PETKIT Eversweet Solo Instruction Manual - CT-W1
Introduction
Welcome to the PETKIT Eversweet Solo, an intelligent pet drinking fountain designed to provide your pet with fresh, filtered water.
Safety Precautions
- Read all instructions before use.
- This device is for indoor use only.
- Ensure the power adapter is compatible with your local power supply.
- Keep the power cord away from water.
- Do not immerse the pump or power adapter in water.
- Unplug the device before cleaning or maintenance.
- Not intended for use by children without adult supervision.
Product Components
The PETKIT Eversweet Solo includes the following components:
- Water Tank: The main reservoir for water.
- Lid: Covers the water tank.
- Dispensing Spout: Where water is dispensed.
- Water Pump: Circulates and filters water.
- Filter System: Includes a filter to purify water.
- Power Adapter: Connects the device to a power source.
- Base: Houses the pump and electronics.
[Diagram: A visual representation showing the assembled PETKIT Eversweet Solo with labels pointing to the Water Tank, Lid, Dispensing Spout, Filter System, Pump, and Power Adapter.]
Setup and Installation
- Place the PETKIT Eversweet Solo on a flat, stable surface.
- Assemble the filter system according to the instructions.
- Fill the water tank with fresh, clean water. Do not exceed the MAX fill line.
- Place the lid securely on the water tank.
- Connect the water pump to the power source inside the base.
- Plug the power adapter into a wall outlet and connect it to the device.
- The device will begin operating, circulating and filtering the water.
Operation
The PETKIT Eversweet Solo operates automatically, ensuring a continuous supply of fresh water. The filtration system helps remove impurities and odors.
[Icon: A water drop emoji ? indicating water flow.]
Maintenance and Cleaning
Regular cleaning is essential for optimal performance and hygiene.
- Daily: Refill water tank if necessary.
- Weekly:
- Unplug the device.
- Empty the water tank.
- Wash the water tank, lid, and dispensing spout with mild soap and water. Rinse thoroughly.
- Clean the water pump by rinsing it under running water. Ensure no debris is blocking the impeller.
- Replace the filter cartridge as recommended (typically every 1-3 months, depending on usage and water quality).
- Monthly:
- Disassemble and clean the pump more thoroughly.
[Icon: A brush emoji ? for cleaning.]
[Icon: A calendar emoji ? indicating filter replacement schedule.]
Troubleshooting / FAQ
- Q: The device is not dispensing water.
- A: Check if the power adapter is properly connected. Ensure the water level is sufficient. Verify the water pump is clean and not blocked. Make sure the filter is correctly installed.
- Q: The water is not circulating.
- A: Ensure the pump is submerged in water. Check for any blockages in the pump or tubing. Confirm the power connection is secure.
- Q: How often should I replace the filter?
- A: It is recommended to replace the filter every 1-3 months. Refer to the product packaging or PETKIT website for specific filter model compatibility.
- Q: Can I use tap water?
- A: Yes, tap water can be used, but filtered water is recommended for best results and to prolong the life of the pump and filter.
Specifications
Model: CT-W1 (Eversweet Solo)
Power Input: AC 100-240V, 50/60Hz
Power Output: DC 5V, 1A
Capacity: 2L
Material: BPA-free ABS plastic
Dimensions: [Placeholder dimensions, e.g., 200mm x 200mm x 150mm]
Weight: [Placeholder weight, e.g., 800g]
Warranty Information
PETKIT offers a limited warranty on its products. Please refer to the official PETKIT website or the warranty card included with your product for detailed terms and conditions.
