Munchkin Miracle® 360° Hydration Bottle

Included Parts

The bottle includes the following components:

• Valve
• Collar
• Sealing Ring
• Cup

Diagram Description: Visual representation of the bottle's components laid out separately, labeled in English, French, and Spanish.

Important Information & Warnings

CAUTION: Inspect before use. Do not boil or sterilize. Discard and replace at first sign of damage. Discard all packaging components before use. To prevent burns, do not microwave the cup or use with hot liquids. Do not bite or chew on valve. Do not use with carbonated beverages or pulpy juices.

(Note: This information is also provided in French and Spanish.)

How to Clean

Follow these steps for cleaning:

1. Lift and pull the center tab to detach the valve from the collar.
2. Unscrew the collar from the cup.
3. Before washing, carefully remove the sealing ring from the underside of the collar by lifting its pull tab.
4. Always wash all parts before use.
5. Rinse all components with warm water immediately after each use.
6. Wash all parts in mild soapy water or on the top rack of a dishwasher.
7. Always store disassembled to allow parts to dry completely.

Diagram Description: Illustrations detailing the disassembly process for cleaning: detaching the valve, unscrewing the collar, and removing the sealing ring.

How to Use

Follow these steps to assemble and use the bottle:

1. Press the sealing ring into the collar.
2. To ensure a leak-proof seal, align the sealing ring's pull tab with the corresponding gap in the collar.
3. Place the collar onto the cup and tighten it.
4. Press the valve's center tab firmly onto the collar until it locks into place.
5. You can drink from any side of the cup. Simply tilt the cup towards you and suck on the valve's edge. Do not bite the edge.

Diagram Description: Visual guide showing the assembly steps: inserting the sealing ring, aligning the tab, attaching the collar, and securing the valve. It also illustrates how to drink from the cup by tilting and sucking.