Child Safety Cabinet Locks

VEVOR is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and may not apply to all product categories. Please verify savings carefully when placing an order.

Product Overview

This document provides instructions for the VEVOR Child Safety Cabinet Locks, Model DC004. The image shown is for reference; please refer to the actual product.

Need Help? Contact Us!

For product questions or technical support, please contact:

Technical Support and E-Warranty Certificate
www.vevor.com/support

This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret this user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notice for technology or software updates.

⚠️ Warning: To reduce the risk of injury, users must read the instructions manual carefully.

Installation Instructions

Follow these steps to install the child safety cabinet locks:

1. Step 1: Carefully peel off the release paper from the catcher's backing tape. Do NOT touch the adhesive.

   [Image Description: A hand is shown peeling a white release paper from the adhesive backing of the cabinet lock's catcher component.]

2. Step 2: Fix the position of the catcher to meet the distance of the lock. Ensure the catcher and the drawer/cabinet door side edge are in the same line.

   [Image Description: A hand is positioning the catcher component on the edge of a cabinet or drawer. An indicator shows a 90-degree angle, suggesting proper alignment.]

3. Step 3: Carefully peel off the release paper from the lock component. Do NOT touch the adhesive.

   [Image Description: A hand is shown peeling a white release paper from the adhesive backing of the main lock mechanism component.]

4. Step 4: Close the drawer/cabinet door. The adhesive lock will stick to the cabinet door automatically. Press the lock for 10 seconds to fix it firmly.

   [Image Description: The lock mechanism is shown attached to the inside of a cabinet door. Text indicates to close the door and press the lock firmly.]

5. Step 5: Remove the installation cradle fixture. Press the catcher firmly for 10 seconds to ensure it sticks securely.

   [Image Description: The lock mechanism is shown on the cabinet door, with an installation cradle being removed. Text indicates pressing for 10 seconds.]

6. Step 6: Turn on the lock button; the lock spring bolt will then engage.

   [Image Description: The lock mechanism is shown in its engaged state, with text indicating the spring bolt is now functional.]

7. Step 7: When the cabinet door is closed with the magnetic lock engaged, use the magnetic key to open it.

   [Image Description: A hand is using a magnetic key to unlock a cabinet door that is secured by the VEVOR child safety lock.]

Caution and Warning

Caution:

• Clean and dry the surface where the lock and catcher will be attached. Do NOT touch the adhesive part.
• Do NOT use the magnetic lock within 24 hours after installation to allow the adhesive to set properly.
• The magnetic lock operates effectively in indoor temperatures between -10°C and 40°C.

Warning:

• There is NO substitute for proper adult supervision. This product is a deterrent. Discontinue use when the child is able to open it.
• This product is NOT a toy. Do NOT let children play with it.

Product Parameter

Manufacturer Information

Manufacturer: Guangzhou Prodigy Daily -Production Co., Ltd.

Address: 101,201,301, No.83-3 Beilong Road, Dagang Town, Nansha District, Guangzhou 511400, Guangdong, China

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD, NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Tel: +1 (856) 422-2999

Email: support1@vevor.com

Website: www.vevor.com/support