Instruction Manual for VEVOR models including: 25-45-3.4, 25-45-3.4 Bathroom Floor Cabinet, 25-45-3.4, Bathroom Floor Cabinet, Floor Cabinet, Cabinet
BATHROOM FLOOR CABINET MODEL: 25-45-3.4 MODEL:25-45-3.4 BATHROOM FLOOR CABINET <Picture Only For Reference > This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. 1 IMPORTANT SAFEGUARDS WARNING: Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property. Assembly precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep the assembly area clean and well-lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble if tired or when under the influence of alcohol, drugs or medication. 6. The product capabilities apply to properly and completely assembled products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Cabinet. 8. If possible, you can use power tools to make assembly easier. 9. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area. Use precautions 1. DO NOT SIT OR STAND ON THIS ITEM. 2. This product is not a toy. Do not allow children to play with or near this item. 3. Do not exceed specified weight capacities. 4. Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded the Cabinet. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged. SAVE THESE INSTRUCTIONS 2 PLATE LIST 3 ACCESSORIES LIST 4 STEP1 ASSEMBLY STEP M-CLx1 M-CRx1 M6×35 Ax21 M3×12 Dx4 Lx2 5 STEP2 M6×35 Ax9 Lx2 6 STEP3 M6×35 Ax8 7 STEP4 STEP5 12×10 Bx6 Fix the door suction holder F-1 to plate No. 4 with screw E M6×35 Ax4 8 M3×14 Ex2 F-1x1 STEP6 STEP7 12×10 Bx4 M5x40 Cx2 12×10 M5x40 Bx2 Cx2 9 STEP8 STEP9 12×10 Bx18 M6×35 Ax4 10 STEP10 12×10 Bx4 11 STEP11 M4×12 Gx20 12 STEP12 Fix the handle F-2 to the No. 11 plate with screw D M3×12 M4×16 Dx1 F-2x1 Hx2 Jx1 Kx1 STEP13 Fix the handle F-2 to the No. 11 plate with screw D M3×12 M4×16 Dx1 F-2x1 Hx2 Jx1 Kx1 13 STEP14 Repeat 3 times STEP14 STEP15 M6×35 Ax4*3 Repeat 3 times STEP15 14 M5x40 Cx4*3 STEP16 Repeat 3 times STEP16 STEP17 12×10 Bx4*3 M6×35 Ax5 15 M4×16 Jx2 Kx2 STEP18 STEP19 M5x40 Cx4 12×10 Bx5 M5x40 Cx1 16 STEP20 M-DLx1 M-DRx1 Fix the slide to the drawer with screw D M3×12 Dx4 17 STEP21 Press whit your hand NOTE:Pay special attention to the direction of the door when installing the door in this step. Once the installation is wrong, the door assembly cannot be taken out here alone. 18 STEP22 19 STEP23 NOTE:The product provides 3 installation heights of shelf(just Upper space), then you can adjust the position of the laminate according to the space height you need. 20 STEP24 Nx2 21 PRODUCT PARAMETER Model Colour Grade Product Size(D×W×H) 25-45-3.4 White P2 300×800×810mm(11.8×31.5×31.9in) * Products such as specifications, appearance, and design are subject to modification without prior notice. 22 Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH EC REP Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. UK REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AXWPS 文字