3" or 4" PVC 2-Pipe	4.6	6.7	27 1/2 x 18 1/2	$2,079.36
RUTGH84DVLP*	Indoor, Direct	LP	0.93	11,000-157,000	8.4 Max	2", 3" or 4" PVC 2-Pipe	4.6	6.7	27 1/2 x 18 1/2	$2,079.36
RUTGH95DVLN*	Indoor, Direct	NAT	0.93	11,000-199,900	9.5 Max	2", 3" or 4" PVC 2-Pipe	5.7	8.5	27 1/2 x 18 1/2	$2,358.70
RUTGH95DVLP*	Indoor, Direct	LP	0.93	11,000-199,900	9.5 Max	2", 3" or 4" PVC 2-Pipe	5.7	8.5	27 1/2 x 18 1/2	$2,358.70
RUTGH95XLN*	Outdoor	NAT	0.93	11,000-199,900	9.5 Max	N/A	5.6	8.5	27 1/2 x 18 1/2	$2,358.70
RUTGH95XLP*	Outdoor	LP	0.93	11,000-199,900	9.5 Max	N/A	5.6	8.5	27 1/2 x 18 1/2	$2,358.70

Professional Classic® Tankless Electric Water Heater

Features robust copper immersion heating elements with brass top, simple installation, and digital temperature display. External controls allow temperature adjustment in 1° increments. Includes a 5-year heating chamber warranty.

Part No.	kW Rating	Voltage	Max. Flow Rate	Capacity (GPM)	Dimensions (In.) H x W
RTEX8	8.0	240	4.8 GPM	0.3-4.8	12 5/8 x 8 1/4	$514.68
RTEX11	11.0	240	4.8 GPM	0.3-4.8	12 5/8 x 8 1/4	$611.94
RTEX13	13.0	240	4.8 GPM	0.3-4.8	12 5/8 x 8 1/4	$849.46
RTEX18	18.0	240	7.0 GPM	0.3-7.0	18 1/4 x 14 1/2	$954.02
RTEX24	24.0	240	7.0 GPM	0.3-7.0	18 1/4 x 17 5/8	$1,165.18
RTEX36	36.0	240	8.0 GPM	0.3-8.0	18 1/4 x 21 5/8	$1,916.78

Tankless Water Heater Accessories

Vent Kits

Vent kits for Rheem tankless water heaters. 1 required on all installations.

Part No.	Description	Application	Price
SP20286	Horizontal Termination Kit for 3" PVC	High Efficiency (RTGH)	$55.76
RTG20210	Horizontal Vent Termination Kit. Contains 94° elbow, long termination, (1) 12" wall plate and screws. For up to 10" walls. Can be extended.	Standard (RTG)	$194.00
RTG20211	Vertical Vent Termination Kit. Contains storm collar, 6/12 to 12/12 pitched cone flashing, vertical termination with rain caps. Does not include vertical vent pipe.	Standard (RTG)	$248.02
RTG20231	Low-Profile Termination Kit for 2" x 4" wall. Can be extended.	Standard (RTG)	$197.54
RTG20234	Low-Profile Termination Kit for 2" x 6" wall. Can be extended.	Standard (RTG)	$176.80

Valve Kits

Service valve kits with pressure relief valve, lead free.

Part No.	Description	Application	Price
RTG20220AB	Service valve kits with pressure relief valve, lead free	Both (RTG/H)	$192.24

Controls, Boxes, Flush Kit

Part No.	Description	Application	Price
RTG20040	EZ-Link™ Cable. Connect two tankless water heaters together in a manifold so that they communicate together and operate as a single unit.	Both (RTG/H)	$43.04
RTG20213A	Manifold Controller Kit. Mounts inside a single tankless unit and connects up to 5 additional units for a total of 6. Type Q cables necessary.	Both (RTG/H)	$223.18
RTG20213B	Control Cable, MIC-Q-1, 1 Ft.	Both (RTG/H), RTG20213A	$24.98
RTG20213C	Control Cable, MIC-Q-6, 6 Ft.	Both (RTG/H), RTG20213A	$33.34
RTG20213D	Control Cable, MIC-Q-18, 18 Ft.	Both (RTG/H), RTG20213A	$41.66
RTG20006DW	Self-diagnostic Main Remote Control (Included)	Both (RTG/H)	$156.20
RTG20006DU	Bath Remote Control	Both (RTG/H)	$130.64
RTG20217XG	Outdoor Pipe Cover	Standard (RTG)	$133.86

Heat Recovery

AQUECOIL

Designed to fit your air handler; ICP may also fit Carrier/BDP models. Features a baked enamel finish, is fully insulated with high R rigid foam, and uses any hot water source with sufficient BTU.

Part No.	W (In.)	L (In.)	Nominal Tons	Use with	Price
C1	14 5/16	22 1/16	1 1/2 to 2	Arcoaire	$772.30
C2	17 5/8	22 1/16	3	Arcoaire	$840.00
C3	21 1/8	22 1/16	3 1/2 to 4	Arcoaire	$941.54
C-4	24 11/16	22 1/16	5	Arcoaire	$1,064.00
C-5	25 3/4	22 1/16	6	Arcoaire	$1,101.52
RH1	17 1/2	22 1/16	1 1/2 to 3	Thermal Zone	$840.00
RH2	21	22 1/16	3 to 4	Thermal Zone	$941.54
RH3	24 1/2	22 1/16	4 to 5	Thermal Zone	$1,064.60

HOT GAS TO WATER

Designed to recover heat removed by refrigeration or air conditioning systems. Features stainless steel outer jacket and recovery 25 ton input, 80°F rise = 112 GPH. Includes two corrosion protection anodes.

Part No.	Nb. of Circuits	Per Circuit Capacity (Tons)	Tank Capacity (Gal.)	Height (In.)	Diameter (In.)	Ship Wgt (Lbs.)	Price
D5093779	1	.5 thru 4	50.0	53 7/8	21 3/4	225	$3,372.50
D5093780	2	.5 thru 4	50.0	53 7/8	21 3/4	225	$3,847.50
D2120A1*	2	3 thru 15	20.0	62	29 1/2	430	$4,977.50
DE120	2	3 thru 15	20.0	62	29 1/2	430	$5,592.50
DH120	2	7 thru 35	20.0	62	29 1/2	430	$5,762.50

*Includes aquastat.

	Reznor Vertical Louver Kit Installation Guide for Unit Heaters (Option CD1) Installation instructions for the Reznor Option CD1 Vertical Louver Kit, designed for UBX, UBZ, UDX, UDZ, and UEZ model unit heaters. Includes component lists and step-by-step assembly guidance.
	Reznor Gas Conversion Kit Installation for Gas-Fired Unit Heaters This document provides installation instructions for Reznor gas conversion kits for various gas-fired unit heater models, including UBX, UBXC, UBZ, UDX, UDXC, UDZ, UDAP, UDAS, UDBP, and UDBS. It details component selection, safety precautions, and installation steps for converting between natural gas and propane, as well as for high-elevation installations.
	Reznor V3 Series Fan-Type Unit Heaters Installation and Operation Manual Comprehensive installation and operation manual for Reznor V3 Series Fan-Type Unit Heaters, covering models UDAP and UDAS. Includes safety precautions, installation codes, dimensions, technical data, high altitude operation, combustion air requirements, location, hanging, gas piping, electrical connections, ignition system, troubleshooting, and maintenance procedures.
	Reznor Stepdown Transformer Kit Installation Guide for Gas-Fired Unit Heaters Detailed installation instructions for Reznor stepdown transformer kits (CG1, CG2, CG4) for UDAP, UDAS, UDX, UDZ, UDBP, UDBS, UBX, and UBZ gas-fired unit heaters. Includes component lists, wiring guidance, and safety precautions.
	Reznor Downturn Nozzle Kit Installation Guide for Unit Heaters Installation instructions and component lists for Reznor downturn nozzle kits (OPT-CD2,3,4,5) for UBX, UBXC, UBZ, UDX, UDXC, UDZ, UEZ, and UWS unit heaters.
	Reznor Vertical Louver Kit Installation Guide for Gas-Fired Unit Heaters (OPT-CD1) Installation instructions for the Reznor OPT-CD1 Vertical Louver Kit, designed for gas-fired unit heaters (models UBX, UBXC, UBZ, UDX, UDXC, UDZ, UEZ). Includes component list and step-by-step assembly guide.
	Reznor Downturn Nozzle Kit Installation Guide This guide provides detailed instructions for installing Reznor downturn nozzle kits (CD2, CD3, CD4, CD5) on various Reznor unit heater models including UBX, UBXC, UBZ, UDX, UDXC, UDZ, UEZ, and UWS. It covers kit components and step-by-step installation procedures for both gas-fired and hydronic units.
	Reznor Relay Kit Installation for Multiple Heater Control (CL31/CL32) Installation guide for Reznor CL31/CL32 relay kits, enabling multi-heater control for UBX, UBZ, UDX, UDZ, and UEZ models. Covers safety, components, and wiring.