HILTI SDT 9 Fastening System

Components and Models

The HILTI SDT 9 fastening system includes various models and accessories:

• SDT 9-M: Main tool body.
• S-SY SDT: Accessory for the SDT 9 system.
• SDT 9-NP B: Another model or accessory.
• SDT 9-NP R: Another model or accessory.
• ST 2000-22 / ST 1800: Compatible power sources (likely cordless screwdrivers/drills).

Operational Guide

Step 1: Tool Handling

Hold the main tool body (SDT 9-M) with the handle. The diagram shows the correct grip and orientation for operation.

Step 2: Attaching S-SY SDT Accessory

Insert the S-SY SDT accessory into the designated port on the main tool body. Secure it by following the indicated steps (likely a push and lock mechanism).

Step 3: Connecting Power Source

Align the power source (e.g., ST 2000-22 or ST 1800) with the connection point on the SDT 9 tool. Insert and engage the locking mechanism, indicated by numbered steps 1, 2, 3.

Step 4a: Configuration Detail

Illustrates a specific attachment or adjustment, showing components labeled 1, 2, 3, and 4.

Step 4b: Alternative Configuration

Depicts an alternative setup or accessory connection, with components labeled 1 and 2.

Step 4c: Further Configuration

Shows another configuration detail, with components labeled 1 and 2.

Step 5: Connection Point

A close-up view of a connection point, showing components labeled 1 and 2, indicating proper engagement.

Step 6: Engagement Confirmation

Perform the action until a "click!" ? is heard, confirming secure engagement of components.

Step 7: Component Insertion

Insert component labeled 1 into the tool, followed by component labeled 2, as indicated.

Step 8: Double Engagement Confirmation

Perform the action until two "clicks!" ?? are heard, confirming secure engagement.

Fastener Installation

Step 9a: Fastener Insertion (Type 1)

The tool is shown driving a fastener into a material. The diagram illustrates the process with numbered steps and a checkmark ✔️ indicating successful insertion.

Step 9b: Fastener Insertion (Type 2)

Another fastener insertion scenario is depicted, showing a different material or fastener type, with a checkmark ✔️.

Step 9c: Fastener Insertion (Type 3)

Depicts fastener insertion into a material, with a checkmark ✔️.

Step 9d: Fastener Insertion (Type 4)

Illustrates fastener insertion, with a checkmark ✔️.

Step 10: Tool Adjustment/Setting

A sequence of actions is shown, involving adjustments or settings for the tool, indicated by numbered steps 1 through 6, and a "click!" ? confirmation.

Step 11: Final Operation Check

The diagram shows a final check of the tool's operation, possibly involving a fastener and a checkmark ✔️.

Step 12: Driving Fastener with Tool

The HILTI SDT 9 tool, powered by a compatible driver (ST 2000-22 / ST 1800), is shown driving a fastener into a surface. The process is broken down into steps 1, 2, 3, 4, 5, 6, with a "click!" ? confirmation.

Step 13: Tool Operation Sequence

A detailed sequence of operations is presented, involving multiple steps (1, 2, 3) and a "click!" ? confirmation, possibly for a specific function or maintenance task.