Technical-information-ASSET-DOC-17846654 Main applications for Steel/Metal screws
TECHNICAL MANUAL OF METAL CONSTRUCTION SCREWS
Decking & Roofing Siding Sandwich Ventilated Façade
08/2022
Table of contents
1. Main applications for Steel/Metal screws 1.1 Uninsulated roof with steel or aluminum sheet 1.2 Insulated roof with steel or aluminum sheet 1.3 Insulated flat roof 1.4 Sandwich panel roof 1.5 Eaves 1.6 Finishing at corners and edges 1.7 Uninsulated siding with steel or aluminum sheet 1.8 Sandwich panel siding 1.9 Insulated siding with steel or aluminum sheet, vertical 1.10 Insulated siding with steel or aluminum sheet, horizontal 1.11 Ventilated façade 1 layer 1.12 Ventilated façade 2 layer
2. Technical information about screws 2.1 Finding the right screw
2.1.1 Selection process 2.1.2Determining key screw dimensions
(length, drill capacity, thickness fastened range) 2.1.3 Hilti screw nomenclature 2.1.4 Colored screws
2.2 Steel/Metal screw technologies
2.2.1 2.2.2 2.2.3
Screw technologies (Speedy, Perfect Sealing, Racing Tip) Steel Metal Tapper ST 1800-A22 Stand-up decking tool SDT 9
2.3 Corrosion protection
2.4 Codes and approvals
Main applications for Steel/Metal screws
1
3. Steel/Metal screw portfolio 2 3.1 Collated screws for decking applications with stand-up decking tool SDT 9
2 3.1.1 Collated side-lap fastening screws
[S-MS 01S M9, S-MS 01Z M9, S-MD 01Z M9, S-MD 03Z M9,
3
S-MDU 21Z M9]
30
3.1.2 Collated self-drilling screws for metal sheet to frame fastening
3
[S-MD 03Z M9, S-MD 23Z M9, S-MD 25Z M9]
31
4 3.2 Siding applications
32
4 3.2.1 Tip #1 screws for light applications
33
3.2.1.1 HEX/ Pan head self-drilling screws, chip-less
5
[S-MS 01S, S-MS 41S, S-MS 51S, S-MS 01PS, S-MS 31PS, S-MS 01Z, S-MS 41Z, S-MS 51Z]
33
3.2.1.2 HEX head self-drilling screws
5
[S-MD 01S, S-MD 51S, S-MD 61S, S-MD 01Z, S-MD 51Z]
35
3.2.1.3 HEX head carbon steel self-drilling screws with pressed-on flange
6
[S-MD 21Z, S-MDU 21Z]
37
3.2.1.4 HEX/ Pan head self-drilling screws with extended drill capacity
6
[S-MD 01LPS, S-MD 01LS, S-MD 01LSS, S-MD 31LPS,
S-MD 31LPSS, S-MD 41LS, S-MD 51LS, S-MD 61LS,
7
S-MD 71LS, S-MD 51LZ, S-MD 51LSS]
38
7 3.2.2 Tip #3 screws for light and medium applications
40
3.2.2.1 HEX head self-drilling screws without sealing washer
[S-MD 03Z, S-MD 23Z, S-MD 03C, S-MD 03S, S-MD 03SS]
40
3.2.2.2 HEX head self-drilling screws with sealing washer
[S-MD 53Z, S-MD 43S, S-MD 53S, S-MD 63S, S-MD 73S,
S-MD 53SS]
42
9 3.2.2.3 Pan head self-drilling screws with and without sealing washer
[S-MD 03PZ, S-MD 03PS, S-MD 33PS, S-MD 03PSS,
9
S-MD 33PSS]
44
12 3.2.3 Tip #5 screws for medium to heavy applications
46
14 3.2.3.1 HEX head self-drilling screws without sealing washer
15
[S-MD 05Z, S-MD 25Z, S-MD 05S, S-MD 05SS]
46
3.2.3.2 HEX head self-drilling screws with sealing washer
[S-MD 55Z, S-MD 65Z, S-MD 55S, S-MD 65S, S-MD 75S,
16
S-MD 55SS]
48
3.2.3.3 Pan head self-drilling screws with and without sealing washer
16
[S-MD 05PS, S-MD 35PS, S-MD 35PSS]
50
18
19 3.2.4 Screws for wood/metal and metal/wood applications
51
3.2.4.1 HEX head self-drilling screws without sealing washer
20
[S-MDW 01Z, S-MDW 01C, S-MDW 01S]
51
3.2.4.2 HEX head self-drilling screws with sealing washer
25
[S-MDW 51Z, S-MDW 61Z, S-MDW 71Z, S-MDW 51C,
S-MDW 61C S-MDW 71C, S-MDW 51S, S-MDW 61S, S-MDW 71S]
52
3.2.4.3 Countersunk head self-drilling wing tip screws
[S-WD 11Z, S-WD 11C, S-WD 13C, S-WD 15C]
54
3.2.5 Wafer head carbon steel self-drilling screws without sealing washer
[S-MD 01ZW, S-MD 03ZW, S-MD 05ZW]
55
3.3 Screws for light ventilated façade applications
56
3.3.1 Stainless steel self-drilling screws for fastening Aluminum brackets
and profiles
[S-AD 01S, S-AD 01SS, S-AD 01LSS, S-AD 01LHSS, S-AD 01LPSS]
56
3.3.2 Stainless steel self-drilling screws for fastening cladding panels
[S-PS 01S, S-PD 01S]
57
3.3.3 Stainless steel screws for hidden fastenings of HPL panels
[S-HP 02SS, S-FP 01SS]
58
www.hilti.group
III
Main applications for Steel/Metal screws
1
3.4 Screws for sandwich applications
3.4.1 3.4.2 3.4.3 3.4.4 3.4.5 3.4.6 3.4.7
HEX head stainless steel self-drilling screws for light and medium steel substructure [S-CD 53S, S-CD 63S, S-CD 73S]
HEX head carbon steel self-drilling screws for light and medium steel substructure [S-CD 53C, S-CD 63C]
HEX head stainless steel self-drilling screws for thick steel substructure with twisted drill tip [S-CD 55GS, S-CD 65GS, S-CD 75GS]
HEX head stainless steel self-drilling screws for thick steel substructure [S-CD 55S, S-CD 65S, S-CD 75S]
HEX head carbon steel self-drilling screws for thick steel substructure [S-CD 55C, S-CD 65C]
HEX head stainless steel self-drilling screws for wood base materials [S-CDW 51S, S-CDW 61S, S-CDW 71S]
HEX head carbon steel self-drilling screws for wood base materials [S-CDW 61C]
3.5S tructural self-tapping screws
3.5.1 3.5.2 3.5.3 3.5.4 3.5.5
Stainless steel self-tapping screws for thick base materials [S-MP 52S, S-MP 62S, S-MP 72S]
Stainless steel self-tapping screws for thick base materials [S-MP 54S, S-MP 64S, S-MP 74S]
Galvanized self-tapping screws for thick base materials [S-MP 52Z]
Stainless steel self-tapping screws for thin materials and wood [S-MP 53S, S-MP 63S, S-MP 73S]
Galvanized self-tapping screws for thin materials and wood [S-MP 53Z]
3.6 Non-structural Steel/Metal screws for HVAC applications
59 4Accessories and related products
4.1 Direct fastening accessories
81
59 4.1.1 Siding and decking nail X-ENP for fastening metal sheets to
thick steel substructures
81
4.1.2 Sealing cap for ENP
82
61 4.1.3 Sheet metal nail X-ENP2K for fastening sheet metal and thin purlins
83
4.2 Powder-actuated fastening tool with charger
84
63 4.3 Steel/Metal accessories, nut setter, SDT 9, bits, HPF System, ST tools 86
4.4 Saddle washer and sealing washer
90
65
67
68 70 71
71 73 75 76 78 79
IV
www.hilti.group
Main applications for Steel/Metal screws
Content
Page 1
1.1
Uninsulated roof with steel or aluminium sheet
2
1.2
Insulated roof with steel or aluminium sheet
2
1.3
Insulated flatroof
3
1.4
Sandwich roof
3
1.5
Eaves4
1.6
Finishing at corners and edges
4
1.7
Uninsulated siding with steel or aluminium sheet
5
1.8
Sandwich panel siding
5
1.9
Insulated siding with steel or aluminium sheet, vertical
6
1.10
Insulated siding with steel or aluminium sheet, horizontal
6
1.11
Light ventilated facade, 1 Layer
7
1.12
Light ventilated facade, 2 Layer
7
www.hilti.group
1
1.1Uninsulated roof with steel
1
or aluminium sheet
Main applications for Steel/Metal screws
1.2Insulated roof with steel or aluminium sheet
7
5
1
6
2
4
3
2
4 2
4 1
1 1 5 2
2
1
3
1
3
2
2
2
1
1
1
2
2
6
4
6
4 5
1
8
4
4
7
4
3
1
5
2 2
2 2
2
2
2
1
2
1
2
1
1
Self-drilling screws 1 S-MS 51Z S-MD 51Z S-MS 51S S-MD 51S S-MD 61S S-MDW 51S S-MDW 61S S-MDW 71S 2 S-MD 51LZ S-MD 53Z S-MD 51LS 3 S-MD 53Z S-MD 53S S-MD 63S S-MD 73S 4 S-CD 53C S-CD 63C S-CD 53S S-CD 63S S-CD 73S Saddle washer 5 S-MD 55Z S-MD 65Z S-MD 55S S-MD 65S S-MD 75S 6 S-CD 55C S-CD 65C S-CD 55GS
p. 33 p. 35 p. 33 p. 35 p. 35 p. 52 p. 52 p. 52 p. 38 p. 42 p. 38 p. 42 p. 42 p. 42 p. 42 p. 61 p. 61 p. 59 p. 59 p. 59 p. 91 p. 48 p. 48 p. 48 p. 48 p. 48 p. 67 p. 67 p. 63
S-CD 65GS S-CD 75GS Saddle washer 7 S-CDW 61C S-CDW 51S S-CDW 61S S-CDW 71S Saddle washer
p. 63 p. 63 p. 91 p. 70 p. 68 p. 68 p. 68 p. 91
Self-tapping screws 1 S-MP 53Z S-MP 53S S-MP 63S S-MP 73S Saddle washer 2 S-MP 52Z S-MP 52S S-MP 62S S-MP 54S S-MP 64S S-MP 72S S-MP 74S Saddle washer
p. 78 p. 76 p. 77 p. 77 p. 91 p. 75 p. 71 p. 71 p. 73 p. 73 p. 71 p. 73 p. 91
DX-application 1 X-ENP2K SDK2/PDK2 2 X-ENP SDK2/PDK2
p. 83 p. 82 p. 81 p. 82
Self-drilling screws 1 S-MS 01Z S-MD 01Z S-MD 01LPS S-MDU 21Z S-MD/MS M9 2 S-MD 21Z S-MD 23Z 3 S-MD 25Z S-MD 05Z 4 S-MD 51LZ S-MD 53Z S-MD 51LS S-MD 61LS S-MD 71LS 5 S-MS 51Z S-MD 51Z S-MS 51S S-MD 51S S-MD 61S 6 S-CD 53C S-CD 63C S-CD 53S S-CD 63S S-CD 73S Saddle washer
p. 33 p. 35 p. 38 p. 37 p. 30 p. 37 p. 41 p. 31 p. 46 p. 38 p. 42 p. 39 p. 39 p. 39 p. 33 p. 35 p. 34 p. 35 p. 35 p. 61 p. 61 p. 60 p. 60 p. 60 p. 91
7 S-MD 01S S-MD 51S S-MDW
8 S-CD 73S
p. 35 p. 35 p. 51 p. 60
Self-tapping screws 1 S-MP 53Z S-MP 53S 2 S-MP 52Z S-MP 52S S-MP 54S S-MP 53Z 4 S-MP 52S S-MP 62S S-MP 72S S-MP 54S S-MP 64S S-MP 74S Saddle washer
p. 78 p. 77 p. 75 p. 71 p. 73 p. 78 p. 71 p. 71 p. 71 p. 73 p. 73 p. 73 p. 91
DX-application 1 X-ENP2K 2 X-ENP
p. 83 p. 81
Z = GalvanizedS(S) = Stainless steelC = Duplex Coated = Self-drilling screws = Self-tapping screws = DX-application (Nails)
2
www.hilti.group
1.3 Insulated flatroof
Main applications for Steel/Metal screws
1.4 Sandwich panel roof
1
4
3
1
2
2
2
2
2
2
1
2
1
1
2 3
2 3 2 2
4 2
3 3
1
4
1
2
3
3
2
3 2
2
3
2
Self-drilling screws 1 S-MS 01Z
S-MD 01Z S-MDU 21Z S-MD/MS M9 2 S-MD 21Z S-MD 23Z 3 S-MD 25Z S-MD 05Z 4 S-MD 01S S-MD 01LPS S-MD 51S S-MDW
p. 33 p. 35 p. 37 p. 30 p. 37 p. 41 p. 31 p. 46 p. 35 p. 38 p. 35 p. 51
DX-application 1 X-ENP2K 2 X-ENP
Self-tapping screws 1 S-MP 53Z
S-MP 53S 2 S-MP 52Z
S-MP 52S S-MP 54S
p. 78 p. 77 p. 75 p. 71 p. 73
p. 83 p. 81
Self-drilling screws 1 S-MS 51Z
S-MD 51Z S-MS 51S S-MD 51S S-MD 61S 2 S-CD 53C S-CD 63C S-CD 53S S-CD 63S S-CD 73S Saddle washer 3 S-CD 55C S-CD 65C S-CD 55GS S-CD 65GS S-CD 75GS Saddle washer 4 S-CDW 61C S-CDW 51S S-CDW 61S S-CDW 71S Saddle washer
p. 33 p. 35 p. 33 p. 35 p. 35 p. 61 p. 61 p. 59 p. 59 p. 59 p. 91 p. 67 p. 67 p. 63 p. 63 p. 63 p. 91 p. 70 p. 69 p. 69 p. 69 p. 91
Self-tapping screws 1 S-MP 53Z
S-MP 53S 2 S-MP 53Z
S-MP 53S S-MP 63S S-MP 73S Saddle washer 3 S-MP 52Z S-MP 52S S-MP 62S S-MP 54S S-MP 64S S-MP 72S S-MP 74S Saddle washer
p. 78 p. 77 p. 78 p. 77 p. 77 p. 77 p. 91 p. 75 p. 71 p. 71 p. 73 p. 73 p. 71 p. 73 p. 91
Z = GalvanizedS(S) = Stainless steelC = Duplex Coated = Self-drilling screws = Self-tapping screws = DX-application (Nails)
www.hilti.group
3
1.5 Eaves
1
1 1
2 3 1
Main applications for Steel/Metal screws
1.6Finishing at corners and edges
1 3 1
1 1
Self-drilling screws 1 S-MS 41Z
S-MS 51Z S-MD 51Z S-MS 41S S-MS 51S S-MD 51S 2 S-MD 51LZ S-MD 53Z S-MD 51LS 3 S-MD 53Z S-MD 43S S-MD 53S
p. 33 p. 33 p. 35 p. 33 p. 34 p. 35 p. 38 p. 42 p. 38 p. 42 p. 42 p. 42
Self-tapping screws 1 S-MP 53Z
S-MP 53S
p. 78 p. 77
Self-drilling screws 1 S-MS 41Z
S-MS 51Z S-MD 51Z S-MS 41S S-MS 51S S-MD 51S 3 S-MD 53Z S-MD 43S S-MD 53S
p. 33 p. 33 p. 35 p. 33 p. 33 p. 35 p. 42 p. 42 p. 42
Self-tapping screws 1 S-MP 53Z
S-MP 53S
p. 78 p. 77
Z = GalvanizedS(S) = Stainless steelC = Duplex Coated = Self-drilling screws = Self-tapping screws = DX-application (Nails)
4
www.hilti.group
1.7Uninsulated siding with steel or aluminium sheet
Main applications for Steel/Metal screws
1.8 Sandwich panel siding
1
1 2
2 1
4 1
5 1 1
2
3
6 2
2
7 2 2
Self-drilling screws 1 S-MD 35PS 2 S-MS 31PS S-MD 43S 3 S-MS 31PS S-MS 41Z 4 S-MS 41Z S-MS 51Z S-MD 51Z S-MS 41S S-MS 51S 5 S-MD 51LZ S-MD 53Z S-MD 51LS 6 S-MD 53Z S-MD 53S S-MD 63S S-MD 73S 7 S-MD 55Z S-MD 65Z S-MD 55S
p. 50 p. 33 p. 42 p. 33 p. 33 p. 33 p. 33 p. 35 p. 33 p. 34 p. 38 p. 43 p. 38 p. 42 p. 42 p. 42 p. 42 p. 48 p. 48 p. 48
Self-tapping screws 1 S-MP 53Z S-MP 53S 2 S-MP 52Z S-MP 52S S-MP 54S
p. 78 p. 77 p. 75 p. 71 p. 73
DX-application 1 X-ENP2K SDK2/PDK2 2 X-ENP SDK2/PDK2
p. 83 p. 82 p. 81 p. 82
1 1
1 2
2 3
3 1
2 3
2
1 1 3
Self-drilling screws 1 S-CD 53C S-CD 63C S-CD 53S S-CD 63S 2 S-CD 55C S-CD 65C S-CD 55GS S-CD 65GS 3 S-CDW 61C S-CDW 51S S-CDW 61S
p. 61 p. 61 p. 59 p. 59 p. 67 p. 67 p. 63 p. 63 p. 70 p. 69 p. 69
Self-tapping screws 1 S-MP 53Z S-MP 53S S-MP 63S 2 S-MP 52Z S-MP 52S S-MP 62S 3 S-MP 52Z S-MP 54S S-MP 64S
p. 78 p. 77 p. 77 p. 75 p. 71 p. 71 p. 75 p. 73 p. 73
Z = GalvanizedS(S) = Stainless steelC = Duplex Coated = Self-drilling screws = Self-tapping screws = DX-application (Nails)
www.hilti.group
5
1.9Insulated siding with steel or
1
aluminium sheet, vertical
Main applications for Steel/Metal screws
1.10Insulated siding with steel or aluminium sheet, horizontal
2 1
8
7
6
1
1
1
3
1
4
2
1
5
2
2
Self-drilling screws 1 S-MS 41Z S-MS 31PS 2 S-MS 31PS S-MD 33PS S-MD 43S 3 S-MD 01LPS S-MS 31PS S-MD 01S S-MD 51S S-MDW 01S 4 S-MD 21Z S-MD 23Z 5 S-MD 25Z S-MD 05Z 6 S-MS 01Z S-MD 01Z S-MDU 21Z 7 S-MD 51LZ S-MD 53Z S-MD 51LS S-MD 53S
p. 33 p. 33 p. 33 p. 44 p. 42 p. 38 p. 33 p. 35 p. 35 p. 51 p. 37 p. 41 p. 31 p. 46 p. 33 p. 35 p. 37 p. 38 p. 42 p. 38 p. 42
8 S-MS 41Z S-MS 51Z S-MD 51Z S-MS 41S S-MS 51S S-MD 51S S-MD 51LS
p. 33 p. 33 p. 35 p. 33 p. 34 p. 35 p. 38
Self-tapping screws 1 S-MP 53Z S-MP 53S 2 S-MP 52Z S-MP 52S S-MP 54S
p. 78 p. 77 p. 75 p. 71 p. 73
DX-application 1 X-ENP2K 2 X-ENP
p. 83 p. 81
7
1 4
1
6 1 1
1 2 2 1
Self-drilling screws 1 S-MD 01LPS S-MS 31PS S-MD 01S S-MD 51S 2 S-MD 21Z S-MD 23Z 3 S-MD 25Z S-MD 05Z 4 S-MS 01Z S-MD 01Z S-MDU 21Z 5 S-MD 01Z S-MD 03Z S-MD 51Z S-MD 51LZ S-MD 53Z 6 S-MD 51LZ S-MD 53Z S-MD 51LS S-MD 53S 7 S-MS 41Z S-MS 51Z S-MD 51Z S-MS 41S S-MS 51S S-MD 51S S-MD 51LS
p. 38 p. 33 p. 35 p. 35 p. 37 p. 41 p. 31 p. 46 p. 33 p. 35 p. 37 p. 35 p. 31 p. 35 p. 38 p. 42 p. 38 p. 42 p. 38 p. 42 p. 33 p. 33 p. 35 p. 33 p. 34 p. 35 p. 38
3
2
5
2
1
8
8 S-MDW 51Z S-MDW 61Z S-MDW 71Z
p. 52 p. 52 p. 52
Self-tapping screws 1 S-MP 53Z S-MP 53S 2 S-MP 52Z S-MP 52S S-MP 54S
p. 78 p. 77 p. 75 p. 71 p. 73
DX-application 1 X-ENP2K 2 X-ENP
p. 83 p. 81
Z = GalvanizedS(S) = Stainless steelC = Duplex Coated = Self-drilling screws = Self-tapping screws = DX-application (Nails)
6
www.hilti.group
1.11Ventilated Facade 1 Layer
Main applications for Steel/Metal screws
1.12Ventilated Facade
2 Layer
1
1
2 3 6
1 4
5
5 1
3
4
6
1
7
2
Self-drilling screws 1 S-AD 01S S-AD 01SS S-AD 01LSS S-AD 01LPSS S-AD 01LHSS 2 S-MS 31PS 3 S-MD 33PS 4 S-MD 55S 5 S-MDW 51S S-MDW 61S S-MDW 71S 6 S-MD 01LPS
p. 56 p. 56 p. 56 p. 56 p. 56 p. 33 p. 44 p. 48 p. 52 p. 52 p. 52 p. 38
Self-tapping screws 1 S-MP 53S
p. 77
Self-drilling screws 1 S-AD 01S S-AD 01SS S-AD 01LSS S-AD 01LPSS S-AD 01LHSS 2 S-MDW 51S S-MDW 61S S-MDW 71S 3 S-MD 33PS 4 S-MD 55S 5 S-MD 51LS 6 S-HP 02SS 7 S-MD 01LPS
p. 56 p. 56 p. 56 p. 56 p. 56 p. 52 p. 52 p. 52 p. 44 p. 48 p. 38 p. 58 p. 38
Self-tapping screws 1 S-MP 53S
p. 77
Z = GalvanizedS(S) = Stainless steelC = Duplex Coated = Self-drilling screws = Self-tapping screws = DX-application (Nails)
www.hilti.group
7
Content
2.1 Finding tTheechringihctalsicnrfeowrmaStieolnecatbioonupt rsoccrewsss
Page
2 2.1
Finding the right screw
9
2.1.1 Selection process
9
2.1.2Determining key screw dimensions (length, drill capacity,
thickness fastened range)
12
2.1.3 Hilti screw nomenclature
14
2.1.4 Colored screws
15
2.2
Steel/Metal screw technologies
16
2.2.1 Screw technologies (Speedy, Perfect Sealing, Racing Tip)
16
2.2.2 Steel Metal Tapper ST 1800-A22
18
2.2.3 Stand-up decking tool SDT 9
19
2.3
Corrosion protection
20
2.4
Codes and approvals
25
8
www.hilti.group
2.1 Finding the right screw Selection process
2.1 Finding the right screw
2.1.1 Selection process
Selection of the right screw depends on a number of factors determined by the ap-
2
plication and the circumstances or conditions under which the screw is to be used.
If the application is known, the Hilti screw designation system provides quick and
reliable help with screw selection.
S -M D
6 3 S 5.5 x 40
To quickly find the most suitable product for the specific application on hand, simply ask yourself the following questions:
1. Which type of Hilti fastener do you wish to use?
S: Screw
2. Which material is to be fastened?
M: Metal C: Sandwich panel W: Wood I: Insulation A: Aluminium
Example: S always stand for Hilti screw fastening
S-
Example: F astening metal profile sheet
S-M
3. Do you wish to use a self-tapping, self-drilling or
pointed self-piercing (chipless) screw?
S: Pointed, self-stitching (Speedy function) D: Self-drilling DU: Self-drilling undercut DW: Self-drilling wood P: Pre-drilling (self-tapping) FP: Self-drilling Fixing Pin HP: Self-tapping for high pressure laminate Fixing Pin
Example: Self-drilling S-MD
4. Is a sealing washer or a pressed-on washer required?
0: No sealing washer 1: Countersunk head 2: Pressed-on flange 3: 12mm sealing washer 4: 14mm sealing washer 5: 16mm sealing washer 6: 19mm sealing washer 7: 22mm sealing washer
Example: 19mm sealing washer S-MD 6
www.hilti.group
9
5. How thick is the material to be drilled through by the screw?
S-MS self-stitching screw 1: Drilling capacity 2x0.4mm up to 2x1.25mm 2 Self-drilling screw 1: Drilling capacity 1.0 up to approx. 3.0mm 1L: Drilling capacity 1.0 up to approx. 4.0mm 3: Drilling capacity 2.1 up to approx. 6.0mm 5: Drilling capacity 4.6 up to approx. 15.0mm
Self-tapping screw 2: Blunt thread run-out >1.25mm steel substructure 3: Pointed thread run-out <3mm steel substructure
Timber substructure 4: Blunt, hardened thread run-out, suitable for S420GD/ST52
high strength steel >1.25mm steel substructure
6. Which type of corrosion protection and head geometry are required?
Head and thread geometry: P: Pan head W: Wafer head G: Coarse thread
Material: Z: Galvanized carbon steel C: Duplex coated carbon steel S: A2 grade stainless steel SS: A4 grade stainless steel
7. Diameter and screw length
Screw diameter: 4.2mm / 4.8mm / 5.5mm / 6.3mm / 6.5mm / 7.2mm
Screw length: 13mm 102mm S-MD screws 75mm 300mm S-CD screws 19mm 275mm S-MP screws
2.1 Finding the right screw Selection process
Example: Drilling capacity 5mm S-MD 63
Example: S tainless steel S-MD 63 S
Example: 5 .5mm diameter length 55mm
S-MD 63 S 5.5x40
10
www.hilti.group
Screw type
2.1 Finding the right screw Selection process
2
S-MD x1/3/5* S-MDW x1* S-CD x3/5* S-CDW x1* S-AD x1*
* x represents washer size
S-MS x1*
Screw head & recess
S-MP x2* S-MP x4*
S-MP x3*
Hexagon head
Hexagon head with pressed-on flange
Hexagon head with sealing washer
Hexagon head with sealing washer and supporting thread
Pan head
Pan head with sealing washer
Wafer head
Countersunk head
www.hilti.group
11
2.1 Finding the right screw Determining key screw dimensions
2.1.2 Determining key screw dimensions (length, drill capacity, thickness fastened range)
All values from this manual need to be verified with the actual jobsite situation and adapted if additional distances e.g. gaps occur on site. 2
Definition of the screw length (L)
+
The screw length is measured from the start of the screw (drill point) to below the
screw head. However, the screw length alone says nothing about the screw's6 :
clamping area.
PP
The screw length is selected depending on:
· the thickness of the base material,
· the thickness of the building component to be fastened,
· the thickness of possible intermediate layers such as thermal separation,
· additional building components such as calottes.
It must also be noted that when determining the screw length, the drill point, thread cut and (if necessary, in the case of bi-metal screws) the welding zone must be taken into account. The technical length of the screws may vary by ±1mm according to ISO 2768 tolerance class v. The width across flats (german Schlüsselweite, SW) is the distance between two parallel surfaces on the head of a screw, mostly for torque transmission.
Definition of the drilling performance (DC)
The length of the drill point must always be selected in such a way that the total material thickness (including the intermediate material) is completely drilled through before the thread starts to mold.
G
'& 0)
/
6:
Calculating the fastening height (MF)
The fastening height MF (clamping area) is understood to mean the total height,
Component I
consisting of:
+ the thickness of building component I + the thickness of possible intermediate layers, such as thermal separation
Component II MF
MF min. 22mm
+ the thickness of additional building components, such as calottes
+ the embedment depth in building component II (steel) Note: in wood embedment is not part of MF
Fastening height in sheet metal with and without an intermediate layer
Fastening height in wood
The embedment depth in building component II depends on the base material thickness and the base material itself. It is calculated as follows:
· Sheet metal or steel < 6mm · Steel 6mm
embedment depth = existing material thickness
S elf-tapping screws: embedment depth = 6mm
S elf-drilling screws: embedment depth = existing material thickness
· Wood
embedment depth 22mm
Fastening height in profile metal sheet on steel
12
www.hilti.group
2.1 Finding the right screw Determining key screw dimensions
Special features:
· Sandwich elements fastened with S-CD screws: The fastening height (MF) or clamping length is only specified with the maximum sandwich element thickness that is relevant to the fastening.
· Calottes: If using calottes, an additional 3mm must be taken into account when calculating the fastening height (MF).
The fastening height (MF) is not included in the screw approvals. For this, please refer to the Hilti technical manual for metal construction screws for use in roofs/walls.
2
Fastening height in sandwich panel
www.hilti.group
13
2.1 Finding the right screw Hilti screw nomenclature
2.1.3 Hilti Screw Nomenclature
The easy way to find the right screw
2
S -M D
5 3Z
5.5 x 25
M
Screw Fastening
Application M: Metal C: Composite/Sandwich W: Wood I: Insulation A: Aluminium
Function S: Speedy function D: Self-drilling DU:Self-drilling undercut DW:Self-drilling wood P: Pre-drilling FP: Self-drilling Fixing Pin HP:Self-tapping for
high pressure laminate
Dimensions Thread Diameter x Length
Further Information
M: Collated M9:Collated for the
SDT 9 RAL: Color Code
Head geometry P: Pan head W: Wafer head G: Coarse thread
Material Z: Galvanized carbon steel C: Duplex coated carbon steel S: A2 grade stainless steel SS: A4 grade stainless steel
Information about washers 0: No washer 1: Countersunk head 2: Pressed on flange 3: Washer 12mm 4: Washer 14mm 5: Washer 16mm 6: Washer 19mm 7: Washer 22mm
14
Information about the screw point
Self-piercing (S-MS) 1: Drilling capacity 2x0.4mm 2x1.25mm
Self-drilling screw (S-MD / S-CD) 1: Drilling capacity 1.0 up to approx. 3.0mm 1L: Drilling capacity 1.0 up to approx. 4.0mm 3: Drilling capacity 2.1 up to approx. 6.0mm 5: Drilling capacity 4.6 up to approx. 15.0mm
Self-tapping screw (S-MP) 2: >1.25mm steel base material 3: <3.00mm steel base material
and wood base material 4: >1.25mm steel base material,
in high strength
www.hilti.group
2.1.4 Colored screws
Screws with colored heads and washers
All screws can be supplied with powder-coated heads and washers.
Delivery period: Standard RAL: 1 to 2 weeks Other RAL: 3 to 4 weeks
The following RAL colors fall under the "Standard" category:
1015 3000 3005 3009 3011 5008
Light ivory Flame red Wine red Oxide red Brown red Grey blue
6011 6020 6021 7005 7012 7015
Reseda green Chrome green Pale green Mouse grey Basalt grey Slate grey
5009 5010 5014 5017 6003 6005 6006 6007
Azure blue Gentian blue Sky blue Traffic blue Olive green Moos green Gray olive Battle green
7016 7022 7024 7031 7032 7035 7038 7042
Anthracite grey Umbra grey Graphite grey Blue grey Pebble grey Light grey Agate grey Traffic grey A
2.1 Finding the right screw Colored screws
2
8004 Copper brown 8011 Nut brown 8012 Red brown 8014 Sepia brown 8016 Mahogany brown 8017 Chocolate brown 8019 Grey brown 9001 Cream 9002 Grey white 9005 Jet black 9006 White aluminium 9007 Gray aluminium 9010 Pure white 9011 Graphite black
www.hilti.group
15
2.2 Steel/Metal screw technologies
2.2.1Screw technologies (Speedy, Perfect Sealing, Racing Tip)
2 At Hilti, we believe that both productivity and safety features must go hand in hand to ensure high-quality fastening points on steel. In close collaboration with our building envelope & façade customers we have driven the following unique screw innovations over the past decades.
Hilti chip-less speedy S-MS screw with superior performance in overlap applications. Available in z inc-plated & A2 Bi-metal with pan head & hex head.
Unmatched speed with maximum reliability Compared to standard self-drilling screws with drill tips, speedy screws can be fastened much faster. The special "ballistic" shape of the screw tip prevents the screw from slipping and offers maximum reliability even if the surface is wet or the screw is driven at an angle.
Chip-less material displacement During the setting process, the metal around the screw is displaced instead of being drilled through. As no metal chips are formed, there is also no need for subsequent cleaning and the risk of discoloration due to corrosion of metal chips can be ruled out. Additionally, the chip-less formation has hygiene advantages, which are required in clean environments such as HVAC applications.
Improved load values Since the metal is displaced as the screw penetrates, the screw hole remains surrounded by a greater volume of metal. This results in a higher permissible loading capacity compared to conventional screw fastenings.
S-MS perfect sealing function for thin applications For speedy screws with EPDM washers, the integrated undercut below the screw head assures a perfect fit without over-/or under-pressed washers.
2.2 Steel/Metal screw technologies
16
www.hilti.group
The Hilti "RT"-drill point for fast, reliable screwdriving characteristics
Remedial work and the waste of screws through burned tips or screw breakage is both time-consuming and costly. Racing tip "RT" technology increases the setting speed and minimizes burned screw tips in medium to thick applications. All screws featuring the new technology carry the "RT" logo on the package.
Rapid removal of metal chips Through the wave-shaped drill tip, metal chips can be removed more quickly as the screw penetrates the base material and thus minimizes the risk of burned drill tips.
Reduced forming torque A special heat treatment, coating and ductility leads to better corrosion protection and reduces forming torque. This prevents the screw form torsional fracture during the setting process.
"PS" sealing through customized below-head geometry
EPDM washers ensure water-resistant fastening points on steel. If washers are either over-pressed or under-pressed, water leakage through the outer skin of the building is inevitable. The innovative and patented perfect sealing "PS" feature incorporated in Hilti self-drilling screws with a drilling capacity of more than 3mm provides a simple solution to the problem of over-compression. Hilti screws with this new feature can be identified by the "PS" logo on the package. The shank below the screw head changes the setting from a soft to a hard screw joint. This function prevents the user from over-pressing the EPDM washer by putting too high torque on the screw joint.
2.2 Steel/Metal screw technologies
2
www.hilti.group
17
2.2.2 Steel Metal Tapper ST 1800-A22
The Hilti ST 1800-A22 cordless metal construction screwdriver makes the most difficult jobs, even on thick steel beams, look easy. With Hilti's comprehensive 2 range of screws and matching accessories it forms an unrivalled cordless system.
Ideal for fastening metal sheets or aluminum structures to steel or timber supports, the red dot design award-winning ST 1800-A22 brings mobile power to decking and siding work.
Tailored RPM and torque Screws can easily break when the friction in the drilling process is too high. The ST 1800-A22 aligns torque and RPM in a manner which ensures full load capacity of the screw and minimizes risk of screw breakage or burned drill-tips.
Defined fastening quality for hard screw joints The built-in mechanical torque clutch disconnects the power supply when the screw process is done to prevent unnecessary torsion and over-compression.
Perfectly pressed washers for soft screw joints The depth gauge ensures perfectly pressed washers that are neither over-pressed nor too loose.
ST 1800-A22 offers in-line grip The inline grip of the ST 1800-A22 increases the force transmission from the forearm to the screwdriver and leads to less fatigue in repetitive applications.
Sandwich screw guide ST-SG Thanks to the Hilti ST-SG screw guide, sandwich panel screws can be driven more efficiently and reliably than ever before. Developed specially for this application and single hand use, the ST-SG screw guide enables driving of long sandwich panel screws with ease, accuracy and without scratching or denting the sensitive panel surface.
2.2 Steel/Metal screw technologies
18
www.hilti.group
2.2.3 Stand-up decking tool SDT 9
The SDT 9 Stand-up decking tool delivers utmost productivity in repetitive steel decking applications. The decking tool works with collated screws and the steel-metal tappers ST 1800 / ST 1800-A22.
Highest productivity With the new rigid collation strip for fast feeding without bending and the slim nose piece, the SDT 9 can do the job up to three times faster than traditional methods, such as fastening metal decking with single screws.
Versatility The SDT 9, with two nose-pieces (red for red strips, black for black strips), offers a complete screw portfolio for side-lap fastenings of trapezoidal sheets and fastening of trapezoidal metal sheets to steel substructures with up to 15mm drilling capacity.
Safer and healthier working conditions The ergonomically designed SDT 9 stand-up tool for use with collated screws lets the operator work in an upright and thus low fatigue standing position. The upright working position in combination with the angled and height adjustable handles does not impair the operators health, even when working for longer periods.
Modularity Additionally, the stand-up tool is built in a modular way, so it can be disassembled into its individual components and single parts can be exchanged when worn out.
Usage of ST 1800-A22 / ST 1800 The permanent mode and torque clutch of the ST 1800-A22 / ST 1800 offer both productivity and high-quality fastening points in this repetitive application.
2.2 Steel/Metal screw technologies
2
www.hilti.group
19
2.3 Corrosion protection
2.3 Corrosion protection
With a view to supplying reliable and durable products, Hilti is constantly active in the development of methods of corrosion protection suitable for use with screws and fastening systems. 2
Ambient conditions, categories of corrosion
Corrosion occurs under a variety of conditions. It may be caused or increased by the following · microclimatic conditions · the installation process · contact with various materials
In order to select the most suitable type of corrosion protection for screws, the ambient conditions and the situation in which screws are to be used as well as the materials to be fastened must be taken into account.
While it is usually easy to differentiate between dry interiors (C1) and extreme conditions (C5), it is often difficult to differentiate between C2, C3 and C4. For this reason, the screw selection aid provided on page 23 is based on examples. These examples also take contact with the material to be fastened into account.
In accordance with DIN EN ISO 9223, the ambient conditions can be divided into six categories:
Corrosivity category C C1 C2 C3
C4
C5
CX
Corrosion level Very low Low Medium
High
Very high
Extreme
Typical environments
Indoor
Outdoor
Heated spaces with low relative humidity and insignificant pollution, e.g. offices, schools, museums.
Dry or cold zone, atmospheric environment with very low pollution and time of wetness, e.g. certain deserts, Central Arctic / Antarctica.
Unheated spaces with varying temperature and humidity. Low frequency of condensation and low pollution, e.g. storage, sports halls.
Temperate zone, atmospheric environment with low pollution (SO2 < 5µg/m3), e.g. rural areas, small towns. Dry or cold zone, atmospheric environment with short time of wetness, e.g. deserts, subarctic area.
Spaces with moderate frequency of condensation and moderate pollution from production processes, e.g. foodprocessing plants, laundries, breweries, dairies.
Temperate zone, atmospheric environment with medium pollution (SO2: 5µg/m3 to 30µg/m3) or some effect of chlorides, e.g. urban areas, coastal areas with low deposition of chlorides. Subtropical and tropical zone, atmosphere with low pollution.
Spaces with high frequency of condensation and high pollution from production processes, e.g. industrial processing plants, swimming pools.
Temperate zone, atmospheric environment with high pollution (SO2: 30µg/m3 to 90µg/m3) or substantial effect of chlorides, e.g. polluted urban areas, industrial areas, coastal areas without salt water spray, or exposure to strong effect of de-icing salts. Subtropical and tropical zone, atmosphere with medium pollution.
Spaces with very high frequency of condensation and/or with high pollution from production processes, e.g. mines, caverns for industrial purposes, unventilated sheds in subtropical and tropical zones.
Temperate and subtropical zone, atmospheric environment with very high pollution (SO2: 90µg/m3 to 250µg/m3) and/or significant effect of chlorides, e.g. industrial areas, coastal areas, sheltered positions on coastline.
Spaces with almost permanent condensation or extensive periods of exposure to extreme humidity effects and/ or with high pollution from production processes, e.g. unventilated sheds in humid tropical zones with penetration of outdoor pollution including airborne chlorides and corrosion-stimulating particulate matter.
Subtropical and tropical zone (very high time of wetness), atmospheric environment with very high SO2 pollution (higher than 250µg/m3) including accompanying and production factors and/or strong effect of chlorides, e.g. extreme industrial areas, coastal and offshore areas, occasional contact with salt spray.
20
www.hilti.group
2.3 Corrosion protection
Standards, approvals
When choosing the right material or corrosion protection for a fastener, the conditions under which it will be used,
the applicable loads and the expected duration of use must be taken into account.
It is essential that the requirements laid out in the applicable regulations or codes, standards and approvals for the
corresp onding countries (e.g. ETA, DTU, etc.) are observed.
2
Below, as an example, is an extract from the ETA-10/0182 approval for the S-MD, S-MP and S-MS:
"The provisions made in this European technical approval are based on an assumed working life of the fastening screws of 25 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works."
Duration of use and warranty
· Service life (or effective useful life) provides an indication of the duration for which the fastener can be expected to provide an intact connection between the components without impairment of its loadbearing characteristics or reduction of its loadbearing capacity. It is possible that signs of corrosion such as white rust or red rust may occur during the service life of the fastening but these only affect its appearance.
· Warranty period is a legal term that regulates the subject of liability for defective products. · The service life possible without functional impairment and without increased risk of failure is usually significantly longer than
the duration of the warranty period. Both, however, depend on whether the recommendations concerning the choice of material in relation to the conditions of use, including the surrounding atmosphere, have been observed.
www.hilti.group
21
2.3 Corrosion protection
Test procedures and evaluation of corrosion protection systems
Hilti operates a corrosion laboratory and field test locations where items are subjected to weathering under various climatic conditions. Regular laboratory tests ensure the consistently high quality of well-proven corrosion protection solutions. Descriptions of products often contain references to the laboratory tests carried out. The most important of these are described 2 below.
The salt spray test
A standardized test for the evaluation of the corrosion protection offered by various coatings. The procedure followed by the
tests is laid down in the ASTM B117 and DIN EN ISO 9227 standards. The items to be evaluated are placed in a test chamber
in which they are sprayed constantly with a salt solution (usually sodium chloride). The duration of the test depends on the type
and thickness of the coating on the item and the coating's corrosion resistance, and may vary between 6 hours and more than
1'000 hours. Coatings with a high corrosion resistance require a longer test duration.
Hilti screws have the following life expectancies results (in hours) in the salt spray test:
Z Zinc plated (galvanized carbon steel) 48 hours
C Duplex coated carbon steel
1'000 hours
S A2 grade stainless steel
1'440 hours
Kesternich test and alternating humidity test
"Kesternich test" is the name given to a corrosion resistance test in which specimens are exposed to sulfur dioxide in an
atmosphere of condensing humidity. This test was developed in order to simulate the damaging effect of acid rain and can be
used for coatings as well as base materials. The test method is laid down in various standards (DIN EN ISO 6988, DIN 50018).
The test specimens are placed in a test chamber where they are exposed to warm, humid air in conjunction with a defined
quantity of sulfur dioxide. The test is conducted in 24-hour cycles.
The alternating humidity test (ISO 6270) is carried out in a similar manner but without the addition of sulfur dioxide.
Hilti screws have the following Kesternich cycles:
C Duplex coated carbon steel
15 cycles
S A2 grade stainless steel
20 cycles
Corrosion protection systems used by Hilti for screws
Hilti currently offers three different corrosion protection solutions which are adapted according to how the products are to be used and the applicable ambient conditions:
Galvanic zinc plated (electrogalvanized) carbon steel The thickness of the zinc layer is between 4 and 15 m, depending on the type of screw. The steel is protected from corrosion by sacrificial corrosion of the zinc, which is a base metal (i.e. not a noble metal). The zinc layer dissolves during the course of this protective procedure. The period of time until the steel begins to rust is thus defined by the rate at which the zinc corrodes.
Duplex-coated carbon steel A duplex coating system is a corrosion protection system consisting of galvanizing (see above) in combination with other coatings. The galvanizing and the additional coating work together as a protective system. The coating protects the zinc layer from the effects of the atmosphere and chemical influences, thereby reducing the rate of corrosion. This increases the life of the screw, making its use possible in corrosive atmospheres.
A2 and A4 stainless steel International (Eurocode 3, EN 1993-1-4) and national standards and guidelines (such as the German technical approval DIBt Z.30.3-6) usually work with a special scoring system when evaluating the suitability of certain stainless steel grades. The system takes the risks presented by the main influencing factors into account, from which a corrosion resistance factor (CRF) is calculated. Each risk factor (chlorides, sulfur dioxide, washing effect) is linked to a certain number of points, which leads to the corrosion resistance class. The higher this key figure, the more durable is the product. A2 stainless steel is an austenitic, acid-resistant Cr-Ni steel with a low carbon content. Its high chromium content leads to formation of an oxide layer which provides a high level of corrosion protection. In situations where the oxide layer is destroyed it usually reforms if oxygen and moisture are present. The properties of A4 steel are very similar to those of A2 steel. But, A4 has a higher resistance classification which makes it much more durable than A2 stainless steel.
22
www.hilti.group
2.3 Corrosion protection
Selecting the right corrosion protection for anchors, powder-actuated fasteners and screws
If a fastening is to be perfectly satisfactory and reliable for its entire service life, all surrounding conditions
must be ascertained before a suitable fastener can be selected.
The following table provides a general guideline for commonly accepted applications for fastening
2
elements with various corrosion protection in typical atmospheric environments and depending on the
fastened material (see notes).
Screws Coating/material
S-MS Z S-MD Z S-MP Z S-MDW Z
S-CD C S-MDW C
C-Steel galvanic zinc plated
C-Steel duplex coated
S-AD S S-MS S S-MD S S-MP S S-CD S S-MDW S
Stainless steel A2
S-AD SS S-MD SS S-HP SS S-FP SS
Stainless steel A4
Environmental conditions
Fastened part
Dry indoor
Steel (zinc-coated, painted), aluminium,
stainless steel
Indoor with temporary condensation
Steel (zinc-coated, painted), aluminium Stainless steel
Steel (zinc-coated, painted), aluminium
Outdoor with low pollution
Stainless steel
Outdoor with moderate concentration of pollutants
Steel (zinc-coated, painted), aluminium Stainless steel
Coastal areas
Steel (zinc-coated, painted), aluminium, stainless steel
Outdoor, areas with heavy industrial pollution
Steel (zinc-coated, painted), aluminium, stainless steel
Close proximity to roads
Steel (zinc-coated, painted), aluminium, stainless steel
Special applications
Steel (zinc-coated, painted), aluminium, stainless steel
= expected lifetime of fasteners made from this material is typically satisfactory in the specified environment based on the typically expected lifetime of a building. The assumed service life in ETA approvals for screw fasteners is 25 years.
= a decrease in the expected lifetime of non-stainless fasteners in these atmospheres must be taken into account ( 25 years). Higher expected lifetime needs a specific assessment.
= fasteners made from this material are not suitable in the specified environment. Exceptions need a specific assessment.
www.hilti.group
23
Environment categories
Applications can be classified into various environmental categories, by taking the following main factors into account:
2 Indoor applications
Dry indoor environments (heated or air-conditioned areas) without condensation, e.g. office buildings, schools
Indoor environments with temporary condensation (unheated areas without pollutants), e.g. storage sheds
Outdoor applications
Outdoor, rural or urban environment with low pollution Large distance (> 10 km) from the sea
Outdoor, rural or urban environment with moderate concentration of pollutants and/or salt from sea water Distance from the sea 1-10 km
Coastal areas Distance from the sea < 1 km
Outdoor, areas with heavy industrial pollution Close to plants < 1km (e.g. petrochemical, coal industry)
Close proximity to roadways treated with de-icing salts Distance from roadways < 10 m
Special applications
Special applications Areas with special corrosive conditions, e.g. road tunnels with de-icing salt, indoor swimming pools, special applications in the chemical industry (exceptions possible)
2.3 Corrosion protection
Important notes:
The ultimate decision on the required corrosion protection must be made by the customer. Hilti accepts no responsibility regarding the suitability of a product for a specific application, even if informed of the application conditions. The tables are based on an average service life for typical applications. For metallic coatings, e.g. zinc layer systems, the end of lifetime is the point at which red rust is visible over a large fraction of the product and widespread structural deterioration can occur the initial onset of rust may occur sooner. National or international codes, standards or regulations, customer and/or industry specific guidelines must be independently considered and evaluated. These guidelines apply to atmospheric corrosion only. Special types of corrosion, such as crevice corrosion or hydrogen assisted cracking must be independently evaluated.
24
www.hilti.group
2.4 Codes and approvals
2.4 Approvals and assessments for Steel-Metal screws
Metal building structures are subject to the building code. So, proof of stability, including proof of fasteners, must be provided.
All construction products for which no European standards are available may only be used if a certificate of usability is availa- 2 ble. Such proof can be provided in the form of a European Technical Assessment (ETA). It is based on tests and a p ositive technical assessment of usability of the construction product for the intended use.
At national level, e.g. in Germany, the construction product may be regulated based on a national technical approval (abZ). The marking of construction products with the CE mark or the Ü mark certifies the existence of a usability certificate (e.g. ETA or abZ) and thus the suitability of the product for the intended use. The abZ and ETA for screws contain all the necessary information for dimensioning and installation. The European Technical Assessments (ETA) and the national technical approvals (abZ) for Hilti fastening screws are listed below.
ETA assessments for siding and decking applications
ETA-18/0880 Bi-metal screws Product family: Fastening screws for metal members and sheeting Trade name: Hilti S-MD, Hilti S-MDW, Hilti S-MP, Hilti S-MS
ETA-10/0182 Carbon steel screws Product family: Fastening screws for metal members and sheeting Trade name: Hilti S-MD, Hilti S-MS
ETA-20/0858 Carbon steel screws Product family: Fastening screws for metal members and sheeting Trade name: Hilti S-MDWC
ETA-17/0346 Carbon steel screws and stainless screws Product family: Fastening flexible roof waterproofing membranes Trade name: Hilti S-IT, S-ID, S-IW
ETA-13/0179 Carbon steel screws and Bi-metal screws Product family: Fastening screws for sandwich panel applications Trade name: Hilti S-CD, S-MP, S-CDW
Approvals and assessments for ventilated Façade applications
National technical approval abZ Z-14.4-769 S-MD, S-AD, S-MP
ETA-21/0567 Stainless steel screw Product family: Fastening elements for the rear fastening of Façade panels made
of decorative high-pressure laminates Trade name: Hilti S-HP02SS 7.2x9
www.hilti.group
25
2.4 Codes and approvals
FAQs (frequently asked questions) about the approvals
Interpreting the load value tables the connector's characteristic shear load-carrying capacity and transverse tensile strength VR,k and NR,k
2 Failure of
base material (Building
component II)
Excerpt
NR,k [kN] für tN,I [mm]
VR,k [kN] für tN,I [mm]
tN,II [mm]
Mt,nom
0,50 0,55 0,63 0,75 0,88 1,00 1,13 1,25 1,50 1,75 2,00 0,50 0,55 0,63 0,75 0,88 1,00 1,13 1,25 1,50 1,75 2,00
1,50
--
---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
2,00
---- ---- 2,60 ac 3,70 ac 4,50 -- 4,50 -- 4,90 -- 5,30 -- 6,20 -- 6,20 -- 7,80 -- ---- ---- 1,70 ac 2,20 ac 2,90 -- 3,09 -- 3,09 -- 3,09 -- 3,09 -- 3,09 -- 3,09 --
3,00
4,00
5,00
t 3,00 mm: 7 Nm t > 3,00 mm: 8 Nm
------------
------------
2,60 ac 2,60 ac 2,60 ac
3,70 ac 3,70 ac 3,70 ac
4,50 -- 5,00 ac 5,00 ac
4,50 -- 6,50 ac 6,50 a
4,90 -- 7,00 -- 7,90 --
5,30 -- 7,40 -- 9,30 --
6,20 -- 8,30 -- 9,50 --
6,20 -- 8,30 -- 9,50 --
7,80 -- 9,40 -- 9,50 --
------------
------------
1,70 ac 1,70 ac 1,70 ac
2,20 ac 2,20 ac 2,20 ac
2,90 -- 2,90 ac 2,90 ac
3,50 -- 3,50 ac 3,50 a
4,30 -- 4,30 -- 4,30 --
4,35 -- 5,10 -- 5,10 --
4,35 -- 5,61 -- 6,90 --
4,35 -- 5,61 -- 6,90 --
4,35 -- 5,61 -- 6,90 --
6,00
---- ---- 2,60 ac 3,70 ac 5,00 ac 6,50 a ---- ---- ---- ---- ---- ---- ---- 1,70 ac 2,20 ac 2,90 ac 3,50 a ---- ---- ---- ---- ----
Failure of profile metal sheet (Building component I)
Sheet metal covering
Note: It isn't possible to clearly conclude the failure mode of the screw from only the load values in the tables of the annex in the approval. Especially in the case of shear loads, the failure of the screw connection can occur in different modes. The load value in the load table corresponds to the minimum value of the different possible failure modes and is therefore the decisive load value.
Wooden sub-constructions Two pieces of evidence must be provided for screws that are also suitable for fastening profile metal sheets to wooden base materials. 1. The load-carrying capacity in wood must be calculated with the determined My,Rk and fax,k values in accordance
with EN 1995-1-1. 2. The load-carrying capacity in wood calculated in accordance with EN 1995-1-1 must then be compared with the sheet
metal load-carrying capacities VI,R,k and NI,R,k. The lower value must then be used as the connector's load-carrying capacity.
The procedure and further details are also described in section 4.2.2 of the ETA (European Technical Approval).
Appendix sheets for different steel grades For some screw types, load values were calculated separately for two sheet metal steel grades. In these instances, the appendix sheets with the data for the higher-strength sheet metals were marked with the corresponding sheet metal tensile strength, e.g. 390 for sheet metals of S320GD grade or better.
Load information if the base material building component thickness tII 6mm In the case of screws that are screwed at least 6mm into the steel sub-construction, it can be assumed that the screw breakage failure mode is decisive for the failure of the connector. The load values at tII = 6mm therefore also represent all base material thicknesses greater than 6mm; also see section 4.3 of the corresponding ETA.
26
www.hilti.group
2.1 Finding the right screw Selection process
2
www.hilti.group
27
Content
Selection of the right screw Sbtaeseicl/sM&eHtailtsi cnroemwepnocrlatftoulrioe
Page
3
Steel/Metal screw portfolio
28
3 3.1
Collated screws for decking applications with stand-up decking tool SDT 9
30
3.1.1 Collated side-lap fastening screws
[S-MS 01S M9, S-MS 01Z M9, S-MD 01Z M9, S-MD 03Z M9, S-MDU 21Z M9]
30
3.1.2 Collated self-drilling screws for metal sheet to frame fastening
[S-MD 03Z M9, S-MD 23Z M9, S-MD 25Z M9]
31
3.2
Siding applications
33
3.2.1 Tip #1 screws for light applications
33
3.2.1.1 HEX/Pan head self-drilling screws, chip-less
[S-MS 01S, S-MS 41S, S-MS 51S, S-MS 01PS, S-MS 31PS, S-MS 01Z,
S-MS 41Z, S-MS 51Z]
33
3.2.1.2 HEX head self-drilling screws
[S-MD 01S, S-MD 51S, S-MD 61S, S-MD 01Z, S-MD 51Z]
35
3.2.1.3 HEX head carbon steel self-drilling screws with pressed-on flange [S-MD 21Z, S-MDU 21Z] 37
3.2.1.4 HEX/Pan head self-drilling screws with extended drill capacity
[S-MD 01LPS, S-MD 01LS, S-MD 01LSS, S-MD 31LPS, S-MD 31LPSS, S-MD 41LS,
S-MD 51LS, S-MD 61LS, S-MD 71LS, S-MD 51LZ, S-MD 51LSS]
38
3.2.2 Tip #3 screws for light and medium applications
40
3.2.2.1 HEX head self-drilling screws without sealing washer
[S-MD 03Z, S-MD 23Z, S-MD 03C, S-MD 03S, S-MD 03SS]
40
3.2.2.2 HEX head self-drilling screws with sealing washer
[S-MD 53Z, S-MD 43S, S-MD 53S, S-MD 63S, S-MD 73S, S-MD 53SS]
42
3.2.2.3 Pan head self-drilling screws with and without sealing washer
[S-MD 03PZ, S-MD 03PS, S-MD 33PS, S-MD 03PSS, S-MD 33PSS]
44
3.2.3 Tip #5 screws for medium to heavy applications
46
3.2.3.1 HEX head self-drilling screws without sealing washer
[S-MD 05Z, S-MD 25Z, S-MD 05S, S-MD 05SS]
46
3.2.3.2 HEX head self-drilling screws with sealing washer
[S-MD 55Z, S-MD 65Z, S-MD 55S, S-MD 65S, S-MD 75S, S-MD 55SS]
48
3.2.3.3 Pan head self-drilling screws with and without sealing washer
[S-MD 05PS, S-MD 35PS, S-MD 35PSS]
50
3.2.4 Screws for wood/metal and metal/wood applications
51
3.2.4.1 HEX head self-drilling screws without sealing washer
[S-MDW 01Z, S-MDW 01C, S-MDW 01S]
51
3.2.4.2 HEX head self-drilling screws with sealing washer
[S-MDW 51Z, S-MDW 61Z, S-MDW 71Z, S-MDW 51C, S-MDW 61C
S-MDW 71C, S-MDW 51S, S-MDW 61S, S-MDW 71S]
52
3.2.4.3 Countersunk head self-drilling wing tip screws
[S-WD 11Z, S-WD 11C, S-WD 13C, S-WD 15C]
54
3.2.5 Wafer head carbon steel self-drilling screws without sealing washer
[S-MD 01ZW, S-MD 03ZW, S-MD 05ZW]
55
28
www.hilti.group
Selection of the right screw Sbtaeseicl/sM&eHtailtsi cnroemwepnocrlatftoulrioe
3.3
Screws for light ventilated façade applications
56
3.3.1 Stainless steel self-drilling screws for fastening Aluminum brackets and profiles
[S-AD 01S, S-AD 01SS, S-AD 01LSS, S-AD 01LHSS, S-AD 01LPSS]
56
3.3.2 Stainless steel self-drilling screws for fastening cladding panels [S-PS 01S, S-PD 01S]
57
3.3.3 Stainless steel screws for hidden fastenings of HPL panels [S-HP 02SS, S-FP 01SS]
58
3.4
Screws for sandwich applications
59 3
3.4.1 3.4.2 3.4.3 3.4.4 3.4.5 3.4.6 3.4.7
HEX head stainless steel self-drilling screws for light and medium steel substructure
[S-CD 53S, S-CD 63S, S-CD 73S]
59
HEX head carbon steel self-drilling screws for light and medium steel substructure
[S-CD 53C, S-CD 63C]
61
HEX head stainless steel self-drilling screws for thick steel substructure with twisted drill tip
[S-CD 55GS, S-CD 65GS, S-CD 75GS]
63
HEX head stainless steel self-drilling screws for thick steel substructure
[S-CD 55S, S-CD 65S, S-CD 75S]
65
HEX head carbon steel self-drilling screws for thick steel substructure
[S-CD 55C, S-CD 65C]
67
HEX head stainless steel self-drilling screws for wood base materials
[S-CDW 51S, S-CDW 61S, S-CDW 71S]
68
HEX head carbon steel self-drilling screws for wood base materials [S-CDW 61C]
70
3.5
Structural self-tapping screws
71
3.5.1 Stainless steel self-tapping screws for thick base materials
[S-MP 52S, S-MP 62S, S-MP 72S]
71
3.5.2 Stainless steel self-tapping screws for thick base materials
[S-MP 54S, S-MP 64S, S-MP 74S]
73
3.5.3 Galvanized self-tapping screws for thick base materials
[S-MP 52Z]
75
3.5.4 Stainless steel self-tapping screws for thin materials and wood
[S-MP 53S, S-MP 63S, S-MP 73S]
76
3.5.5 Galvanized self-tapping screws for thin materials and wood
[S-MP 53Z]
78
3.6
Non-structural Steel/Metal screws for HVAC applications
79
www.hilti.group
29
3.1 Collated screws for decking applications with stand-up decking tool SDT 9
3.1.1Collated side-lap fastening screws
S-MS 01S M9 / S-MS 01Z M9 / S-MD 01Z M9 / S-MD 03Z M9 / S-MDU 21Z M9
Collated self-drilling screws for use with the SDT 9 stand-up handle for side-lap fastenings
3
G
$ 6
6: 6: 6:
G
'& '&0)
0)
/
/
G
'&
0)
6:
/
S-MS 01S 4.8x20 M9
S-MS 01Z 4.8x20 M9
S-MD 01Z 4.8x19 M9
S-MD 03Z 4.8x19 M9
S-MDU 21Z 6.3x22 M9
· One strip contains 25 screws
Ordering description
Technology
Collated side-lap fastening screws
S-MS 01Z 4.8x20 M9
Speedy, zinc-plated
S-MS 01S 4.8x20 M9
Speedy, A2 Bi-metal
S-MD 01Z 4.8x19 M9
S-MD 03Z 4.8x19 M9
S-MDU 21Z 6.3x22 M9
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Washer size
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
1.2 2.5
1.2 2.5
4.8
20
1 2
1 4
4.8
20
1.2 2.75 1.2 10
4.8
19
2.1 4.5
2.1 8
4.8
19
1.2 3
1.2 15
6.3
22
None None None None None
Hexagon 8 250 Hexagon 8 250 Hexagon 8 250 Hexagon 8 250 Hexagon 8 250
2204301 2229872 2204302 2229873 2204308
Reference: · More Information see approval ETA-10/0182 (Zinc-plated Carbon Steel) and ETA-18/0880 (A2 Bi-metal) · For stand-up decking tool SDT 9 see chapter 4.3
30
www.hilti.group
3.1 Collated screws for decking applications with stand-up decking tool SDT 9
3.1.2Collated self-drilling screws for metal sheet to frame fastening S-MD 03Z M9 / S-MD 23Z M9 / S-MD 25Z M9
Collated self-drilling screws for use with the SDT 9 stand-up handle for fastening metal sheet to frame
3
G
'&
0)
6:
/
G
6:
'&
0)
/
S-MD 03Z 5.5x25 M9
S-MD 25Z 5.5x40 M9
S-MD 23Z 5.5x22 M9
· One strip contains 25 screws
S-MD 23Z 6.3x22 M9
Reference:
· More Information see approval ETA-10/0182. · For stand-up decking tool SDT 9 see chapter 4.3
www.hilti.group
31
3.1 Collated screws for decking applications with stand-up decking tool SDT 9
Collated self-drilling screws for metal sheet to frame fastening S-MD 03Z M9 / S-MD 23Z M9 / S-MD 25Z M9
Collated self-drilling screws for use with the SDT 9 stand-up handle for fastening metal sheet to frame
Ordering description
3
Technology
Substructure
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Collated self-drilling screws for metal sheet to frame fastening
S-MD 03Z 5.5x25 M9
Racing Tip Steel
2.6 6
2.6 13
5.5
25
S-MD 23Z 5.5x22 M9
Racing Tip Steel, HTU channel
2.6 6
2.6 10
5.5
22
S-MD 23Z 6.3x22 M9
Racing Tip Steel, HTU channel
2.6 6
2.6 10
6.3
22
S-MD 25Z 5.5x40 M9
Racing Tip Steel
4.6 15
4.6 18
5.5
40
Washer size
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
None
Pressedon flange
Pressedon flange
Pressedon flange
Hexagon 8 250 Hexagon 8 250 Hexagon 8 250 Hexagon 8 250
2204304 2204306 2204307 2229874
Reference: · More Information see approval ETA-10/0182. · For stand-up decking tool SDT 9 see chapter 4.3
32
www.hilti.group
3.2.1 Tip #1 screws for light applications
3.2.1.1 HEX/Pan head self-drilling screws, chip-less
S-MS 01S / S-MS 41S / S-MS 51S S-MS 01PS / S-MS 31PS S-MS 01Z / S-MS 41Z / S-MS 51Z
Fast, chip-less and high-load self-stitching screws for light applications
$
G
'& 0)
6:
/
$$
6:6:
GG
'&'& 00) ) //
6: 6:
G G
'& '0&) 0) / /
6: 6:
G G '& 0')& 0) / /
3.2 Siding applications
3
Reference:
· More Information see approval ETA-18/0880 and ETA-10/0182 · The screws cannot be over-compressed because of undercut design below screw head.
www.hilti.group
33
3.2 Siding applications
3.2.1.1 Self-drilling screws for light applications, chip-less
S-MS 01S / S-MS 41S / S-MS 51S S-MS 01PS / S-MS 31PS S-MS 01Z / S-MS 41Z / S-MS 51Z
The fastest stainless steel chipless overlapping screw
3
Ordering description
Screw Technology
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Zinc-plated carbon steel self-drilling HEX head screws
S-MS 01Z 4.8x20
Speedy
1.2 2.5
1.2 2.5
4.8
20
S-MS 51Z 4.8x20
Speedy
1 2
1 4
4.8
20
Perfect Sealing
None 16
Colored zinc-plated carbon steel self-drilling HEX head screws
S-MS 41Z 4.8x20 RAL 9006 Speedy
1 2
1 4
4.8
20
14
Perfect Sealing
S-MS 51Z 4.8x20 RAL 9010 Speedy
1 2
1 4
4.8
20
16
Perfect Sealing
S-MS 41Z 4.8x20 RAL 9010 Speedy
1 2
1 4
4.8
20
14
Perfect Sealing
S-MS 51Z 4.8x20 RAL 9006 Speedy
1 2
1 4
4.8
20
16
Perfect Sealing
Stainless steel self-drilling HEX head screws
S-MS 01S 4.8x20
Speedy
1 2
1 4
4.8
20
S-MS 41S 4.8x20
Speedy
1 2
1 4
4.8
20
Perfect Sealing
S-MS 51S 4.8x20
Speedy
1 2
1 4
4.8
20
Perfect Sealing
None 14
16
Stainless steel self-drilling pan head screws
S-MS 01PS 4.8x20
Speedy
0.8 2
0.8 4
4.8
20
S-MS 31PS 4.8x20
Speedy
0.8 2
0.8 4
4.8
20
Perfect Sealing
None 12
EPDM thickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
None 3
Hexagon 8 Hexagon 8
1'000 500
385448 2083695
3
Hexagon 8 500
2089264
3
Hexagon 8 500
2089267
3
Hexagon 8 500
2089265
3
Hexagon 8 500
2089266
None 3
3
Hexagon 8 Hexagon 8
1'000 500
Hexagon 8 500
2083693 2083699
2083980
None 3
TX 25 TX 25
1'000 500
2229868 2229869
Reference: · More Information see approval ETA-18/0880 and ETA-10/0182 · The screws cannot be over-compressed because of undercut design below screw head.
34
www.hilti.group
3.2.1.2 HEX head self-drilling screws
S-MD 01S / S-MD 51S / S-MD 61S S-MD 01Z / S-MD 51Z
Universal self-drilling screw for light applications
$
G
G
6:
6:
'&
'&0) 0)
/
/
$
6:
'&
0)
'& '& 0)0)
$
G
G G
6:6:/
/ /
3.2 Siding applications
3
Ordering description
Screw Technology
Drilling capacity range (DC)
Thickness fastened range (MF)
Screw diameter (d)
[mm]
[mm]
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Zinc plated carbon steel self-drilling HEX head screws
S-MD 01Z 4.2x13
1.2 2.5
1.2 4.5
4.2
13
S-MD 01Z 4.2x16
1.2 2.5
1.2 7.5
4.2
16
S-MD 01Z 4.8x13
1.2 2.75 1.2 4
4.8
13
S-MD 01Z 4.8x16
1.2 2.75 0.5 7
4.8
16
S-MD 01Z 4.8x19
1.2 2.75 1.2 10
4.8
19
S-MD 01Z 5.5x19
1.2 3
1.2 9
5.5
19
S-MD 01Z 6.3x19
1.2 3
1.2 8.5
6.3
19
S-MD 51Z 4.8x19
Racing Tip 1.2 2.75 1.2 8
4.8
19
S-MD 51Z 6.3x19
Racing Tip 1.2 3
1.2 6
6.3
19
None None None None None None None 16 16
Colored Zinc plated carbon steel self-drilling HEX head screws
S-MD 51Z 4.8x19 RAL9006
Racing Tip 1.2 2.75 1.2 8
4.8
19
16
S-MD 51Z 4.8x19 RAL9010
Racing Tip 1.2 2.75 1.2 8
4.8
19
16
EPDM thickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
None None None None None None None 3 3
Hexagon 7 1'000 Hexagon 7 1'000 Hexagon 8 1'000 Hexagon 8 1'000 Hexagon 8 500 Hexagon 8 500 Hexagon 8 500 Hexagon 8 500 Hexagon 3/8 500
224500 10405 224501 2222543 219557 219558 219559 219032 219034
3
Hexagon 8 500
224614
3
Hexagon 8 500
224613
Reference: · More Information see approval ETA-18/0880 and ETA-10/0182
www.hilti.group
35
3.2 Siding applications
HEX head self-drilling screws
S-MD 01S / S-MD 51S / S-MD 61S S-MD 01Z / S-MD 51Z
Universal self-drilling screw for light applications
Ordering description
3
Screw Technology
Drilling capacity range (DC)
Thickness fastened range (MF)
Screw diameter (d)
[mm]
[mm]
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Stainless steel self-drilling HEX head screws
S-MD 01S 4.8x22
1.2 2
1.2 8
4.8
23
S-MD 51S 4.8x22
1.2 2
1.2 6
4.8
23
S-MD 51S 4.8x25
1.2 2
1.2 9
4.8
26
S-MD 51S 5.5x25
1.2 3
1.2 8
5.5
26
S-MD 51S 5.5X32
1.2 3
1.2 15
5.5
33
S-MD 51S 5.5X38
1.2 3
1.2 21
5.5
39
S-MD 51S 5.5X50
1.2 3
1.2 33
5.5
51
S-MD 61S 4.8x22
1.2 2
1.2 6
4.8
23
None 16 16 16 16 16 16 19
EPDM thickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
None 3 3 3 3 3 3 3
Hexagon 8 500 Hexagon 8 250 Hexagon 8 500 Hexagon 8 500 Hexagon 8 250 Hexagon 8 250 Hexagon 8 250 Hexagon 8 500
285608 375228 375229 378257 375230 375231 375232 283052
Reference: · More Information see approval ETA-18/0880 and ETA-10/0182
36
www.hilti.group
3.2 Siding applications
3.2.1.3 HEX head carbon steel self-drilling screws with pressed-on flange S-MD 21Z / S-MDU 21Z
The universal and robust self-drilling screws for light applications
3
G
6:
'&
0)
/
Ordering description
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d)
[mm]
Screw length (L)
[mm]
HEX head carbon steel self-drilling screws with pressed-on flange
S-MD 21Z 5.5x25
1.2 3
1.2 15
5.5
25
S-MDU 21Z 6.3x22
1.2 3
1.2 9
6.3
22
Washer size [mm]
Screw drive / recess type
Sales quantity
[pc]
15 pressed-on flange
15 pressed-on flange
Hexagon 8
500
Hexagon 3/8 500
Item number
234588 201990
www.hilti.group
37
3.2 Siding applications
3.2.1.4 Self-drilling screws for light applications with extended drill capacity
S-MD 01LPS
S-MD 01LSS
S-MD 31LPS / S-MD 31LPSS
S-MD 01LS / S-MD 41LS / S-MD 51LS / S-MD 61LS / S-MD 71LS
S-MD 51LZ
3
S-MD 51LSS
The universal and robust self-drilling screws for a wide range of light applications
$
6:
G '&
0) /
$ +
$
+G + G G
'& 0)'& '&0) 0)
/
/ /
$ +
$
+G + G G
'& 0)'& '&0) 0)
/
/ /
$
G
G
6:
6:
'&
'&0) 0)
/
/
Reference: · More Information see approval ETA-18/0880
38
www.hilti.group
3.2 Siding applications
Self-drilling screws for light applications with extended drill capacity
S-MD 01LPS
S-MD 01LSS
S-MD 31LPS / S-MD 31LPSS
S-MD 01LS / S-MD 41LS / S-MD 51LS / S-MD 61LS / S-MD 71LS
S-MD 51LZ
S-MD 51LSS
3
The universal and robust self-drilling screws for a wide range of light applications
Ordering description
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Zinc-plated carbon steel self-drilling HEX head screws
S-MD 51LZ 4.8x38
1.2 2.75 1.2 13
4.8
38
16
Colored zinc-plated carbon steel self-drilling HEX head screws
S-MD 51LZ 4.8x38 RAL9006
1.2 2.75 1.2 13
4.8
38
16
S-MD 51LZ 4.8x38 RAL9010
1.2 2.75 1.2 13
4.8
38
16
Stainless steel (A2) self-drilling pan head screws
S-MD 01LPS 5.5x25
1.2 4
1.2 8
5.5
26
S-MD 01LPS 5.5x32
1.2 4
1.2 15
5.5
33
S-MD 01LPS 5.5x38
1.2 4
1.2 21
5.5
39
S-MD 31LPS 5.5x25 S-MD 31LPS 5.5x32 S-MD 31LPS 5.5x38
1.2 3.75 1.2 8
5.5
25
1.2 3.75 1.2 15
5.5
32
1.2 3.75 1.2 21
5.5
38
None None None 12 12 12
Stainless steel (A2) self-drilling HEX head screws
S-MD 01LS 5.5x25
1.2 3.75 1.2 8
5.5
25
S-MD 41LS 5.5x25
1.2 3.75 1.2 5
5.5
25
S-MD 51LS 5.5x25
1.2 3.75 1.2 5
5.5
25
S-MD 51LS 5.5x50
1.2 3.75 1.2 30
5.5
51
S-MD 61LS 5.5x25
1.2 3.75 1.2 5
5.5
25
S-MD 71LS 5.5x25
1.2 3,75 1.2 5
5.5
25
None 14 16 16 19 22
Colored stainless steel (A2) self-drilling HEX head screws
S-MD 51LS 5.5x25 RAL 9006
1.2 3.75 1.2 5
5.5
25
16
S-MD 51LS 5.5x25 RAL 7016
1.2 3.75 1.2 5
5.5
25
16
S-MD 51LS 5.5x25 RAL 9007
1.2 3.75 1.2 5
5.5
25
16
Stainless steel (A4) self-drilling HEX head screws
S-MD 01LSS 5.5x25
1.2 3.75 1.2 5
5.5
26
S-MD 01LSS 5.5x32
1.2 3.75 1.2 5
5.5
33
S-MD 51LSS 5.5x25
1.2 3.75 1.2 5
5.5
26
S-MD 51LSS 5.5x32
1.2 3.75 1.2 13
5.5
33
S-MD 51LSS 5.5x50
1.2 3.75 1.2 31
5.5
51
None None 16 16 16
Stainless steel (A4) self-drilling pan head screws
S-MD 31LPSS 5.5x25
1.2 4
1.2 8
5.5
25
12
S-MD 31LPSS 5.5x32
1.2 4
1.2 15
5.5
32
12
S-MD 31LPSS 5.5x38
1.2 4
1.2 21
5.5
38
12
Screw drive / recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
Hexagon 8 3
250
252801
Hexagon 8 3 Hexagon 8 3
250
258791
250
258790
TX 25
None
500
TX 25
None
250
TX 25
None
250
TX 25
3
500
TX 25
3
250
TX 25
3
250
2229856 2229857 2229858 2229848 2229849 2229850
Hexagon 8 None
500
Hexagon 8 3
500
Hexagon 8 3
500
Hexagon 8 3
500
Hexagon 8 3
500
Hexagon 8 3
500
285609 2118297 378258 2166430 283058 285596
Hexagon 8 3 Hexagon 8 3 Hexagon 8 3
500
3415133
500
3457209
500
3471826
Hexagon 8 None
250
Hexagon 8 None
250
Hexagon 8 3
500
Hexagon 8 3
250
Hexagon 8 3
250
2114545 2114544 2096593 2114547 2166435
TX 25
3
TX 25
3
TX 25
3
500
2229870
250
2229819
250
2229843
Reference: · More Information see approval ETA-18/0880
www.hilti.group
39
3.2.2 Tip #3 screws for light and medium applications
3.2.2.1H EX head self-drilling screws without sealing washer
S-MD 03Z / S-MD 23Z S-MD 03C / S-MD 03S / S-MD 03SS
The universal self-drilling screws for medium applications without sealing function 3
3.2 Siding applications
G
G G
'&
0)
6: 6:
'& '&
0) /
0)
6:
/
$
/
$
$ $
G
6:
'&
0)
/
Reference:
· More Information see approval ETA-18/0182 and ETA-18/0880. · S-MD 03Z 4.2x16 screws are not covered by any certificate of usability (e.g. ETA or abZ). They are intended to be used for non-structural application,
such as HVAC.
40
www.hilti.group
3.2 Siding applications
HEX head self-drilling screws without sealing washer
S-MD 03Z / S-MD 23Z S-MD 03C / S-MD 03S / S-MD 03SS
The universal self-drilling screws for medium applications without sealing function
Ordering description
Screw Technology
Zinc-plated carbon steel self-drilling HEX head screws
S-MD 03Z 4.2x16
Racing Tip
S-MD 03Z 4.8x16
Racing Tip
S-MD 03Z 4.8x19
Racing Tip
S-MD 03Z 5.5x19
Racing Tip
S-MD 03Z 5.5x22
Racing Tip
S-MD 03Z 5.5x25
Racing Tip
S-MD 03Z 5.5x32
Racing Tip
S-MD 03Z 5.5x38
Racing Tip
S-MD 03Z 5.5x50
Racing Tip
S-MD 03Z 6.3x19
Racing Tip
S-MD 03Z 6.3x22
Racing Tip
S-MD 03Z 6.3x25
Racing Tip
S-MD 03Z 6.3x32
Racing Tip
S-MD 03Z 6.3x38
Racing Tip
S-MD 03Z 6.3x50
Racing Tip
S-MD 03Z 6.3x70
Racing Tip
S-MD 23Z 5.5x22
Racing Tip
S-MD 23Z 6.3x19
Racing Tip
S-MD 23Z 6.3x22
Racing Tip
S-MD 23Z 6.3x25
Racing Tip
S-MD 23Z 6.3x50
Racing Tip
Duplex-coated carbon steel self-drilling HEX head screws
S-MD 03C 5.5x22
Racing Tip
S-MD 03C 6.3x70
Racing Tip
Stainless steel (A2) self-drilling HEX head screws
S-MD 03S 5.5x25
Racing Tip
S-MD 03S 5.5x32
Racing Tip
S-MD 03S 5.5x38
Racing Tip
S-MD 03S 5.5x50
Racing Tip
S-MD 03S 5.5x63
Racing Tip
S-MD 03S 6.3x25
Racing Tip
S-MD 03S 6.3x32
Racing Tip
Stainless steel (A4) self-drilling HEX head screws
S-MD 03SS 5.5x25
Racing Tip
S-MD 03SS 5.5x32
Racing Tip
Drilling
Thickness Screw
Screw
Washer
Screw
Sales
Item
capacity
fastened
diameter length
size
range (DC) range (MF) (d)
(L)
drive/
quantity
number
recess
3
[mm]
[mm]
[mm]
[mm]
[mm]
type
[pc]
2.1 3.5
2.1 6
4.2
16
2.1 4.5
2.1 5
4.8
16
2.1 4.5
2.1 8
4.8
20
2.6 6
2.6 7
5.5
20
2.6 6
2.6 10
5.5
23
2.6 6
2.6 13
5.5
26
2.6 6
2.6 20
5.5
33
2.6 6
2.6 26
5.5
39
2.6 6
2.6 38
5.5
51
2.6 6
2.6 7
6.3
20
2.6 6
2.6 10
6.3
23
2.6 6
2.6 13
6.3
26
2.6 6
2.6 20
6.3
33
2.6 6
2.6 26
6.3
39
2.6 6
2.6 38
6.3
51
2.6 6
2.6 58
6.3
71
2.6 6
2.6 10
5.5
23
2.6 6
2.6 7
6.3
20
2.6 6
2.6 10
6.3
23
2.6 6
2.6 13
6.3
26
2.6 6
2.6 38
6.3
51
None None None None None None None None None None None None None None None None 15 pressed-on 15 pressed-on 15 pressed-on 15 pressed-on 15 pressed-on
Hexagon 7 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8 Hexagon 8
Hexagon 8
Hexagon 8
Hexagon 8
Hexagon 8
1'000 500 500 500 500 500 500 500 500 500 500 500 500 500 250 250 500
500
500
500
250
219013 219015 219016 413415 413416 413417 413419 413420 414293 413421 413422 413423 413424 414295 413425 413426 413427
413429
413430
413432
413433
2.6 6
2.6 10
5.5
23
2.6 6
2.6 58
6.3
71
None None
Hexagon 8 500 Hexagon 8 250
2229841 2229842
2.6 6
0.5 10
5.5
27
2.6 6
0.5 17
5.5
34
2.6 6
0.5 23
5.5
40
2.6 6
0.5 35
5.5
52
2.6 6
0.5 48
5.5
65
2.6 6
0.5 10
6.3
27
2.6 6
0.5 17
6.3
34
None None None None None None None
Hexagon 8 500 Hexagon 8 250 Hexagon 8 250 Hexagon 8 250 Hexagon 8 100 Hexagon 8 500 Hexagon 8 500
413408 413409 413410 413411 413412 413413 413414
2.6 6
2.6 10
5.5
27
2.6 6
2.6 17
5.5
34
None None
Hexagon 8 500 Hexagon 8 250
2114790 2114791
Reference:
· More Information see approval ETA-18/0182 and ETA-18/0880. · S-MD 03Z 4.2x16 screws are not covered by any certificate of usability (e.g. ETA or abZ). They are intended to be used for non-structural application,
such as HVAC.
www.hilti.group
41
3.2.2.2H EX head self-drilling screws with sealing washer
S-MD 53Z S-MD 43S / S-MD 53S / S-MD 63S / S-MD 73S S-MD 53SS
The universal self-drilling screws for medium applications with sealing function
3
++
6: 6:
PP
$
$
G G
'& '& 0)
/ 0) /
3.2 Siding applications
Ordering description
Screw Technology
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Zinc-plated carbon steel self-drilling HEX head screws
S-MD 53Z 4.8x19 Racing Tip/Perfect Sealing
2.1 4.5
2.1 6
4.8
19
S-MD 53Z 4.8x32 Racing Tip/Perfect Sealing
2.1 4.5
2.1 20
4.8
32
S-MD 53Z 5.5x19 Racing Tip/Perfect Sealing
2.6 6
2.6 4
5.5
19
S-MD 53Z 5.5x25 Racing Tip/Perfect Sealing
2.6 6
2.6 10
5.5
25
S-MD 53Z 5.5x32 Racing Tip/Perfect Sealing
2.6 6
2.6 17
5.5
32
S-MD 53Z 5.5x38 Racing Tip/Perfect Sealing
2.6 6
2.6 23
5.5
38
S-MD 53Z 5.5x50 Racing Tip/Perfect Sealing
2.6 6
2.6 35
5.5
50
S-MD 53Z 6.3x19 Racing Tip/Perfect Sealing
2.6 6
2.6 4
6.3
19
S-MD 53Z 6.3x25 Racing Tip/Perfect Sealing
2.6 6
2.6 10
6.3
25
S-MD 53Z 6.3x32 Racing Tip/Perfect Sealing
2.6 6
2.6 17
6.3
32
S-MD 53Z 6.3x38 Racing Tip/Perfect Sealing
2.6 6
2.6 23
6.3
38
S-MD 53Z 6.3x50 Racing Tip/Perfect Sealing
2.6 6
2.6 35
6.3
50
Washer size
[mm]
Screw drive/ recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
500
219035
500
224612
500
413440
500
413441
500
413442
250
413443
250
413444
500
413445
500
413446
500
413447
250
413448
250
413449
Reference: · More Information see approval ETA-18/0182 and ETA-18/0880.
42
www.hilti.group
3.2 Siding applications
HEX head self-drilling screws with sealing washer
S-MD 53Z S-MD 43S / S-MD 53S / S-MD 63S / S-MD 73S S-MD 53SS
The universal self-drilling screws for medium applications with sealing function
Ordering description
Screw Technology
Drilling
Thickness Screw
Screw
Washer
Screw
EPDM
Sales
Item
3
capacity
fastened
diameter length (L) size
drive /
thickness quantity
number
range (DC) range (MF) (d)
recess
[mm]
[mm]
[mm]
[mm]
[mm]
type
[mm]
[pc]
Stainless steel (A2) self-drilling HEX head screws
S-MD 43S 5.5x25 Racing Tip/Perfect Sealing
2.6 6
1.2 7
5.5
25
14
Hexagon 8 3
S-MD 43S 5.5x32 Racing Tip/Perfect Sealing
2.6 6
1.2 14
5.5
32
14
Hexagon 8 3
S-MD 43S 5.5x38 Racing Tip/Perfect Sealing
2.6 6
1.2 20
5.5
38
14
Hexagon 8 3
S-MD 43S 5.5x50 Racing Tip/Perfect Sealing
2.6 6
1.2 32
5.5
50
14
Hexagon 8 3
S-MD 43S 5.5x63 Racing Tip/Perfect Sealing
2.6 6
1.2 45
5.5
63
14
Hexagon 8 3
S-MD 53S 5.5x25 Racing Tip/Perfect Sealing
2.6 6
2.1 7
5.5
25
16
Hexagon 8 3
S-MD 53S 5.5x32 Racing Tip/Perfect Sealing
2.6 6
2.1 14
5.5
32
16
Hexagon 8 3
S-MD 53S 5.5x38 Racing Tip/Perfect Sealing
2.6 6
2.1 20
5.5
38
16
Hexagon 8 3
S-MD 53S 5.5x50 Racing Tip/Perfect Sealing
2.6 6
2.1 32
5.5
50
16
Hexagon 8 3
S-MD 53S 5.5x63 Racing Tip/Perfect Sealing
2.6 6
2.1 45
5.5
63
16
Hexagon 8 3
S-MD 63S 6.3x25 Racing Tip/Perfect Sealing
2.6 6
2.1 7
6.3
25
16
Hexagon 8 3
S-MD 63S 5.5x25 Racing Tip/Perfect Sealing
2.6 6
2.1 7
5.5
25
19
Hexagon 8 3
S-MD 63S 5.5x32 Racing Tip/Perfect Sealing
2.6 6
2.1 14
5.5
32
19
Hexagon 8 3
S-MD 63S 5.5x38 Racing Tip/Perfect Sealing
2.6 6
2.1 20
5.5
38
19
Hexagon 8 3
S-MD 63S 5.5x50 Racing Tip/Perfect Sealing
2.6 6
2.1 32
5.5
50
19
Hexagon 8 3
S-MD 63S 5.5x63 Racing Tip/Perfect Sealing
2.6 6
2.1 45
5.5
63
19
Hexagon 8 3
S-MD 63S 6.3x25 Racing Tip/Perfect Sealing
2.6 6
2.1 7
5.5
25
19
Hexagon 8 3
S-MD 63S 5.5x25 Racing Tip/Perfect Sealing
2.6 6
2.1 7
5.5
25
19
Hexagon 8 3
S-MD 63S 5.5x32 Racing Tip/Perfect Sealing
2.6 6
2.1 14
5.5
32
19
Hexagon 8 3
S-MD 63S 5.5x38 Racing Tip/Perfect Sealing
2.6 6
2.1 20
5.5
38
19
Hexagon 8 3
S-MD 63S 5.5x50 Racing Tip/Perfect Sealing
2.6 6
2.1 32
5.5
50
19
Hexagon 8 3
S-MD 63S 5.5x63 Racing Tip/Perfect Sealing
2.6 6
2.1 45
5.5
63
19
Hexagon 8 3
S-MD 63S 6.3x25 Racing Tip/Perfect Sealing
2.6 6
2.1 7
5.5
25
19
Hexagon 8 3
500
414297
250
414300
250
414302
250
414304
100
414307
500
413434
250
413435
250
413436
250
413437
100
413438
500
413439
500
413450
250
413451
250
413452
250
413453
100
413454
500
413455
500
413456
250
413457
250
413458
250
413459
100
413460
500
413461
Stainless steel (A4) self-drilling HEX head screws
S-MD 53SS 5.5x25 Racing Tip/Perfect Sealing
2.6 6
2.6 7
5.5
25
16
Hexagon 8 3
S-MD 53SS 5.5x32 Racing Tip/Perfect Sealing
2.6 6
2.6 14
5.5
32
16
Hexagon 8 3
500
2114792
250
2114793
Reference: · More Information see approval ETA-18/0182 and ETA-18/0880.
www.hilti.group
43
3.2.2.3P an head self-drilling screws with and without sealing washer
S-MD 03PZ S-MD 03PS / S-MD 33PS S-MD 03PSS / S-MD 33PSS
Universal self-drilling screw for a wide range of light and medium applications 3
GG ''&& 00)) //
$
$
G '& 0) /
3.2 Siding applications
Reference:
· More Information see approval ETA-18/0182 and ETA-18/0880. · S-MD 03PZ 4.8x16 screws are not covered by any certificate of usability (e.g. ETA or abZ). They are intended to be used for non-structural application,
such as HVAC.
44
www.hilti.group
3.2 Siding applications
Pan head self-drilling screws with and without sealing washer
S-MD 03PZ S-MD 03PS / S-MD 33PS S-MD 03PSS / S-MD 33PSS
Universal self-drilling screw for a wide range of light and medium applications 3
Ordering description
Screw Technology
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Washer size
[mm]
Screw drive / recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
Zinc-plated carbon steel self-drilling pan head screws
S-MD 03PZ 4.8x16
2.1 4.5
2.1 4
4.8
16
None
PH 2
None
500
388931
Stainless steel (A2) self-drilling pan head head screws
S-MD 03PS 5.5x25 Racing Tip
2.6 6
2.6 10
5.5
27
S-MD 03PS 5.5x32 Racing Tip
2.6 6
2.6 17
5.5
34
S-MD 03PS 5.5x38 Racing Tip
2.6 6
2.6 23
5.5
40
S-MD 03PS 5.5x50 Racing Tip
2.6 6
2.6 35
5.5
52
S-MD 33PS 5.5x25 Racing Tip/Perfect Sealing 2.1 6
2.1 7
5.5
27
S-MD 33PS 5.5x32 Racing Tip/Perfect Sealing 2.1 6
2.1 14
5.5
34
S-MD 33PS 5.5x38 Racing Tip/Perfect Sealing 2.1 6
2.1 20
5.5
40
S-MD 33PS 5.5x50 Racing Tip/Perfect Sealing 2.1 6
2.1 32
5.5
52
None
TX 25
None
500
None
TX 25
None
250
None
TX 25
None
250
None
TX 25
None
250
12
TX 25
3
500
12
TX 25
3
250
12
TX 25
3
250
12
TX 25
3
250
2229859 2229860 2229861 2229862 2229851 2229852 2229853 2229854
Stainless steel (A4) self-drilling pan head screws
S-MD 03PSS 5.5x25 Racing Tip/Perfect Sealing 2.6 6
2.6 10
5.5
27
S-MD 33PSS 5.5x25 Racing Tip/Perfect Sealing 1.5 5.5
2.1 10
5.5
27
S-MD 33PSS 5.5x32 Racing Tip/Perfect Sealing 1.5 5.5
2.1 17
5.5
34
S-MD 33PSS 5.5x38 Racing Tip/Perfect Sealing 1.5 5.5
2.1 23
5.5
40
S-MD 33PSS 5.5x50 Racing Tip/Perfect Sealing 1.5 5.5
2.1 35
5.5
52
None 12 12 12 12
TX 25
3
TX 25
3
TX 25
3
TX 25
3
TX 25
3
500
2278706
500
2229864
250
2229865
250
2229866
250
2229867
Reference:
· More Information see approval ETA-18/0182 and ETA-18/0880. · S-MD 03PZ 4.8x16 screws are not covered by any certificate of usability (e.g. ETA or abZ). They are intended to be used for non-structural application,
such as HVAC.
www.hilti.group
45
3.2.3 Tip #5 screws for medium to heavy applications
3.2.3.1H EX head self-drilling screws without sealing washer
S-MD 05Z / S-MD 25Z S-MD 05S S-MD 05SS
3
Universal self-drilling screws for thick metal applications
GG
66:: $$
$$
''&&
00))
//
6:
G
'& 0)
/
3.2 Siding applications
Ordering description
Screw Technology
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Zinc-plated carbon steel self-drilling HEX head screws
S-MD 05GZ 5.5x40 S-MD 05Z 5.5x40
Racing Tip
4.6 15
4.6 18
5.5
40
S-MD 05GZ 5.5x52 S-MD 05Z 5.5x52
Racing Tip
4.6 15
4.6 30
5.5
52
S-MD 05GZ 5.5x65 S-MD 05Z 5.5x65
Racing Tip
4.6 15
4.6 43
5.5
65
S-MD 05GZ 5.5x82 S-MD 05Z 5.5x82
Racing Tip
4.6 15
4.6 60
5.5
82
S-MD 05GZ 5.5x102 S-MD 05Z 5.5x102
Racing Tip
4.6 15
4.6 80
5.5
102
S-MD 25GZ 5.5x40 S-MD 25Z 5.5x40
Racing Tip
4.6 15
4.6 18
5.5
40
Washer size
[mm]
Screw drive / recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
None
Hexagon 8 None
250
None
Hexagon 8 None
250
None
Hexagon 8 None
100
None
Hexagon 8 None
100
None
Hexagon 8 None
100
15
Hexagon 8 None
250
pressed-on
2054483 2054484 2054485 2054486 2054487 2054488
Reference: · More Information see approval ETA-18/0182 and ETA-18/0880.
46
www.hilti.group
3.2 Siding applications
HEX head self-drilling screws for thick metal applications without sealing washer
S-MD 05Z / S-MD 25Z S-MD 05S S-MD 05SS
Universal self-drilling screws for thick metal applications 3
Ordering description
Screw Technology
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Washer size
[mm]
Screw drive / recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
Stainless steel (A2) self-drilling HEX head screws
S-MD 05S 5.5x40
Racing Tip
4.6 15
4.6 14
5.5
S-MD 05S 5.5x52
Racing Tip
4.6 15
4.6 26
5.5
S-MD 05S 5.5x65
Racing Tip
4.6 15
4.6 39
5.5
S-MD 05S 5.5x82
Racing Tip
4.6 15
4.6 56
5.5
S-MD 05S 5.5x102
Racing Tip
4.6 15
4.6 76
5.5
41
None
Hexagon 8 None
250
2209615
53
None
Hexagon 8 None
250
2209616
66
None
Hexagon 8 None
100
2209617
83
None
Hexagon 8 None
100
2209618
103
None
Hexagon 8 None
100
2209619
Stainless steel (A4) self-drilling HEX head screws
S-MD 05SS 5.5x40
Racing Tip
4.6 15
4.6 14
5.5
S-MD 05SS 5.5x52
Racing Tip
4.6 15
4.6 26
5.5
S-MD 05SS 5.5x65
Racing Tip
4.6 15
4.6 39
5.5
S-MD 05SS 5.5x82
Racing Tip
4.6 15
4.6 56
5.5
S-MD 05SS 5.5x102
Racing Tip
4.6 15
4.6 76
5.5
41
None
Hexagon 8 None
250
2211432
53
None
Hexagon 8 None
250
2211433
66
None
Hexagon 8 None
100
2211434
83
None
Hexagon 8 None
100
2211018
103
None
Hexagon 8 None
100
2211019
Reference: · More Information see approval ETA-18/0182 and ETA-18/0880.
www.hilti.group
47
3.2.3.2H EX head self-drilling screws with sealing washer
S-MD 55Z / S-MD 65Z S-MD 55S / S-MD 65S / S-MD 75S S-MD 55SS
Universal self-drilling screws for thick metal applications
3
66:: PPPP
$$
GG
''&& 00))
//
$$
3.2 Siding applications
Ordering description Screw Technology
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Zinc-plated carbon steel self-drilling HEX head screws
S-MD 55GZ 5.5x40 S-MD 55Z 5.5x40
Racing Tip Perfect Sealing
4.6 15
4.6 15
5.5
40
S-MD 55GZ 5.5x52 S-MD 55Z 5.5x52
Racing Tip Perfect Sealing
4.6 15
4.6 27
5.5
52
S-MD 55GZ 5.5x65 S-MD 55Z 5.5x65
Racing Tip Perfect Sealing
4.6 15
4.6 40
5.5
65
S-MD 55GZ 5.5x82 S-MD 55Z 5.5x82
Racing Tip Perfect Sealing
4.6 15
4.6 57
5.5
82
S-MD 55GZ 5.5x102 Racing Tip
S-MD 55Z 5.5x102
Perfect Sealing
4.6 15
4.6 77
5.5
102
S-MD 65GZ 5.5x40 S-MD 65Z 5.5x40
Racing Tip Perfect Sealing
4.6 15
4.6 15
5.5
40
Colored zinc-plated carbon steel self-drilling HEX head screws
S-MD 55GZ 5.5x40 RAL9010
Racing Tip Perfect Sealing
4.6 15
4.6 15
5.5
40
S-MD 55GZ 5.5x40 RAL9006
Racing Tip Perfect Sealing
4.6 15
4.6 15
5.5
40
Washer size
[mm]
Screw drive / recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
16
Hexagon 8 3
19
Hexagon 8 3
250
2054489
250
2054830
100
2054831
100
2054832
100
2054833
250
2090661
16
Hexagon 8 3
16
Hexagon 8 3
250
2054834
250
2054835
Reference: · More Information see approval ETA-18/0182 and ETA-18/0880
48
www.hilti.group
3.2 Siding applications
HEX head self-drilling screws with sealing washer
S-MD 55Z / S-MD 65Z S-MD 55S / S-MD 65S / S-MD 75S S-MD 55SS
Universal self-drilling screws for thick metal applications
Ordering description Screw Technology
3
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Washer size
[mm]
Screw drive / recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
Stainless steel (A2) self-drilling HEX head screws
S-MD 55S 5.5x40
Racing Tip Perfect Sealing
4.6 15
4.6 11
5.5
S-MD 55S 5.5x52
Racing Tip Perfect Sealing
4.6 15
4.6 23
5.5
S-MD 55S 5.5x65
Racing Tip Perfect Sealing
4.6 15
4.6 36
5.5
S-MD 55S 5.5x82
Racing Tip Perfect Sealing
4.6 15
4.6 53
5.5
S-MD 55S 5.5x102
Racing Tip Perfect Sealing
4.6 15
4.6 73
5.5
S-MD 65S 5.5x40
Racing Tip Perfect Sealing
4.6 15
4.6 11
5.5
S-MD 65S 5.5x52
Racing Tip Perfect Sealing
4.6 15
4.6 23
5.5
S-MD 65S 5.5x65
Racing Tip Perfect Sealing
4.6 15
4.6 36
5.5
S-MD 65S 5.5x82
Racing Tip Perfect Sealing
4.6 15
4.6 53
5.5
S-MD 65S 5.5x102
Racing Tip Perfect Sealing
4.6 15
4.6 73
5.5
S-MD 75S 5.5x40
Racing Tip Perfect Sealing
4.6 15
4.6 11
5.5
S-MD 75S 5.5x52
Racing Tip Perfect Sealing
4.6 15
4.6 23
5.5
S-MD 75S 5.5x65
Racing Tip Perfect Sealing
4.6 15
4.6 36
5.5
S-MD 75S 5.5x82
Racing Tip Perfect Sealing
4.6 15
4.6 53
5.5
S-MD 75S 5.5x102
Racing Tip Perfect Sealing
4.6 15
4.6 73
5.5
40
16
Hexagon 8 3
52
16
Hexagon 8 3
65
16
Hexagon 8 3
82
16
Hexagon 8 3
102
16
Hexagon 8 3
40
19
Hexagon 8 3
52
19
Hexagon 8 3
65
19
Hexagon 8 3
82
19
Hexagon 8 3
102
19
Hexagon 8 3
40
22
Hexagon 8 3
52
22
Hexagon 8 3
65
22
Hexagon 8 3
82
22
Hexagon 8 3
102
22
Hexagon 8 3
250
2209960
250
2209961
100
2209962
100
2209963
100
2209964
250
2209965
250
2209966
100
2209967
100
2209968
100
2209969
250
2209970
250
2209971
100
2209972
100
2209613
100
2209614
Stainless steel (A4) self-drilling HEX head screws
S-MD 55SS 5.5x40
Racing Tip Perfect Sealing
4.6 15
4.6 11
5.5
S-MD 55SS 5.5x52
Racing Tip Perfect Sealing
4.6 15
4.6 23
5.5
S-MD 55SS 5.5x65
Racing Tip Perfect Sealing
4.6 15
4.6 36
5.5
S-MD 55SS 5.5x82
Racing Tip Perfect Sealing
4.6 15
4.6 53
5.5
S-MD 55SS 5.5x102
Racing Tip Perfect Sealing
4.6 15
4.6 73
5.5
40
16
Hexagon 8 3
52
16
Hexagon 8 3
65
16
Hexagon 8 3
82
16
Hexagon 8 3
102
16
Hexagon 8 3
250
2211435
250
2209974
100
2211017
100
2211430
100
2211431
Reference: · More Information see approval ETA-18/0182 and ETA-18/0880
www.hilti.group
49
3.2.3.3 Pan head self-drilling screws with and without sealing washer
S-MD 05PS/ S-MD 35PS S-MD 35PSS
Universal self-drilling screw for light applications
3
$ +
$ +
G
'&
0)
/
3.2 Siding applications
$ +
$ +
G
'&
0)
/
Ordering description
Screw Technology
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Stainless steel (A2) self-drilling pan head screws
S-MD 05PS 5.5x40
Racing Tip
4.6 15
4.6 14
5.5
41
S-MD 05PS 5.5x52
Racing Tip
4.6 15
4.6 26
5.5
53
S-MD 35PS 5.5x40
Racing Tip Perfect Sealing
4.6 15
4.6 11
5.5
41
S-MD 35PS 5.5x52
Racing Tip Perfect Sealing
4.6 15
4.6 23
5.5
53
Stainless steel (A4) self-drilling pan head screws
S-MD 35PSS 5.5x40
Racing Tip Perfect Sealing
4.6 12
4.6 12
5.5
41
S-MD 35PSS 5.5x52
Racing Tip Perfect Sealing
4.6 12
4.6 26
5.5
53
Washer size [mm]
Screw drive / recess type
EPDM thickness
[mm]
Sales quantity
[pc]
Item number
None
TX 25
None
250
None
TX 25
None
250
12
TX 25
3
250
12
TX 25
3
250
2229863 2229846 2229855
2229845
12
TX 25
3
12
TX 25
3
250
2229844
250
2229847
Reference: · More Information see approval ETA-18/0182 and ETA-18/0880
50
www.hilti.group
3.2.4 Screws for wood/metal and metal/wood applications 3.2.4.1H EX head self-drilling screws without sealing washer
S-MDW 01Z / S-MDW 01C / S-MDW 01S
Self-drilling screws for fastening steel and aluminum to wood
3.2 Siding applications
3
Ordering description
Zinc-plated carbon steel self-drilling HEX head screws S-MDW 01Z 6.5x40 S-MDW 01Z 6.5x60 S-MDW 01Z 6.5x80 S-MDW 01Z 6.5x100
Duplex-coated carbon steel self-drilling HEX head screws S-MDW 01C 6.5x40 S-MDW 01C 6.5x60 S-MDW 01C 6.5x80 S-MDW 01C 6.5x100
Stainless steel (A2) self-drilling HEX head screws S-MDW 01S 6.5x40 S-MDW 01S 6.5x60 S-MDW 01S 6.5x80 S-MDW 01S 6.5x100
Drilling capacity range (DC)
[mm]
Thickness fastened range (MF)
[mm]
Effective range screw-in length (leff) [mm]
Screw diameter (d)
[mm]
Screw length (L)
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
0.4 2 0.4 2 0.4 2 0.4 2
0.4 4
30 55
6.5
0.4 24
30 55
6.5
0.4 44
30 55
6.5
0.4 64
30 64
6.5
41
Hexagon 8 250
2291237
61
Hexagon 8 150
2291238
81
Hexagon 8 100
2291239
101
Hexagon 8 100
2291260
0.4 2 0.4 2 0.4 2 0.4 2
0.4 4
30 55
6.5
0.4 24
30 55
6.5
0.4 44
30 55
6.5
0.4 64
30 64
6.5
41
Hexagon 8 250
2291273
61
Hexagon 8 150
2291274
81
Hexagon 8 100
2291275
101
Hexagon 8 100
2291276
0.4 2 0.4 2 0.4 2 0.4 2
0.4 4
30 55
6.5
0.4 24
30 55
6.5
0.4 44
30 55
6.5
0.4 64
30 64
6.5
41
Hexagon 8 250
2284378
61
Hexagon 8 150
2284379
81
Hexagon 8 100
2284771
101
Hexagon 8 100
2284772
Reference: · More Information see approval ETA-18/0880 (Stainless steel) and ETA-20/0858 (Carbon steel)
www.hilti.group
51
3.2.4.2H EX head self-drilling screws with sealing washer
S-MDW 51Z / S-MDW 61Z / S-MDW 71Z S-MDW 51C / S-MDW 61C / S-MDW 71C S-MDW 51S / S-MDW 61S / S-MDW 71S
Self-drilling screws for fastening steel and aluminum to wood
3
3.2 Siding applications
Ordering description
Drilling capacity range (DC)
[mm]
Thickness fastened range (MF)
[mm]
Effective range screw-in length (leff) [mm]
Screw diameter (d)
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Zinc-plated carbon steel self-drilling HEX head screws
S-MDW 51Z 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 51Z 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 51Z 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 51Z 6.5x100
0.4 2
0.4 61
30 61
6.5
S-MDW 61Z 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 61Z 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 61Z 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 61Z 6.5x100
0.4 2
0.4 61
30 61
6.5
S-MDW 71Z 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 71Z 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 71Z 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 71Z 6.5x100
0.4 2
0.4 61
30 61
6.5
41
16
61
16
81
16
101
16
41
19
61
19
81
19
101
19
41
22
61
22
81
22
101
22
Screw drive / recess type
EPDM thickness
Sales quantity
Item number
[mm]
[pc]
Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3
100
2291261
100
2291262
100
2291263
100
2291264
100
2291265
100
2291266
100
2291267
100
2291268
100
2291269
100
2291270
100
2291271
100
2291272
Reference: · More Information see approval ETA-18/0880 (Stainless steel) and ETA-20/0858 (Carbon steel)
52
www.hilti.group
3.2 Siding applications
HEX head self-drilling screws with sealing washer
S-MDW 51Z / S-MDW 61Z / S-MDW 71Z S-MDW 51C / S-MDW 61C / S-MDW 71C S-MDW 51S / S-MDW 61S / S-MDW 71S
Self-drilling screws for fastening steel and aluminum to wood
Ordering description
Drilling
Thickness Effective Screw
Screw
Washer
Screw
EPDM
Sales
Item
3
capacity
fastened
range
diameter length (L) size
drive /
thickness quantity
number
range (DC) range (MF) screw-in (d)
recess
length (leff)
type
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[pc]
Duplex-coated carbon steel self-drilling HEX head screws
S-MDW 51C 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 51C 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 51C 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 51C 6.5x100
0.4 2
0.4 61
30 61
6.5
S-MDW 61C 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 61C 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 61C 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 61C 6.5x100
0.4 2
0.4 61
30 61
6.5
S-MDW 71C 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 71C 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 71C 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 71C 6.5x100
0.4 2
0.4 61
30 61
6.5
41
16
61
16
81
16
101
16
41
19
61
19
81
19
101
19
41
22
61
22
81
22
101
22
Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3
100
2291277
100
2291278
100
2291279
100
2291280
100
2291281
100
2291282
100
2291283
100
2291284
100
2291285
100
2291286
100
2291287
100
2291288
Stainless steel (A2) self-drilling HEX head screws
S-MDW 51S 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 51S 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 51S 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 51S 6.5x100
0.4 2
0.4 61
30 61
6.5
S-MDW 61S 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 61S 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 61S 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 61S 6.5x100
0.4 2
0.4 61
30 61
6.5
S-MDW 71S 6.5x40
0.4 2
0.4 2
30 52
6.5
S-MDW 71S 6.5x60
0.4 2
0.4 21
30 52
6.5
S-MDW 71S 6.5x80
0.4 2
0.4 41
30 52
6.5
S-MDW 71S 6.5x100
0.4 2
0.4 61
30 61
6.5
41
16
61
16
81
16
101
16
41
19
61
19
81
19
101
19
41
22
61
22
81
22
101
22
Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3 Hexagon 8 3
100
2284773
100
2284774
100
2284775
100
2284776
100
2284777
100
2284778
100
2284779
100
2284780
100
2284781
100
2284782
100
2284783
100
2284770
Reference: · More Information see approval ETA-18/0880 (Stainless steel) and ETA-20/0858 (Carbon steel)
www.hilti.group
53
3.2.4.3C ountersunk head self-drilling wing tip screws
S-WD 11Z S-WD 11C / S-WD 13C / S-WD 15C
Self-drilling screws for fastening wood to metal
3
G '&
0) /
3.2 Siding applications
Single screws Ordering description
Zinc-plated carbon steel self-drilling Phillips head screws S-WD 11Z 3.8x30 S-WD 11Z 3.8x41 S-WD 11Z 3.8x57
Duplex-coated carbon steel self-drilling Phillips head screws S-WD 11C 3.8x30 S-WD 11C 3.8x41 S-WD 11C 3.8x57 S-WD 11C 4.2x25 S-WD 13C 4.8x38 S-WD 13C 5.5x50 S-WD 13C 5.5x65 S-WD 13C 5.5x85 S-WD 13C 5.5x100 S-WD 13C 6.3x70 S-WD 13C 6.3x87 S-WD 15C 5.5x65 S-WD 15C 5.5x85 S-WD 15C 5.5x119
Collated screws* Zinc-plated carbon steel self-drilling Phillips head screws S-WD 11Z 3.8x30 M S-WD 11Z 3.8x41 M
Reference: · For use with SD screwdriver and SMD 57
54
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
0.75 2.5 10 15
3.8
30
0.75 2.5 10 26
3.8
41
0.75 2.5 10 42
3.8
57
PH 2 PH 2 PH 2
1'000 500 100
413325 413326 413804
0.75 2.5 10 15
3.8
0.75 2.5 10 26
3.8
0.75 2.5 10 42
3.8
0.75 2.5 10
4.2
2.4 3.8
10 20
4.8
2.1 5.5
10 27
5.5
2.1 5.5
10 40
5.5
2.1 5.5
10 53
5.5
2.1 5.5
10 80
5.5
2.1 6
10 50
6.3
2.1 6
10 63
6.3
4 12
10 30
5.5
4 12
10 55
5.5
4 12
10 85
5.5
30
PH 2
200
416231
41
PH 2
200
416233
57
PH 2
100
416234
25
PH 2
200
283635
38
PH 3
200
283636
50
PH 3
100
283637
65
PH 3
100
283638
85
PH 3
100
283639
100
PH 3
100
287078
70
PH 3
100
416235
87
PH 3
100
416236
65
PH 3
100
287079
85
PH 3
100
287573
119
PH 3
100
289145
0.75 2.5 10 15
3.8
30
0.63 2.5 10 26
3.8
41
PH 2 PH 2
1'000 1'000
413805 413806
www.hilti.group
3.2 Siding applications
3.2.5Wafer head carbon steel self-drilling screws without sealing washer S-MD 01ZW / S-MD 03ZW / S-MD 05ZW
Carbon steel wafer head screws as fastening points in metal framing applications
3
G
'&
0)
/
G
'&
0)
/
G
'&
0)
/
Ordering description
Screw Technology
Thread type
Wafer head carbon steel self-drilling screws without sealing washer
S-MD 01ZW 5.5x19
Coarse single thread
S-MD 03ZW 5.5x25
Racing Tip
Coarse single thread
S-MD 05ZW 5.5x40
Racing Tip
Fine single thread
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
1.25 3
1.2 7.5
5.5
20
1.25 6
2.6 12
5.5
26
4.6 12
4.6 18
5.5
41
Screw drive / recess type
PH 2 PH 2 PH 3
Sales quantity
[pc]
Item number
1'000 1'000 500
408761 2264946 408763
www.hilti.group
55
3.3 Screws for light ventilated façade applications
3.3 Screws for light ventilated façade applications
3.3.1Stainless steel self-drilling screws for fastening Aluminum brackets and profiles
S-AD 01S / S-AD 01SS S-AD 01LSS / S-AD 01LHSS / S-AD 01LPSS
3
Stainless steel self-drilling screws without washer for aluminum façade fastenings
G
'& 0)
6:
/
Single Screws Ordering description
Stainless steel (A2) self-drilling HEX head screws S-AD 01S 5.5x19 Stainless steel (A4) self-drilling HEX head screws S-AD 01SS 5.5x19 S-AD 01LSS 5.5x25 Stainless steel (A4) self-drilling Phillips head screw S-AD 01LHSS 4.8x17 Stainless steel (A4) self-drilling pan head screw S-AD 01LPSS 5.5x25
Collated screws* Stainless steel (A2) self-drilling Phillips head screw S-AD 01LHS 4.8x17 M Colored stainless steel (A2) self-drilling Phillips head screws S-AD 01LHS 4.8x17 M, RAL9006 S-AD 01LHS 4.8x17 M, RAL9010 S-AD 01LHS 4.8x17 M, RAL9016
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L) [mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
1.5 4
1.5 10
5.5
19
Hexagon 8 500
2039265
1.5 4
1.5 10
5.5
19
1.5 6
3.2 12
5.5
25
Hexagon 8 500 Hexagon 8 500
2039266 2200902
1 4
0.75 8
4.8
17
PH 2
500
2127477
1.5 6
3.2 12
5.5
25
TX 25
500
2200903
0.75 4
0.75 8
4.8
17
0.75 4
0.75 8
4.8
17
0.75 4
0.75 8
4.8
17
0.75 4
0.75 8
4.8
17
PH 2
1'000
2127476
PH 2 PH 2 PH 2
1'000 1'000 1'000
2147763 2147762 2147764
Reference: · More information see National technical approval/General construction technique permission Z-14.4-769 · *For use with SD screwdriver and SMD 57 (e.g., for Alucobond systems)
56
www.hilti.group
3.3 Screws for light ventilated façade applications
3.3.2Stainless steel self-drilling screws for fastening cladding panels S-PS 01S / S-PD 01S
Stainless steel self-drilling screws without washer for fastening (OSB) panels to substructure
S-PD 01S
3
$ +
S-PS 01S
$ +
Ordering description
Base material
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Stainless steel self-drilling screws for fastening cladding panels S-PD 01S 4.0x40 S-PS 01S 4.0x40
Metal / Aluminium
Wood
0.5 2.5 0.5 2.5
0.5 12.5 4 0.5 12.5 4
Screw length (L)
[mm]
Screw drive / recess type
40
PH 2
40
PH 2
Sales quantity
[pc]
Item number
1'000 1'000
2136390 2136329
Reference: · More information see National technical approval/General construction technique permission Z-14.4-769
www.hilti.group
57
3.3 Screws for light ventilated façade applications
3.3.3Stainless steel screws for hidden fastenings of HPL panels S-HP 02SS / S-FP 01SS
Stainless steel screws for hidden HPL panel fastenings
3
$",# ,#1.,-"+" %+& )//"//*"+0+,
3333&//1"!,+
3333
"
# ! !! #
+$".&)0&
+$".&)0&
!'1/0*"+0/ ."2
/0"+". &)0&
3 +$". &)0&
/0"+". &)0&
3 +$". &)0&
#4!"-+")
HPF System
" ##$ " !"!"
Ordering description
! #
+/0))"!#/0"+".+!#&3&+$"3*-)"
S-HP 02SS 7.2x9
S-FP 01SS 5.5x32
#4!"-+")
$$"",,## ,,##11..,,--""++"" %%++&& ))////""////**""++00++,,
33333333&/&///11""!!,,++
33333333
Ad!j'u1s/t0m*e"n+t0/sc.r"e2w
Fi&x3i&n+g$s/cr.e"w2 S-FP01SS5
.5
x33
2 Br.ack(e"t0(f#i&x3e"d!-p,o&i+n0t)
""
## !! !!!! ##
1)H+a+$n$"g".e.r&H)&0)0&i<i MFT-HA
F50/RL
8 .5
2)Ha++n$$g""e..rH&)&0)i0&l&ti MFT-H 40/RL
8.5
A!!d'1'j1u//s00*t*m""+e+0n0/t/s..c""2r2ew
Han+g$e"r. Hi&l)t0i&MFT-HAF5
0/RL8.5
Fas/t0e"n+e"r. Hi&l)t0i&S-HP0
2SS7.
23x9 Ve"r.t0i&cal)p-r.o,f#i&l)e"
Br.ack(e"t0(s/l)i&d!i&n+g$-p,o&i+n0t)
Fa//s00"t"e++n""e..r H&)&i0)l0&t&iS-HP
0
2SS
7
3.32x9 Ha++n$$g""e..r H&)&i0)l0&t&iMFT-HAF
50/RL
8
.5
Han+g$e"r.p-r.o,f#i&l)e" Han+g$e"r. Hi&l)t0i&MFT-H4 0/RL8.5
Fas/t0e"n+e"r. Hi&l)t0i&S-HP0
2SS7.
23x9
HPL##fa44ça!!"d"e--p+a+""n))el "" ####$$ "" !!""!!""
Drilling capacity range (DC) #[ mm ]
Self-tapping
1.5 4
Screw diameter (d) [mm]
7.2
5.5
Screw length (L)
[mm] 9
Screw drive/ recess type
TX 25 HF
32
TX 25 HF
Fa/s/0t0"e"+n+"e".r. H&i)&l0)t0&i&S-HP0
2SS7
.323x9 Ha+n+$g$"e".r. H&i)&l0)t0&i&MFT-H 40/RL8
.5 HPL#f#a4ç4a!!d""e--pa++n"")e)l
!!'1'1//00**""++00// ..""22
&3&3&+&+$$// ..""22
33
.. ((""00##&3&3""!!--,,&+&+00
Sales
Item
quan&)&t0)+0&i+&t$$y""..nu
mber
[pc]//00""++"".. 500 &)&0)0&&
2301
03349
""..00&& ))--..,,##&)&")" 100.. ((""00//)&)!&!&+&2+$3$0--1,,1&+&+0002
++$$""..--..,,##&)&")"
++$$""..
&)&0)0&&
Reference:
//00""++""..
·
Each sales package HPL façade panels
of
S-HP
02SS
7.2x9
includes
a
torque-limiting
bit
holder
(S-BH
QC
64/2.5"
TL)
which
must
be
used
when
fastenin g&)&0) 0&&hange
rsto
33
· If HPL panels are not pre-drilled, stepped drill bit TS-HP 5,9-90 HPL (#2301100) must be used. (See accessories for Hidden panel fastenings,
chapter 4.3)
· More information, see approval ETA-21/0567
!! ##
58
++//00))")"!!##//00""++""..++!!##&3&3&+&+$$""33**--)")"
##
www.hilti.group
3.4 Screws for sandwich applications
3.4 Screws for sandwich applications 3.4.1HEX head stainless steel self-drilling screws
for light and medium steel substructure S-CD 53S / S-CD 63S / S-CD 73S (Ø16/Ø19/Ø22)
The self-drilling sandwich panel screws for fastening on light and medium base materials 3
$
G
'&
6:
PLQ0) PD[0) /
Ordering description
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Stainless steel (A2) sandwich panel screw S-CD 53S
S-CD 53S 5.5x76
2 6
S-CD 53S 5.5x86
2 6
S-CD 53S 5.5x96
2 6
S-CD 53S 5.5x116
2 6
S-CD 53S 5.5x136
2 6
S-CD 53S 5.5x156
2 6
S-CD 53S 5.5x172
2 6
S-CD 53S 5.5x186
2 6
S-CD 53S 5.5x216
2 6
S-CD 53S 5.5x234
2 6
S-CD 53S 5.5x256
2 6
S-CD 53S 5.5x286
2 6
38 48
5.5
48 58
5.5
58 68
5.5
68 88
5.5
78 108
5.5
98 128
5.5
114 144 5.5
128 158 5.5
138 188 5.5
156 206 5.5
178 228 5.5
208 258 5.5
76
16
86
16
96
16
116
16
136
16
156
16
172
16
186
16
216
16
234
16
256
16
286
16
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 100
413394
3
Hexagon 8 100
413395
3
Hexagon 8 100
413396
3
Hexagon 8 100
413389
3
Hexagon 8 100
413390
3
Hexagon 8 100
413391
3
Hexagon 8 100
2132343
3
Hexagon 8 100
413392
3
Hexagon 8 100
413393
3
Hexagon 8 100
2132344
3
Hexagon 8 100
413397
3
Hexagon 8 100
413398
Reference: · More Information see approval ETA-13/0179
www.hilti.group
59
3.4 Screws for sandwich applications
HEX head stainless steel self-drilling screws for light and medium steel substructure
S-CD 53S / S-CD 63S / S-CD 73S (Ø16/Ø19/Ø22)
The self-drilling sandwich panel screws for fastening on light and medium base materials
Ordering description
3
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Stainless steel (A2) sandwich panel screw S-CD 63S
S-CD 63S 5.5x76
2 6
S-CD 63S 5.5x86
2 6
S-CD 63S 5.5x96
2 6
S-CD 63S 5.5x116
2 6
S-CD 63S 5.5x136
2 6
S-CD 63S 5.5x156
2 6
S-CD 63S 5.5x172
2 6
S-CD 63S 5.5x186
2 6
S-CD 63S 5.5x216
2 6
S-CD 63S 5.5x234
2 6
S-CD 63S 5.5x256
2 6
S-CD 63S 5.5x286
2 6
38 48
5.5
48 58
5.5
58 68
5.5
68 88
5.5
78 108
5.5
98 128
5.5
114 144 5.5
128 158 5.5
138 188 5.5
156 206 5.5
178 228 5.5
208 258 5.5
76
19
86
19
96
19
116
19
136
19
156
19
172
19
186
19
216
19
234
19
256
19
286
19
Stainless steel (A2) sandwich panel screw S-CD 73S
S-CD 73S 5.5x76
2 6
S-CD 73S 5.5x86
2 6
S-CD 73S 5.5x96
2 6
S-CD 73S 5.5x116
2 6
S-CD 73S 5.5x136
2 6
S-CD 73S 5.5x156
2 6
S-CD 73S 5.5x172
2 6
S-CD 73S 5.5x186
2 6
S-CD 73S 5.5x216
2 6
S-CD 73S 5.5x234
2 6
S-CD 73S 5.5x256
2 6
S-CD 73S 5.5x286
2 6
38 48
5.5
48 58
5.5
58 68
5.5
68 88
5.5
78 108
5.5
98 128
5.5
114 144 5.5
128 158 5.5
138 188 5.5
156 206 5.5
178 228 5.5
208 258 5.5
76
22
86
22
96
22
116
22
136
22
156
22
172
22
186
22
216
22
234
22
256
22
286
22
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 100
413354
3
Hexagon 8 100
413355
3
Hexagon 8 100
413356
3
Hexagon 8 100
413349
3
Hexagon 8 100
413350
3
Hexagon 8 100
413351
3
Hexagon 8 100
2132345
3
Hexagon 8 100
413352
3
Hexagon 8 100
413353
3
Hexagon 8 100
2132346
3
Hexagon 8 100
413357
3
Hexagon 8 100
413358
3
Hexagon 8 100
413374
3
Hexagon 8 100
413375
3
Hexagon 8 100
413376
3
Hexagon 8 100
413369
3
Hexagon 8 100
413370
3
Hexagon 8 100
413371
3
Hexagon 8 100
2132347
3
Hexagon 8 100
413372
3
Hexagon 8 100
413373
3
Hexagon 8 100
2132348
3
Hexagon 8 100
413377
3
Hexagon 8 100
413378
Reference: · More Information see approval ETA-13/0179
60
www.hilti.group
3.4.2HEX head carbon steel self-drilling screws for light and medium steel substructure
S-CD 53C/S-CD 63C (Ø16/Ø19)
The self-drilling panel screws for fastening on light and medium base materials
G
'& 6:
PLQ0) PD[0) /
3.4 Screws for sandwich applications
3
Ordering description
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Duplex coated carbon steel sandwich panel screw S-CD 53C
S-CD 53C 5.5x76
2 6
S-CD 53C 5.5x86
2 6
S-CD 53C 5.5x96
2 6
S-CD 53C 5.5x116
2 6
S-CD 53C 5.5x136
2 6
S-CD 53C 5.5x156
2 6
S-CD 53C 5.5x186
2 6
S-CD 53C 5.5x216
2 6
S-CD 53C 5.5x256
2 6
S-CD 53C 5.5x286
2 6
38 48
5.5
48 58
5.5
58 68
5.5
68 88
5.5
78 108
5.5
98 128
5.5
128 158 5.5
138 188 5.5
178 228 5.5
208 258 5.5
76
16
86
16
96
16
116
16
136
16
156
16
186
16
216
16
256
16
286
16
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 100
2025960
3
Hexagon 8 100
2025961
3
Hexagon 8 100
2025962
3
Hexagon 8 100
2025963
3
Hexagon 8 100
2025964
3
Hexagon 8 100
2025965
3
Hexagon 8 100
2025966
3
Hexagon 8 100
2025967
3
Hexagon 8 100
2025968
3
Hexagon 8 100
2025969
Reference: · More information see approval ETA-13/0179
www.hilti.group
61
3.4 Screws for sandwich applications
HEX head carbon steel self-drilling screws for light and medium steel substructure
S-CD 53C/S-CD 63C (Ø16/Ø19)
The self-drilling panel screws for fastening on light and medium base materials
Ordering description
3
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Duplex coated carbon steel sandwich panel screw S-CD 63C
S-CD 63C 5.5x76
2 6
S-CD 63C 5.5x86
2 6
S-CD 63C 5.5x96
2 6
S-CD 63C 5.5x116
2 6
S-CD 63C 5.5x136
2 6
S-CD 63C 5.5x156
2 6
S-CD 63C 5.5x186
2 6
S-CD 63C 5.5x216
2 6
S-CD 63C 5.5x256
2 6
S-CD 63C 5.5x286
2 6
38 48
5.5
48 58
5.5
58 68
5.5
68 88
5.5
78 108
5.5
98 128
5.5
128 158 5.5
138 188 5.5
178 228 5.5
208 258 5.5
76
19
86
19
96
19
116
19
136
19
156
19
186
19
216
19
256
19
286
19
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 100
413344
3
Hexagon 8 100
413345
3
Hexagon 8 100
413346
3
Hexagon 8 100
413339
3
Hexagon 8 100
413340
3
Hexagon 8 100
413341
3
Hexagon 8 100
413342
3
Hexagon 8 100
413343
3
Hexagon 8 100
413347
3
Hexagon 8 100
413348
Reference: · More information see approval ETA-13/0179
62
www.hilti.group
3.4.3HEX head stainless steel self-drilling screws for thick steel substructure with twisted drill tip
S-CD 55GS / S-CD 65GS / S-CD 75GS
The self-drilling sandwich panel screws for thick base materials
3.4 Screws for sandwich applications
3
Ordering description
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Stainless steel (A2) sandwich panel screw S-CD 55GS
S-CD 55GS 5.5x88
4 15
S-CD 55GS 5.5x108
4 15
S-CD 55GS 5.5x128
4 15
S-CD 55GS 5.5x148
4 15
S-CD 55GS 5.5x168
4 15
S-CD 55GS 5.5x183
4 15
S-CD 55GS 5.5x198
4 15
S-CD 55GS 5.5x223
4 15
S-CD 55GS 5.5x248
4 15
25 46
5.5
35 66
5.5
55 86
5.5
75 106
5.5
95 126
5.5
115 141 5.5
130 156 5.5
145 181 5.5
170 206 5.5
88
16
108
16
128
16
148
16
168
16
183
16
198
16
223
16
248
16
Stainless steel (A2) sandwich panel screw S-CD 65GS
S-CD 65GS 5.5x88
4 15
S-CD 65GS 5.5x108
4 15
S-CD 65GS 5.5x128
4 15
S-CD 65GS 5.5x148
4 15
S-CD 65GS 5.5x168
4 15
S-CD 65GS 5.5x183
4 15
S-CD 65GS 5.5x198
4 15
S-CD 65GS 5.5x223
4 15
S-CD 65GS 5.5x248
4 15
25 46
5.5
35 66
5.5
55 86
5.5
75 106
5.5
95 126
5.5
115 141 5.5
130 156 5.5
145 181 5.5
170 206 5.5
88
19
108
19
128
19
148
19
168
19
183
19
198
19
223
19
248
19
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 100
2109048
3
Hexagon 8 100
2109049
3
Hexagon 8 100
2109050
3
Hexagon 8 100
2109051
3
Hexagon 8 100
2109052
3
Hexagon 8 100
2109053
3
Hexagon 8 100
2109054
3
Hexagon 8 100
2109055
3
Hexagon 8 100
2109056
3
Hexagon 8 100
2108776
3
Hexagon 8 100
2108777
3
Hexagon 8 100
2108778
3
Hexagon 8 100
2108779
3
Hexagon 8 100
2109040
3
Hexagon 8 100
2109041
3
Hexagon 8 100
2109042
3
Hexagon 8 100
2109043
3
Hexagon 8 100
2109044
Reference: · More Information see approval ETA-13/0179
www.hilti.group
63
3.4 Screws for sandwich applications
HEX head stainless steel self-drilling screws for thick steel substructure with twisted drill tip
S-CD 55GS / S-CD 65GS / S-CD 75GS
The self-drilling sandwich panel screws for thick base materials
Ordering description
3
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Stainless steel (A2) sandwich panel screw S-CD 75GS
S-CD 75GS 5.5x88
4 15
S-CD 75GS 5.5x108
4 15
S-CD 75GS 5.5x128
4 15
S-CD 75GS 5.5x148
4 15
S-CD 75GS 5.5x168
4 15
S-CD 75GS 5.5x183
4 15
S-CD 75GS 5.5x198
4 15
S-CD 75GS 5.5x223
4 15
S-CD 75GS 5.5x248
4 15
25 46
5.5
35 66
5.5
55 86
5.5
75 106
5.5
95 126
5.5
115 141 5.5
130 156 5.5
145 181 5.5
170 206 5.5
88
22
108
22
128
22
148
22
168
22
183
22
198
22
223
22
248
22
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 100
2109060
3
Hexagon 8 100
2109061
3
Hexagon 8 100
2109062
3
Hexagon 8 100
2109063
3
Hexagon 8 100
2109064
3
Hexagon 8 100
2109065
3
Hexagon 8 100
2109066
3
Hexagon 8 100
2109067
3
Hexagon 8 100
2109068
64
www.hilti.group
3.4.4HEX head stainless steel self-drilling screws for thick steel substructure
S-CD 55S / S-CD 65S / S-CD 75S (Ø16/Ø19/Ø22)
The self-drilling sandwich panel screws for thick base materials
$
G
'& 6:
PLQ0) PD[0) /
3.4 Screws for sandwich applications
3
Ordering description
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size [mm]
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Stainless steel (A2) sandwich panel screw S-CD 55S
S-CD 55S 5.5x90
3.5 12
22 45
5.5
90
16
3
S-CD 55S 5.5x100
3.5 12
32 55
5.5
100
16
3
S-CD 55S 5.5x110
3.5 12
42 65
5.5
110
16
3
S-CD 55S 5.5x130
3.5 12
62 85
5.5
130
16
3
S-CD 55S 5.5x150
3.5 12
82 105
5.5
150
16
3
S-CD 55S 5.5x170
3.5 12
102 125 5.5
170
16
3
S-CD 55S 5.5x190
3.5 12
122 145 5.5
190
16
3
S-CD 55S 5.5x220
3.5 12
137 175 5.5
220
16
3
Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100
Stainless steel (A2) sandwich panel screw S-CD 65S
S-CD 65S 5.5x90
3.5 12
22 45
5.5
90
19
3
S-CD 65S 5.5x100
3.5 12
32 55
5.5
100
19
3
S-CD 65S 5.5x110
3.5 12
42 65
5.5
110
19
3
S-CD 65S 5.5x130
3.5 12
62 85
5.5
130
19
3
S-CD 65S 5.5x150
3.5 12
82 105
5.5
150
19
3
S-CD 65S 5.5x170
3.5 12
102 125 5.5
170
19
3
S-CD 65S 5.5x190
3.5 12
122 145 5.5
190
19
3
S-CD 65S 5.5x220
3.5 12
137 175 5.5
220
19
3
Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100
Item number
2038154 2038155 2038156 2038157 2038158 2038159 2038270 2038271
375250 375251 375252 375253 375254 375255 284544 284545
Reference: · More Information see approval ETA-13/0179
www.hilti.group
65
3.4 Screws for sandwich applications
HEX head stainless steel self-drilling screws for thick steel substructure
S-CD 55S / S-CD 65S / S-CD 75S (Ø16/Ø19/Ø22)
The self-drilling sandwich panel screws for thick base materials
Ordering description
3
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size [mm]
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Stainless steel (A2) sandwich panel screw S-CD 75S
S-CD 75S 5.5x90
3.5 12
22 45
5.5
90
22
3
S-CD 75S 5.5x100
3.5 12
32 55
5.5
100
22
3
S-CD 75S 5.5x110
3.5 12
42 65
5.5
110
22
3
S-CD 75S 5.5x130
3.5 12
62 85
5.5
130
22
3
S-CD 75S 5.5x150
3.5 12
82 105
5.5
150
22
3
S-CD 75S 5.5x170
3.5 12
102 125 5.5
170
22
3
S-CD 75S 5.5x190
3.5 12
122 145 5.5
190
22
3
S-CD 75S 5.5x220
3.5 12
137 175 5.5
220
22
3
Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100
Item number
285650 285651 285652 285653 285654 285655 285656 285657
Reference: · More Information see approval ETA-13/0179
66
www.hilti.group
3.4.5HEX head carbon steel self-drilling screws for thick steel substructure
S-CD 55C/S-CD 65C (Ø16/Ø19)
The self-drilling sandwich panel screws for thick base materials
G '&
6:
PLQ0) PD[0) /
3.4 Screws for sandwich applications
3
Ordering description
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
Duplex-coated carbon steel sandwich panel screw S-CD 55C
S-CD 55C 5.5x108
3.5 15
S-CD 55C 5.5x128
3.5 15
S-CD 55C 5.5x148
3.5 15
S-CD 55C 5.5x168
3.5 15
S-CD 55C 5.5x198
3.5 15
S-CD 55C 5.5x228
3.5 15
S-CD 55C 5.5x268
3.5 15
S-CD 55C 5.5x298
3.5 15
58 68
5.5
68 88
5.5
78 108
5.5
98 128
5.5
128 158 5.5
138 188 5.5
178 228 5.5
208 258 5.5
108
16
128
16
148
16
168
16
198
16
228
16
268
16
298
16
Duplex-coated carbon steel sandwich panel screw S-CD 65C
S-CD 65C 5.5x108
3.5 15
S-CD 65C 5.5x128
3.5 15
S-CD 65C 5.5x148
3.5 15
S-CD 65C 5.5x168
3.5 15
S-CD 65C 5.5x198
3.5 15
S-CD 65C 5.5x228
3.5 15
S-CD 65C 5.5x268
3.5 15
S-CD 65C 5.5x298
3.5 15
58 68
5.5
68 88
5.5
78 108
5.5
98 128
5.5
128 158 5.5
138 188 5.5
178 228 5.5
208 258 5.5
108
19
128
19
148
19
168
19
198
19
228
19
268
19
298
19
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 100
2025476
3
Hexagon 8 100
2025477
3
Hexagon 8 100
2025478
3
Hexagon 8 100
2025479
3
Hexagon 8 100
2025950
3
Hexagon 8 100
2025951
3
Hexagon 8 100
2025952
3
Hexagon 8 100
2025953
3
Hexagon 8 100
414185
3
Hexagon 8 100
414186
3
Hexagon 8 100
414187
3
Hexagon 8 100
290389
3
Hexagon 8 100
290390
3
Hexagon 8 100
290391
3
Hexagon 8 100
290392
3
Hexagon 8 100
414289
Reference: · More information see approval ETA-13/0179
www.hilti.group
67
3.4 Screws for sandwich applications
3.4.6HEX head stainless steel self-drilling screws for wood base materials
S-CDW 51S / S-CDW 61S / S-CDW 71S (Ø16 / Ø19 / Ø22)
The self-drilling sandwich panel screw for fastening on wood base materials
3
$
G
'& 6:
PLQ0) PD[0) /
Ordering description
Minimum thickness of base material [mm]
Thickness fastened range (MF)
Screw diameter (d)
[mm]
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Stainless steel (A2) sandwich panel screw S-CDW 51S
S-CDW 51S 6.5x100
0.50 (Wood) 27 47
6.5
S-CDW 51S 6.5x110
0.50 (Wood) 37 57
6.5
S-CDW 51S 6.5x120
0.50 (Wood) 47 67
6.5
S-CDW 51S 6.5x140
0.50 (Wood) 67 87
6.5
S-CDW 51S 6.5x160
0.50 (Wood) 87 107
6.5
S-CDW 51S 6.5x180
0.50 (Wood) 107 127 6.5
S-CDW 51S 6.5x200
0.50 (Wood) 127 147 6.5
S-CDW 51S 6.5x220
0.50 (Wood) 147 167 6.5
S-CDW 51S 6.5x230
0.50 (Wood) 157 177 6.5
100
16
110
16
120
16
140
16
160
16
180
16
200
16
220
16
230
16
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
3
Hexagon 8 100
272531
3
Hexagon 8 100
272532
3
Hexagon 8 100
272533
3
Hexagon 8 100
272534
3
Hexagon 8 100
272535
3
Hexagon 8 100
272536
3
Hexagon 8 100
272537
3
Hexagon 8 100
272538
3
Hexagon 8 100
272539
Reference: · More Information see approval ETA-13/0179
68
www.hilti.group
3.4 Screws for sandwich applications
HEX head stainless steel self-drilling screws for wood base materials
S-CDW 51S / S-CDW 61S / S-CDW 71S (Ø16 / Ø19 / Ø22)
The self-drilling sandwich panel screw for fastening on wood base materials
Ordering description
Minimum Thickness Screw
Screw
Washer
EPDM-
Screw
Sales
Item
thickness of base
fastened diameter range (MF) (d)
length (L) size
thickness
drive / recess
quantity
number
3
material
type
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[pc]
Stainless steel (A2) sandwich panel screw S-CDW 61S
S-CDW 61S 6.5x100
0.50 (Wood) 27 47
6.5
100
19
3
S-CDW 61S 6.5x110
0.50 (Wood) 37 57
6.5
110
19
3
S-CDW 61S 6.5x120
0.50 (Wood) 47 67
6.5
120
19
3
S-CDW 61S 6.5x140
0.50 (Wood) 67 87
6.5
140
19
3
S-CDW 61S 6.5x160
0.50 (Wood) 87 107
6.5
160
19
3
S-CDW 61S 6.5x180
0.50 (Wood) 107 127 6.5
180
19
3
S-CDW 61S 6.5x200
0.50 (Wood) 127 147 6.5
200
19
3
S-CDW 61S 6.5x220
0.50 (Wood) 147 167 6.5
220
19
3
S-CDW 61S 6.5x230
0.50 (Wood) 157 177 6.5
230
19
3
Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100
375256 375257 375258 375259 375260 375261 284540 284541 284597
Stainless steel (A2) sandwich panel screw S-CDW 71S
S-CDW 71S 6.5x100
0.50 (Wood) 27 47
6.5
100
22
3
S-CDW 71S 6.5x110
0.50 (Wood) 37 57
6.5
110
22
3
S-CDW 71S 6.5x120
0.50 (Wood) 47 67
6.5
120
22
3
S-CDW 71S 6.5x140
0.50 (Wood) 67 87
6.5
140
22
3
S-CDW 71S 6.5x160
0.50 (Wood) 87 107
6.5
160
22
3
S-CDW 71S 6.5x180
0.50 (Wood) 107 127 6.5
180
22
3
S-CDW 71S 6.5x200
0.50 (Wood) 127 147 6.5
200
22
3
S-CDW 71S 6.5x220
0.50 (Wood) 147 167 6.5
220
22
3
S-CDW 71S 6.5x230
0.50 (Wood) 157 177 6.5
230
22
3
Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100
285658 285659 285660 285661 285662 285663 285664 285665 285666
Reference: · More Information see approval ETA-13/0179
www.hilti.group
69
3.4.7HEX head carbon steel self-drilling screws for wood base materials
S-CDW 61C
The sandwich panel screw for fastening on wood base materials
3
G '&
6:
PLQ0) PD[0) /
3.4 Screws for sandwich applications
Ordering description
Minimum thickness of base material [mm]
Thickness fastened range (MF)
Screw diameter (d)
[mm]
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Duplex coated sandwich panel screw S-CDW 61C S-CDW 61C 6.5x100 S-CDW 61C 6.5x120 S-CDW 61C 6.5x140 S-CDW 61C 6.5x160 S-CDW 61C 6.5x180 S-CDW 61C 6.5x200 S-CDW 61C 6.5x220 S-CDW 61C 6.5x230
0.4 2 0.4 2 0.4 2 0.4 2 0.4 2 0.4 2 0.4 2 0.4 2
27 47
6.5
47 67
6.5
67 87
6.5
87 107
6.5
107 127 6.5
127 147 6.5
147 167 6.5
157 177 6.5
100
19
120
19
140
19
160
19
180
19
200
19
220
19
230
19
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
3
Hexagon 8 100
206981
3
Hexagon 8 100
206983
3
Hexagon 8 100
206984
3
Hexagon 8 100
206985
3
Hexagon 8 100
206986
3
Hexagon 8 100
206987
3
Hexagon 8 100
206988
3
Hexagon 8 100
206989
70
www.hilti.group
3.5 Structural self-tapping screws
3.5 Structural self-tapping screws 3.5.1 Stainless steel self-tapping screws for thick base materials
S-MP 52S / S-MP 62S / S-MP 72S
The universal monobloc self-tapping screw for thick base materials 3
$
G
6:
0) /
Ordering description
Minimum thickness of base material [mm]
Thickness fastened range (MF) steel [mm]
Screw diameter (d)
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Stainless steel (A2) self-tapping screw S-MP 52S
S-MP 52S 6.3x50
1.25 (Steel) 26 37
6.3
S-MP 52S 6.3x64
1.25 (Steel) 40 51
6.3
S-MP 52S 6.3x75
1.25 (Steel) 51 62
6.3
S-MP 52S 6.3x82
1.25 (Steel) 58 69
6.3
S-MP 52S 6.3x92
1.25 (Steel) 68 79
6.3
S-MP 52S 6.3x102
1.25 (Steel) 78 89
6.3
S-MP 52S 6.3x115
1.25 (Steel) 91 102
6.3
S-MP 52S 6.3x125
1.25 (Steel) 101 112 6.3
S-MP 52S 6.3x135
1.25 (Steel) 111 122 6.3
S-MP 52S 6.3x142
1.25 (Steel) 118 129 6.3
S-MP 52S 6.3x152
1.25 (Steel) 128 139 6.3
S-MP 52S 6.3x162
1.25 (Steel) 138 149 6.3
S-MP 52S 6.3x167
1.25 (Steel) 143 154 6.3
S-MP 52S 6.3x175
1.25 (Steel) 151 162 6.3
S-MP 52S 6.3x190
1.25 (Steel) 166 177 6.3
S-MP 52S 6.3x200
1.25 (Steel) 176 187 6.3
50
16
64
16
75
16
82
16
92
16
102
16
115
16
125
16
135
16
142
16
152
16
162
16
167
16
175
16
190
16
200
16
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
3
Hexagon 8 200
2125104
3
Hexagon 8 100
2125105
3
Hexagon 8 100
2125106
3
Hexagon 8 100
2125107
3
Hexagon 8 100
2125108
3
Hexagon 8 100
2125109
3
Hexagon 8 100
2125150
3
Hexagon 8 100
2125151
3
Hexagon 8 100
2125152
3
Hexagon 8 100
2125153
3
Hexagon 8 100
2125154
3
Hexagon 8 100
2125155
3
Hexagon 8 100
2126596
3
Hexagon 8 100
2125156
3
Hexagon 8 100
2125157
3
Hexagon 8 100
2125158
www.hilti.group
71
3.5 Structural self-tapping screws
Stainless steel self-tapping screws for thick base materials S-MP 52S / S-MP 62S / S-MP 72S
The universal monobloc self-tapping screw for thick base materials
Ordering description
3
Minimum thickness of base material [mm]
Thickness fastened range (MF) steel [mm]
Screw diameter (d)
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Stainless steel (A2) self-tapping screw S-MP 62S
S-MP 62S 6.3x50
1.25 (Steel) 26 37
6.3
S-MP 62S 6.3x64
1.25 (Steel) 40 51
6.3
S-MP 62S 6.3x75
1.25 (Steel) 51 62
6.3
S-MP 62S 6.3x82
1.25 (Steel) 58 69
6.3
S-MP 62S 6.3x92
1.25 (Steel) 68 79
6.3
S-MP 62S 6.3x102
1.25 (Steel) 78 89
6.3
S-MP 62S 6.3x115
1.25 (Steel) 91 102
6.3
S-MP 62S 6.3x125
1.25 (Steel) 101 112 6.3
S-MP 62S 6.3x135
1.25 (Steel) 111 122 6.3
S-MP 62S 6.3x142
1.25 (Steel) 118 129 6.3
S-MP 62S 6.3x152
1.25 (Steel) 128 139 6.3
S-MP 62S 6.3x162
1.25 (Steel) 138 149 6.3
S-MP 62S 6.3x167
1.25 (Steel) 143 154 6.3
S-MP 62S 6.3x175
1.25 (Steel) 151 162 6.3
S-MP 62S 6.3x190
1.25 (Steel) 166 177 6.3
S-MP 62S 6.3x200
1.25 (Steel) 176 187 6.3
50
19
64
19
75
19
82
19
92
19
102
19
115
19
125
19
135
19
142
19
152
19
162
19
167
19
175
19
190
19
200
19
Stainless steel (A2) self-tapping screw S-MP 72S
S-MP 72S 6.3x50
1.25 (Steel) 26 37
6.3
S-MP 72S 6.3x64
1.25 (Steel) 40 51
6.3
S-MP 72S 6.3x75
1.25 (Steel) 51 62
6.3
S-MP 72S 6.3x82
1.25 (Steel) 58 69
6.3
S-MP 72S 6.3x92
1.25 (Steel) 68 79
6.3
S-MP 72S 6.3x102
1.25 (Steel) 78 89
6.3
S-MP 72S 6.3x115
1.25 (Steel) 91 102
6.3
S-MP 72S 6.3x125
1.25 (Steel) 101 112 6.3
S-MP 72S 6.3x135
1.25 (Steel) 111 122 6.3
S-MP 72S 6.3x142
1.25 (Steel) 118 129 6.3
S-MP 72S 6.3x152
1.25 (Steel) 128 139 6.3
S-MP 72S 6.3x162
1.25 (Steel) 138 149 6.3
S-MP 72S 6.3x167
1.25 (Steel) 143 154 6.3
S-MP 72S 6.3x175
1.25 (Steel) 151 162 6.3
S-MP 72S 6.3x190
1.25 (Steel) 166 177 6.3
S-MP 72S 6.3x200
1.25 (Steel) 176 187 6.3
50
22
64
22
75
22
82
22
92
22
102
22
115
22
125
22
135
22
142
22
152
22
162
22
167
22
175
22
190
22
200
22
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
3
Hexagon 8 200
2125159
3
Hexagon 8 100
2125160
3
Hexagon 8 100
2125161
3
Hexagon 8 100
2125162
3
Hexagon 8 100
2125163
3
Hexagon 8 100
2125164
3
Hexagon 8 100
2125165
3
Hexagon 8 100
2125166
3
Hexagon 8 100
2125167
3
Hexagon 8 100
2125168
3
Hexagon 8 100
2125169
3
Hexagon 8 100
2125170
3
Hexagon 8 100
2126597
3
Hexagon 8 100
2125171
3
Hexagon 8 100
2125172
3
Hexagon 8 100
2125173
3
Hexagon 8 200
2125174
3
Hexagon 8 100
2125175
3
Hexagon 8 100
2125176
3
Hexagon 8 100
2125177
3
Hexagon 8 100
2125178
3
Hexagon 8 100
2125179
3
Hexagon 8 100
2125180
3
Hexagon 8 100
2125181
3
Hexagon 8 100
2125182
3
Hexagon 8 100
2125183
3
Hexagon 8 100
2125184
3
Hexagon 8 100
2125185
3
Hexagon 8 100
2126598
3
Hexagon 8 100
2125186
3
Hexagon 8 100
2125187
3
Hexagon 8 100
2125188
Recommended pre-drill diameter for tII tII/mm (Steel) 1.25 1.5 1.6 4.0 4.1 6.9 7.0
Pre-drill-Ø [mm] 5.0 5.3 5.5 5.7
Reference: · More information see approval ETA-13/0179 and ETA-18/0880
72
www.hilti.group
3.5 Structural self-tapping screws
3.5.2 Stainless steel self-tapping screws for thick base materials S-MP 54S / S-MP 64S / S-MP 74S
The universal bi-metal self-tapping screw for thick base materials
3
$
G
6:
0) /
Ordering description
Minimum thickness of base material [mm]
Thickness fastened range (MF)
Screw diameter (d)
[mm]
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Stainless steel (A2) self-tapping screw S-MP 54S
S-MP 54S 6.3x22
1.25 (Steel) 1.9 9
6.3
S-MP 54S 6.3x25
1.25 (Steel) 1.9 12
6.3
S-MP 54S 6.3x32
1.25 (Steel) 1.9 19
6.3
S-MP 54S 6.3x38
1.25 (Steel) 1.9 25
6.3
S-MP 54S 6.3x50
1.25 (Steel) 1.9 37
6.3
S-MP 54S 6.3x63
1.25 (Steel) 1.9 50
6.3
S-MP 54S 6.3x75
1.25 (Steel) 1.9 62
6.3
S-MP 54S 6.3x88
1.25 (Steel) 1.9 75
6.3
S-MP 54S 6.3x100
1.25 (Steel) 1.9 87
6.3
S-MP 54S 6.3x125
1.25 (Steel) 1.9 112
6.3
S-MP 54S 6.3x150
1.25 (Steel) 1.9 138
6.3
S-MP 54S 6.3x175
1.25 (Steel) 1.9 162
6.3
S-MP 54S 6.3x200
1.25 (Steel) 1.9 187
6.3
S-MP 54S 6.3x225
1.25 (Steel) 1.9 212
6.3
S-MP 54S 6.3x250
1.25 (Steel) 1.9 237
6.3
S-MP 54S 6.3x275
1.25 (Steel) 1.9 262
6.3
22
16
25
16
32
16
38
16
50
16
63
16
75
16
88
16
100
16
125
16
150
16
175
16
200
16
225
16
250
16
275
16
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
3
Hexagon 8 500
244214
3
Hexagon 8 500
283199
3
Hexagon 8 250
283200
3
Hexagon 8 250
283201
3
Hexagon 8 250
283202
3
Hexagon 8 100
283203
3
Hexagon 8 100
283204
3
Hexagon 8 100
283205
3
Hexagon 8 100
283206
3
Hexagon 8 100
283241
3
Hexagon 8 100
283536
3
Hexagon 8 100
283537
3
Hexagon 8 100
403179
3
Hexagon 8 100
403180
3
Hexagon 8 100
403181
3
Hexagon 8 100
403182
Reference: · More information see approval ETA-13/0179 and ETA-18/0880
www.hilti.group
73
3.5 Structural self-tapping screws
Stainless steel self-tapping screws for thick base materials S-MP 54S / S-MP 64S / S-MP 74S
The universal bi-metal self-tapping screw for thick base materials
Ordering description
3
S-MP 64S 6.3x22 S-MP 64S 6.3x25 S-MP 64S 6.3x32 S-MP 64S 6.3x38 S-MP 64S 6.3x50 S-MP 64S 6.3x63 S-MP 64S 6.3x75 S-MP 64S 6.3x88 S-MP 64S 6.3x100 S-MP 64S 6.3x125 S-MP 64S 6.3x150 S-MP 64S 6.3x175 S-MP 64S 6.3x200 S-MP 64S 6.3x225 S-MP 64S 6.3x250 S-MP 64S 6.3x275
S-MP 74S 6.3x22 S-MP 74S 6.3x25 S-MP 74S 6.3x32 S-MP 74S 6.3x38 S-MP 74S 6.3x50 S-MP 74S 6.3x63 S-MP 74S 6.3x75 S-MP 74S 6.3x88 S-MP 74S 6.3x100 S-MP 74S 6.3x125 S-MP 74S 6.3x150 S-MP 74S 6.3x175 S-MP 74S 6.3x200 S-MP 74S 6.3x225 S-MP 74S 6.3x250 S-MP 74S 6.3x275
Recommended pre-drill diameter for tII tII/mm (Steel) 1.5 1.5 4.0 4.1 7.0 7.0
Minimum thickness of base material [mm]
Thickness fastened range (MF)
Screw diameter (d)
[mm]
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Stainless steel (A2) self-tapping screw S-MP 64S
1.25 (Steel) 1.9 9
6.3
22
19
1.25 (Steel) 1.9 12
6.3
25
19
1.25 (Steel) 1.9 19
6.3
32
19
1.25 (Steel) 1.9 25
6.3
38
19
1.25 (Steel) 1.9 37
6.3
50
19
1.25 (Steel) 1.9 50
6.3
63
19
1.25 (Steel) 1.9 62
6.3
75
19
1.25 (Steel) 1.9 75
6.3
88
19
1.25 (Steel) 1.9 87
6.3
100
19
1.25 (Steel) 1.9 112
6.3
125
19
1.25 (Steel) 1.9 138
6.3
150
19
1.25 (Steel) 1.9 162
6.3
175
19
1.25 (Steel) 1.9 187
6.3
200
19
1.25 (Steel) 1.9 212
6.3
225
19
1.25 (Steel) 1.9 237
6.3
250
19
1.25 (Steel) 1.9 262 6.3
275
19
Stainless steel (A2) self-tapping screw S-MP 74S
1.25 (Steel) 1.9 9
6.3
22
19
1.25 (Steel) 1.9 12
6.3
25
19
1.25 (Steel) 1.9 19
6.3
32
19
1.25 (Steel) 1.9 25
6.3
38
19
1.25 (Steel) 1.9 37
6.3
50
19
1.25 (Steel) 1.9 50
6.3
63
19
1.25 (Steel) 1.9 62
6.3
75
19
1.25 (Steel) 1.9 75
6.3
88
19
1.25 (Steel) 1.9 87
6.3
100
19
1.25 (Steel) 1.9 112
6.3
125
19
1.25 (Steel) 1.9 138
6.3
150
19
1.25 (Steel) 1.9 162
6.3
175
19
1.25 (Steel) 1.9 187
6.3
200
19
1.25 (Steel) 1.9 212
6.3
225
19
1.25 (Steel) 1.9 237
6.3
250
19
1.25 (Steel) 1.9 262
6.3
275
19
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
3
Hexagon 8 500
283538
3
Hexagon 8 500
283540
3
Hexagon 8 250
283541
3
Hexagon 8 250
283542
3
Hexagon 8 250
283544
3
Hexagon 8 100
283545
3
Hexagon 8 100
283546
3
Hexagon 8 100
283547
3
Hexagon 8 100
283552
3
Hexagon 8 100
283553
3
Hexagon 8 100
283554
3
Hexagon 8 100
283555
3
Hexagon 8 100
403183
3
Hexagon 8 100
403184
3
Hexagon 8 100
403185
3
Hexagon 8 100
403186
3
Hexagon 8 500
283556
3
Hexagon 8 500
283557
3
Hexagon 8 250
283558
3
Hexagon 8 250
283559
3
Hexagon 8 250
283560
3
Hexagon 8 100
283561
3
Hexagon 8 100
283562
3
Hexagon 8 100
283563
3
Hexagon 8 100
283564
3
Hexagon 8 100
283565
3
Hexagon 8 100
283623
3
Hexagon 8 100
283624
3
Hexagon 8 100
403187
3
Hexagon 8 100
403188
3
Hexagon 8 100
403189
3
Hexagon 8 100
403190
Pre-drill-Ø [mm] 5.0 5.3 5.5 5.7
Reference: · More information see approval ETA-13/0179 and ETA-18/0880
74
www.hilti.group
3.5.3Zinc-plated carbon steel self-tapping screws for thick base materials
S-MP 52Z
The universal self-tapping screw for thick base materials
G
0)
6:
/
3.5 Structural self-tapping screws
3
Ordering description
Minimum thickness of base material [mm]
Thickness fastened (MF)
[mm]
Screw diameter (d)
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Zinc-plated carbon steel self-tapping screws for thick base materials
S-MP 52Z 6.3x19
1.25 (Steel) 1.9 10
6.3
S-MP 52Z 6.3x25
1.25 (Steel) 1.9 16
6.3
S-MP 52Z 6.3x32
1.25 (Steel) 1.9 23
6.3
S-MP 52Z 6.3x38
1.25 (Steel) 1.9 29
6.3
S-MP 52Z 6.3x50
1.25 (Steel) 1.9 41
6.3
S-MP 52Z 6.3x63
1.25 (Steel) 1.9 54
6.3
S-MP 52Z 6.3x75
1.25 (Steel) 1.9 66
6.3
S-MP 52Z 6.3x88
1.25 (Steel) 1.9 79
6.3
S-MP 52Z 6.3x100
1.25 (Steel) 1.9 91
6.3
19
16
25
16
32
16
38
16
50
16
63
16
75
16
88
16
100
16
Reference: max steel thickness 12mm
Recommended pre-drill diameter for tII tII/mm (Steel) 1.25 1.5 1.6 4.0 4.1 6.9 7.0
Pre-drill-Ø [mm] 5.0 5.3 5.5 5.7
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 3/8 500
375279
3
Hexagon 3/8 500
375280
3
Hexagon 3/8 250
375281
3
Hexagon 3/8 250
375282
3
Hexagon 3/8 250
375283
3
Hexagon 3/8 100
375284
3
Hexagon 3/8 100
375285
3
Hexagon 3/8 100
375286
3
Hexagon 3/8 100
375278
www.hilti.group
75
3.5 Structural self-tapping screws
3.5.4 Stainless steel self-tapping screws for thin materials and wood S-MP 53S / S-MP 63S / S-MP 73S
The universal self-tapping screw for thin materials and wood
3
$
G
6:
0) /
Ordering description
Minimum thickness of base material
[mm]
Stainless steel (A2) self-tapping screw S-MP 53S
S-MP 53S 6.5x19
0.63 (Steel) 0.5 (Aluminum)
S-MP 53S 6.5x25
0.63 (Steel) 0.5 (Aluminum)
S-MP 53S 6.5x32
0.63 (Steel) 0.5 (Aluminum)
S-MP 53S 6.5x38
26 (Wood)
S-MP 53S 6.5x50
26 (Wood)
S-MP 53S 6.5x63
26 (Wood)
S-MP 53S 6.5x75
26 (Wood)
S-MP 53S 6.5x88
26 (Wood)
S-MP 53S 6.5x100
26 (Wood)
S-MP 53S 6.5x125
26 (Wood)
S-MP 53S 6.5x150
26 (Wood)
S-MP 53S 6.5x175
26 (Wood)
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Washer size
[mm]
1.2 8
6.5
1.2 14
6.5
1.2 21
6.5
1.2 27
6.5
1.2 39
6.5
1.2 52
6.5
1.2 64
6.5
1.2 77
6.5
1.2 89
6.5
1.2 114
6.5
1.2 139
6.5
1.2 164
6.5
19
16
25
16
32
16
38
16
50
16
63
16
75
16
88
16
100
16
125
16
150
16
175
16
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
3
Hexagon 8 500
80448
3
Hexagon 8 500
80362
3
Hexagon 8 250
80450
3
Hexagon 8 250
80451
3
Hexagon 8 250
80337
3
Hexagon 8 100
85332
3
Hexagon 8 100
224558
3
Hexagon 8 100
85334
3
Hexagon 8 100
85335
3
Hexagon 8 100
219093
3
Hexagon 8 100
219094
3
Hexagon 8 100
224559
Reference: · More information see approval ETA-18/0880
76
www.hilti.group
3.5 Structural self-tapping screws
Stainless steel self-tapping screws for thin materials and wood S-MP 53S / S-MP 63S / S-MP 73S
The universal self-tapping screw for thin materials and wood
Ordering description
Minimum thickness of
Thickness Screw
Screw
Washer
EPDM-
Screw
Sales
Item
base material
fastened diameter length (L) size
thickness drive /
quantity
number
range (MF) (d)
recess
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
type
[pc]
3
Stainless steel (A2) self-tapping screw S-MP 63S
S-MP 63S 6.5x19
0.63 (Steel) 0.5 (Aluminum)
1.2 8
6.5
19
19
3
Hexagon 8 500
285217
S-MP 63S 6.5x25
0.63 (Steel) 0.5 (Aluminum)
1.2 14
6.5
25
19
3
Hexagon 8 500
285218
S-MP 63S 6.5x32
0.63 (Steel) 0.5 (Aluminum)
1.2 21
6.5
32
19
3
Hexagon 8 250
285219
S-MP 63S 6.5x38
26 (Wood)
1.2 27
6.5
38
19
3
Hexagon 8 250
285220
S-MP 63S 6.5x50
26 (Wood)
1.2 39
6.5
50
19
3
Hexagon 8 250
285221
S-MP 63S 6.5x63
26 (Wood)
1.2 52
6.5
63
19
3
Hexagon 8 250
285222
S-MP 63S 6.5x75
26 (Wood)
1.2 64
6.5
75
19
3
Hexagon 8 100
285223
S-MP 63S 6.5x88
26 (Wood)
1.2 77
6.5
88
19
3
Hexagon 8 100
285224
S-MP 63S 6.5x100
26 (Wood)
1.2 89
6.5
100
19
3
Hexagon 8 100
285225
S-MP 63S 6.5x125
26 (Wood)
1.2 114
6.5
125
19
3
Hexagon 8 100
285226
S-MP 63S 6.5x150
26 (Wood)
1.2 139
6.5
150
19
3
Hexagon 8 100
285227
S-MP 63S 6.5x175
26 (Wood)
1.2 164
6.5
175
19
3
Hexagon 8 100
285228
Stainless steel (A2) self-tapping screw S-MP 73S
S-MP 73S 6.5x19
0.63 (Steel) 0.5 (Aluminum)
S-MP 73S 6.5x25
0.63 (Steel) 0.5 (Aluminum)
S-MP 73S 6.5x32
0.63 (Steel) 0.5 (Aluminum)
S-MP 73S 6.5x38
26 (Wood)
S-MP 73S 6.5x50
26 (Wood)
S-MP 73S 6.5x63
26 (Wood)
S-MP 73S 6.5x75
26 (Wood)
S-MP 73S 6.5x88
26 (Wood)
S-MP 73S 6.5x100
26 (Wood)
S-MP 73S 6.5x125
26 (Wood)
S-MP 73S 6.5x150
26 (Wood)
S-MP 73S 6.5x175
26 (Wood)
1.2 8
6.5
19
16
3
1.2 14
6.5
25
16
3
1.2 21
6.5
32
16
3
1.2 27
6.5
38
16
3
1.2 39
6.5
50
16
3
1.2 52
6.5
63
16
3
1.2 64
6.5
75
16
3
1.2 77
6.5
88
16
3
1.2 89
6.5
100
16
3
1.2 114 6.5
125
16
3
1.2 139 6.5
150
16
3
1.2 164 6.5
175
16
3
Hexagon 8 500
Hexagon 8 500
Hexagon 8 250
Hexagon 8 250 Hexagon 8 250 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100 Hexagon 8 100
285205
285206
285207
285208 285209 285210 285211 285212 285213 285214 285215 285216
Reference: max steel thickness 3mm
Recommended pre-drill diameter for tII
tII/mm (Steel)
Pre-drill-Ø [mm]
0.75
4.0
0.75 1.50
4.5
1.50
5.0
Pre-drill-Ø Wood [mm]: 4.5 4.5 4.5
Reference: · More information see approval ETA-18/0880
www.hilti.group
77
3.5 Structural self-tapping screws
3.5.5 Zinc-plated carbon steel self-tapping screws for thin materials and wood S-MP 53Z
The universal self-tapping screw for thin materials and wood
3
G 6:
0) /
Ordering description
Minimum thickness of base material [mm]
Thickness fastened range (MF)
Screw diameter (d)
[mm]
[mm]
Screw length (L)
Washer size
[mm]
[mm]
Zinc-plated carbon steel self-tapping screw S-MP 53Z
S-MP 53Z 6.5x19
1.2 8
6.5
S-MP 53Z 6.5x25
1.2 14
6.5
S-MP 53Z 6.5x32
1.2 21
6.5
S-MP 53Z 6.5x38
26 (Wood) 1.2 27
6.5
S-MP 53Z 6.5x50
26 (Wood) 1.2 39
6.5
S-MP 53Z 6.5x63
26 (Wood) 1.2 52
6.5
S-MP 53Z 6.5x100
26 (Wood) 1.2 89
6.5
19
16
25
16
32
16
38
16
50
16
63
16
100
16
Reference: max steel thickness 3mm
Recommended pre-drill diameter for tII tII/mm (Steel) 0.5 0.63 0.7 0.75 0.8 1.3 1.4 3.0
Pre-drill-Ø [mm] 3.5 4.0 4.5 5.0
Pre-drill-Ø wood [mm] 4.0 4.0 4.0 4.0
EPDMthickness
[mm]
Screw drive / recess type
Sales quantity
Item number
[pc]
2
Hexagon 8 500
375288
2
Hexagon 8 500
375289
2
Hexagon 8 250
375290
2
Hexagon 8 250
375291
2
Hexagon 8 250
375292
2
Hexagon 8 100
375293
2
Hexagon 8 100
375287
78
www.hilti.group
3.6 Non-structural Steel/Metal screws for HVAC applications
3.6 Non-structural Steel/Metal screws for HVAC applications S-MD 01Z / S-MS 01Z
Self-drilling screws for HVAC sheet metal applications
3
G
6:
/
G
G
6:
6:
'& '& 0) 0)
/
/
Ordering description
Zinc-plated carbon steel self-stitching screws S-MS 01Z 4.0x13 HEX S-MS 01Z 4.0x13 HEX S-MS 01Z 4.0x13 HEX S-MS 01Z 4.0x13 TX S-MS 01Z 4.0x13 SQ Zinc-plated carbon steel self-drilling HEX head screw S-MD 01Z 4.2x16
Drilling capacity range (DC) [mm]
Thickness fastened range (MF) [mm]
Screw diameter (d) [mm]
Screw length (L)
[mm]
Screw drive / recess type
Sales quantity
[pc]
Item number
0.63 2
0.63 1
4
0.63 2
0.63 1
4
0.63 2
0.63 1
4
0.63 2
0.63 1
4
0.63 2
0.63 1
4
13
Hexagon 7 750
406471
13
Hexagon 7 1'000
434027
13
Hexagon 7 2'500
416184
13
TX 20
1'000
406472
13
SQ 2
1'000
406473
1.2 2.5
1.2 7.5
4.2
16
Hexagon 7 1'000
10405
Reference:
· S-MS 01Z 4.0x13 screws are not covered by any certificate of usability (e.g. ETA or abZ). They are intended to be used for non-structural application, such as HVAC.
· More information about the S-MD 01Z see approval ETA-10/0182More information about the S-MD 01Z see approval ETA-10/0182
www.hilti.group
79
Content
Accessories and relatedCpororodsuioctns
Page
4.
Accessories and related products
81
4.1
Direct fastening accessories
81
4.1.1 Siding and decking nail X-ENP for fastening metal sheets to thick steel sub-structures
81
4.1.2 Sealing cap for X-ENP
82
4
4.1.3 Sheet metal nail X-ENP2K for fastening sheet metal and thin purlins
83
4.2.3
Powder-actuated fastening tools
84
4.3.3
Steel/Metal accessories, nut setter, SDT 9, bits, HPF System, ST tools
86
4.4
Saddle washer and sealing washer
91
4.4.1 Saddle washer for trapezoidal profile S-SWTR91
4.4.2 Saddle washer for trapezoidal profile S-SWTR RAL92
4.4.3 Saddle washer for wave profile S-SWWA
93
4.4.4 Which saddle washer is suitable for which profile?94
4.4.5 S-AW Sealing washer application example
97
4.4.6 Product Data
97
4.4.7 Dimensions
98
4.4.8 Sealing washern for screws with "PS" (S-MD)
98
4.4.9 Sealing washer for screws without "PS" (S-MD, S-MP)
98
4.4.10 Sealing washer for screws S-MS
99
4.4.11 Sealing washer for screws panel (S-CD/S-CDW)
99
80
www.hilti.group
4.1 Direct fastening accessories 4.1.1Siding and decking nail X-ENP for fastening metal sheets
to thick steel substructures
High performance nail for fastening metal sheets to thick steel substructures ( 6mm to full steel)
R
R
R
4.1 Direct fastening accessories
4
X-ENP Nail for the DX 76 and DX 76 PTR
Ordering description
Sheet metal nail X-ENP-19 L15
Minimum thickness of base material [mm]
6
Nail diameter (d)
[mm]
4.5
Nail length (l)
[mm] 24
Washer size
[mm] 15
Washer type
Sales Quantity
Item Number
[pc]
15
100
(Steel dome
double
Washer)
283506
X-ENP Nail, collated for the DX 76 and DX 76 PTR
Ordering description Sheet metal nail X-ENP-19 L15 MX
Minimum thickness of base material [mm]
6
Nail diameter (d)
[mm]
4.5
Nail length (l)
[mm] 24
Washer size
[mm] 15
Washer type
Sales Quantity
Item Number
[pc]
15 (Steel dome double Washer)
1'000
283507
X-ENP Nail, collated for the DX-860 and DX-9
Ordering description
Sheet metal nail X-ENP-19 L15 MXR
Minimum thickness of base material [mm]
6
Nail diameter (d)
[mm]
4.5
Nail length (l)
[mm] 24
Washer size
[mm] 15
Washer type
Sales Quantity
Item Number
[pc]
15 (Steel dome double Washer)
1'000
283508
Reference: · More informationen see approval ETA-04/0101
www.hilti.group
81
4.1 Direct fastening accessories
4.1.2 Sealing cap for X-ENP SDK2 / PDK2
Perfect optics of fastening point, watertight sealing as well with elongated hole. Easy usage with setting tool and hammer. Fits for X-ENP-19 L15 (MX)
4
nQeHoRpSrUeHnQeH
Ordering description Sealing cap PDK2 Sealing cap SDK2
Setting tool for sealing caps SDK2 / PDK2
Ordering description Setting tool PDK2 Setting tool SDK2
Material
Polyethylen Stainless steel (DIN 1.4404 ASTM 316)
Nail diameter (d) [mm]
22.5
22.5
Sales Quantity
[pc] 500 100
Item Number
52709 52708
Sales Quantity [pc]
1
1
Item Number
59301 59300
82
www.hilti.group
4.1.3Sheet metal nail X-ENP2K for fastening sheet metal and thin purlins
Fastening sheet metal and thin purlins from 3mm to 6mm thickness
R R
R
K ²PP
%DVHPDWHULDO WOO
0HWDOVKHHW WO
4.1 Direct fastening accessories
4
X-ENP2K Nail for the DX 76 PTR
Ordering description
Sheet metal nail X-ENP2K-20 L15
X-ENP2K Nail, collated for the DX 76 PTR
Ordering description
Sheet metal nail X-ENP2K-20 L15 MX
Minimum thickness of base material [mm]
3
Nail diameter (d)
[mm]
3.7
Nail length (l)
[mm] 22.5
Washer size
[mm] 15
Washer type
Sales quantity
Item number
15 (Steel dome double Washer)
[pc] 100
385133
Minimum thickness of base material [mm]
3
Nail diameter (d)
[mm]
3.7
Nail length (l)
[mm] 25.5
Washer size
[mm] 15
Washer type
Sales quantity
Item number
15 (Steel dome double Washer)
[pc] 1'000
385134
Reference: · More informationen see approval ETA-13/0172
www.hilti.group
83
4.2 Powder-actuated fastening tools
4.2 Powder-actuated fastening tools
Ordering description
4
Powder-actuated fastening tool DX 76 MX
Powder-actuated fastening tool DX 76 PTR
Powder-actuated tool DX 9-ENP
Content
1xBasic unit DX 76 1xPiston X-76-P-ENP 1xNail magazine MX 76 assy 1xCleaning kit DX 76/860 1xTool case DX 76
1xBasic unit DX 76 PTR 1xPiston X-76-P-ENP 1xNail magazine MX 76 assy 1xCleaning kit DX 76/860, 1xTool case DX 76
1xBasic unit DX 9-ENP_01 EU 1xNail magazine MX 9-ENP 01 1xPiston X-9-ENP 1xCleaning kit DX 76/860 1xTool case DX 9
Special cartridges for the DX 76
Ordering description
DX Special cartridge 6.8/18 M10 STD green light, only when X-ENP2K is used
DX Special cartridge 6.8/18 M10 BULK green light, only when X-ENP2K is used
DX Special cartridge 6.8/18 M10 STD yellow medium
DX Special cartridge 6.8/18 M10 BULK yellow medium
DX Special cartridge 6.8/18 M10 STD blue heavy
DX Special cartridge 6.8/18 M10 BULK blue heavy
DX Special cartridge 6.8/18 M10 STD red very heavy
DX Special cartridge 6.8/18 M10 BULK red very heavy
DX Special cartridge 6.8/18 M10 STD black very heavy
DX Special cartridge 6.8/18 M10 BULK black very heavy
Reference: · For the order item number and further information please visit your local Hilti Internet website
84
Sales Quantity [pc]
1
Item Number
286790
1
384004
1
282481
Sales Quantity [pc]
100
Item Number
416482
1'000
416487
100 1'000 100
416483 416488 416485
1'000
416490
100
416484
1'000
416489
100
416486
1'000
416491
www.hilti.group
Special cartridges for the DX 860 and DX 9
Ordering description
DX Special cartridge 6.8/18 M40 blue heavy DX Special cartridge 6.8/18 M40 red very heavy DX Special cartridge 6.8/18 M40 black very heavy
4.2 Powder-actuated fastening tools
Sales Quantity [pc] 2'400
2'400
2'400
Item Number
2128212
2128211
2128213
4
www.hilti.group
85
4.3 Steel/Metal accessories, nut setter, SDT 9, bits, HPF System, ST tools
4.3Steel/Metal accessories, nut setter, SDT 9, bits, HPF System, ST tools ST 1800-A22
Ordering description
Batteries-Metal construction screwdriver Set ST 1800-A22 + Battery B22 + Charger C4/36-350
4
Batteries-Metal construction screwdriver ST 1800-A22 + Hilti tool case
Batteries-Metal construction screwdriver ST 1800-A22 box
Content
1x Battery-Metal construction screwdriver ST 1800-A22 1x Nut setter S-NS 8 1x Protective cap 1x Hilti toolbox 2x Batteries B22 5.2 1x Battery charger 1x Depth Gauge 19
1x Battery Metal construction screwdriver ST 1800-A22 1x Nut setter S-NS 8 1x Protective cap 1x Hilti tool case 1x Depth Gauge 19
1x Battery Metal construction screwdriver ST 1800-A22 1x Nut setter S-NS 8 1x Protective cap 1x Depth Gauge 19
Sales Quantity [pc] 1
1
1
Corded metal construction screwdriver ST 1800 and ST 2500
Ordering description
Metal construction screwdriver ST 1800 230V Hilti tool case Metal construction screwdriver ST 1800 230V box Metal construction screwdriver ST 1800 110V box Metal construction screwdriver ST 2500 230V box Hilti tool case Metal construction screwdriver ST 2500 230V box Metal construction screwdriver ST 2500 110V box
Content
1x Metal construction screwdriver ST 1800 230 V 1x Cover cap 1x Hilti tool case
1x Metal construction screwdriver ST 1800 230 V 1x Cover cap
1x Metal construction screwdriver ST 1800 110 V 1x Cover cap
1x Metal construction screwdriver ST 2500 230V 1x Cover cap 1x Hilti tool case
1x Metal construction screwdriver ST 2500 230V 1x Cover cap
1x Metal construction screwdriver ST 2500 110V 1x Cover cap
Sales Quantity [pc] 1
1 1 1
1 1
Reference: · For the order item number and further information please visit your local Hilti Internet website
86
www.hilti.group
4.3 Steel/Metal accessories, nut setter, SDT 9, bits, HPF System, ST tools
Accessories
Ordering description Battery pack B 22/ 2.6 22V Li-Ion Battery pack B 22/ 4.0 22V Li-ion Battery pack B 22/ 5.2 22V Li-ion
Battery pack B 22/ 8.0 22V Li-ion
Content 1x Battery B22 2.6 1x Battery B22 4.0 1x Battery B22 5.2 1x Battery B22 8.0
Sales Quantity [pc]
1
Item Number
2136393
1
2183180
1
2136396
4
1
2183183
Screw guide ST-SG 5.5 for use with long sandwich panel screw with diameter 5.5mm, min length 55mm
1xScrew guide ST-SG 5.5, 1xNut setter S-NS 8
Screw guide ST-SG 5.5 for use with long sandwich panel screw with diameter 5.5mm, min length 55mm
Screw guide ST-SG 6.5 for use with long sandwich panel screw with diameter 6.5mm, min length 55mm
1xScrew guide ST-SG 5.5 3xNut setter S-NS 8
1xScrew guide ST-SG 6.5 1xNut setter S-NS 8
Screw guide ST-SG 6.5 for use with long sandwich panel screw with diameter 6.5mm, min length 55mm
Depth gauge ST-DG 19 for use with self-drilling screws with sealing washer up to dia. 19mm
Depth gauge ST-DG 22 for use with self-drilling screws with sealing washer up to dia. 22mm
Depth gauge S-TA Set for use with screws with sealing washer dia. 14mm 22mm
1xScrew guide ST-SG 6.5 3xNut setter S-NS 8
1
407521
1
414440
1
425545
1
425539
1
2005053
1
2005054
1
304611
Nut setter S-NS (C)
For use with heaxongal screw heads, non-magnetic
Ordering description
S-NS 3/8" C 50/2" S-NS 7 C 50/2" S-NS 8 C 50/2" S-NS 10 C 50/2" S-NS 13 C 50/2" S-NS 13 C 90/3 1/2"
Connection end
1/4" Hexagon 1/4" Hexagon 1/4" Hexagon 1/4" Hexagon 1/4" Hexagon 1/4" Hexagon
Drive
HEX3/8" HEX7 HEX8 HEX10 HEX13 HEX13
Sales Quantity [pc] 1 1 1 1 1 1
Item Number
2039250 2039243 2039244 2039245 2039247 2039251
Reference: · For the order item number and further information please visit your local Hilti Internet website
www.hilti.group
87
Magnetic nut setter S-NS (M)
For use with heaxongal screw heads, magnetic
Ordering description
S-NS 3/8" M 50/2" S-NS 7 M 50/2" S-NS 8 M 50/2" S-NS 10 M 50/2"
4 S-NS 13 M 50/2"
Bit and bit holder
Ordering description
Bit holder S-BH RC 50/2" S-B TX 25 25/1" T-HF (10) S-B TX 25 50/2" T-HF (5) S-B SQ2 25/1" T-HF (10) S-B PH2 25/1" T (10) S-B PH3 25/1" T (10)
4.3 Steel/Metal accessories, nut setter, SDT 9, bits, HPF System, ST tools
Connection end Drive
1/4" Hexagon 1/4" Hexagon 1/4" Hexagon 1/4" Hexagon 1/4" Hexagon
HEX3/8" HEX7 HEX8 HEX10 HEX13
Sales Quantity [pc]
1
1
1
1
1
Item Number
2039232 2039225 2039226 2039227 2039229
Sales Quantity [pc] 1
10
5
Item Number 2039219
2039138
2039143
10
2268363
10
2038979
10
2039039
Stand-up decking tool
Ordering description
Content
Stand-up handle SDT 9 Stand-up handle SDT 9 magazine Strip guide SDT 9-SG Strip catcher SDT 9-SC Nose piece SDT 9-NP R red Nose piece SDT 9-NP B black Nut setter S-SY SDT Handles SDT 9-H Stand-up handle frame SDT 9-F
1x Stand-up handle SDT 9, 1x Nut setter S-SY SDT 1x Stand-up handle SDT 9 magazine 1x Strip guide SDT 9-SG 1x Strip catcher SDT 9-SC 1 x Nose piece SDT 9-NP R red 1x Nose piece SDT 9-NP B black 1x Nut setter S-SY SDT 1x Handles SDT 9-H 1x Stand-up handle frame SDT 9-F
Sales Quantity [pc] 1 1
1
1
1
1
1
1
1
Item Number 2217520 2217521 2326719 2326718 2221453 2221454 2039260 2221456 2289587
Reference: · For the order item number and further information please visit your local Hilti Internet website
88
www.hilti.group
4.3 Steel/Metal accessories, nut setter, SDT 9, bits, HPF System, ST tools
Accessories for hidden panel fastening
Ordering description
Content
Stepped drill bit TS-HP 5,9-90 HPL Bit holder S-BH QC 64/2.5" TL
1x Stepped drill bit TS-HP 5,9-90 HPL 1x Bit holder S-BH QC 64/2.5" TL
Sales Quantity [pc]
1
1
Item Number
2301100 2301101
4
Reference: · For the order item number and further information please visit your local Hilti Internet website
www.hilti.group
89
Content
4.4
Saddle washer and sealing washer
4.4.1 Saddle washer for trapezoidal profile S-SWTR
4.4.2 Saddle washer for trapezoidal profile S-SWTR RAL
4.4.3 Saddle washer for wave profile S-SWWA
4.4.4 Which saddle washer is suitable for which profile?
4.4.5 S-AW Sealing washer application example
4
4.4.6 Product Data
4.4.7 Dimensions
4.4.8 Sealing washern for screws with "PS" (S-MD)
4.4.9 Sealing washer for screws without "PS" (S-MD, S-MP)
4.4.10 Sealing washer for screws S-MS
4.4.11 Sealing washer for screws panel (S-CD/S-CDW)
4.4 Saddle washer and sealing washer
Page
91
91 92 93 94 97 97 98 98 98 99 99
90
www.hilti.group
4.4 Saddle washer and sealing washer
4.4 Saddle washer and sealing washer 4.4.1 Saddle washer for trapezoidal profile
S-SWTR
For crown flange assembly of roof coverings made of steel, aluminum and plastic. Stabilizes the profile panel and prevents pressing in of the crown flange.
4
Angle Flange width
Ordering description
S-SWTR 15/20 S-SWTR 35/20 S-SWTR 30/23 S-SWTR 15/25 S-SWTR 27/25 S-SWTR 40/26 S-SWTR 35/28 S-SWTR 24/30 S-SWTR 38/30 S-SWTR 23/34 S-SWTR 33/37 S-SWTR 17/40 S-SWTR 36/40 S-SWTR 32/54 S-SWTR 22/57 S-SWTR 45/33
Angle (°)
15° 35° 30° 15° 27° 40° 35° 24° 38° 23° 33° 17° 36° 32° 22° 48°
Flange width (B)
[mm] 20 20 23 25 25 26 28 30 30 34 37 40 40 54 57 33
Paint
plain plain plain plain plain plain plain plain plain plain plain plain plain plain plain plain
Hole
[mm] 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3
EPDMthickness
[mm] 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Material
Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium
Material thickness
[mm] 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Saddle washer length [mm] 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
Sales quantity
[pc] 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Item number
2106943 2106944 2106945 2106946 2106947 2106948 2106949 2107120 2107121 2107122 2107123 2107124 2107125 2107126 2107127 2109680
www.hilti.group
91
4.4 Saddle washer and sealing washer
4.4.2 Saddle washer for trapezoidal profile S-SWTR RAL
For crown flange assembly of roof coverings made of steel, aluminum and plastic. Stabilizes the profile panel and prevents pressing in of the crown flange.
4
Angle Flange width
Ordering description
S-SWTR 36/40 RAL 7016 S-SWTR 36/40 RAL 8012 S-SWTR 36/40 RAL 3009 S-SWTR 36/40 RAL 9006 S-SWTR 17/40 RAL 7016 S-SWTR 17/40 RAL 8012 S-SWTR 17/40 RAL 3009 S-SWTR 17/40 RAL 9006 S-SWTR 32/54 RAL 7016 S-SWTR 32/54 RAL 8012 S-SWTR 32/54 RAL 3009 S-SWTR 32/54 RAL 9006 S-SWTR 24/30 RAL 7016 S-SWTR 24/30 RAL 8012 S-SWTR 24/30 RAL 3009 S-SWTR 24/30 RAL 9006 S-SWTR 27/25 RAL 7016 S-SWTR 27/25 RAL 8012 S-SWTR 27/25 RAL 3009 S-SWTR 27/25 RAL 9006
Angle (°)
36° 36° 36° 36° 17° 17° 17° 17° 32° 32° 32° 32° 24° 24° 24° 24° 27° 27° 27° 27°
Flange width (B)
[mm] 40 40 40 40 40 40 40 40 54 54 54 54 30 30 30 30 25 25 25 25
Paint
Hole
RAL 7016 RAL 8012 RAL 3009 RAL 9006 RAL 7016 RAL 8012 RAL 3009 RAL 9006 RAL 7016 RAL 8012 RAL 3009 RAL 9006 RAL 7016 RAL 8012 RAL 3009 RAL 9006 RAL 7016 RAL 8012 RAL 3009 RAL 9006
[mm] 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3
EPDMthickness
[mm] 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Material
Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium
Material thickness
[mm] 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Saddle washer length [mm] 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
Sales quantity
[pc] 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Item number
2107131 2107132 2107133 2107134 2107135 2107136 2107137 2107138 2107139 2107140 2107141 2107142 2107143 2107144 2107145 2107146 2107147 2107148 2107149 2107150
92
www.hilti.group
4.4 Saddle washer and sealing washer
4.4.3 Saddle washer for wave profile S-SWWA
For crown flange assembly of roof coverings made of steel, aluminum and plastic. Stabilizes the profile panel and prevents pressing in of the crown flange.
Radius
4
Width
Ordering description
S-SWWA 24/40 S-SWWA 32/51 S-SWWA 48/57
Radius
[mm] 24 32 48
Flange width (B)
[mm] 40 51 57
Paint
plain plain plain
Hole
[mm] 7.3 7.3 7.3
EPDMthickness
[mm] 2 2 2
Material
Aluminium Aluminium Aluminium
Material thickness
[mm] 1 1 1
Saddle washer length [mm]
45
45
45
Sales quantity
[pc] 100 100 100
Item number
2107128 2107129 2107130
www.hilti.group
93
4.4 Saddle washer and sealing washer
4.4.4 Which saddle washer is suitable for which profile?
Saddle washer
W36/40 W40/26 W36/40 W38/30 W27/25
W36/40
W35/20
W40/26
W23/34
4
W38/30
W27/25
W27/40
W27/25
W38/30
R24/40
R32/51
R48/57
W36/40 W48/33 W17/40 W27/25 W17/40 W17/40 W24/30 W32/54 W27/25 W36/40 W17/40 W17/40 W17/40 W27/25 W27/25 W27/25 R24/40
W36/40 W36/40 W36/40 W17/40 W36/40 W32/54 W32/54 W36/40 W36/40 W17/40 W17/40 W17/40 W36/40 W36/40 W17/40 W17/40
W15/25 W40/26
W33/37 W40/26 W40/26 W36/40 R24/40 R32/51 R32/51
W40/26 W36/40 W33/37 R32/51 W15/20 W15/20
Profile name
alubel 28 alubel 21 alubel 40 alubel 44 Alutech Dach
Aluform 20/125 Aluform 29/124 Aluform 30/153 Aluform 40/167 Aluform 42/250 Aluform 45/150 Aluform 45/200 Alutherm DT 900 Alutherm DT 1000 Welle 18/76 Welle 35/137 Welle 55/177
AL 34/207 A 35/207 B35/207 39/333 T AL 40/183 A 40/183 AL 42/333 S 44/180 AL 45/150 85/280 100/275 105/345 106/250 Ondatherm 1001 TS Ondafibre 3005 T Agratherm 1001 TS Welle 18/76
20/125 30/262K 35/207 40/183/183 S 50/250 58/315K 70/200 80/307 89/305 100/275 106/250 110/333 135/310 150/280 160/250 170/250
DP72/82/102/ 122/142/162 DP-F
DP 20/35 DP 20/65 DP 20/100 DP 35/115 DP Sinus 18/76 DP Sinus 35/143 DP Sinus Variant 35/143
DS 20/115 DS 35/190 DS 35/206 DS Sinus 35/143 SISCOROOF 4G SISCOTEC ROOF 4G
Manufacturer Alubel Aluform
Arcelor
Bieber Brucha Dansk Profiltechnik DS Staalprofil
Saddle washer
R 48/57 R 48/52 R 32/51
W33/37 W32/54 W36/40 W33/37 W17/40 W35/28 W32/54 R24/40
R24/40 R48/57 W38/30 W17/40 W17/40 W32/54 W32/54 W32/54
W36/40 W17/40 W32/54 W36/40 W17/40 W36/40 W36/40 W17/40 R24/40 R32/51 R48/57 W36/40 W36/40
W40/26 W40/26 W17/40 W38/30 W17/40 R24/40 W36/40
W27/25
W15/20
W35/20 W30/23 W36/40 W17/40 W32/54 W32/54 W27/25 W23/34
W24/30 W27/25
W36/40 W40/26
Profile name
Welle 5 Welle 6 Welle 8
EL 22/214 EL 30/220 EL 35/207 EL 39/333/S EL 40/183 EL 45/333/S EL 50/250 Welle EL 18/76
Dakprofiel 18 76 Dakprofiel 42 960 Dakprofiel 20 1090 Dakprofiel 35 1000 Dakprofiel 40 915 Dakprofiel 50 1000 Dakprofiel 58 945 KD Dakprofiel 70R 800
35/207 40/183 50/250 85/280 100/275 135/310 150/280 165/250 Sinus 18 Sinus 27 Sinus 42 DL 70; 80; 100; 120; 140; 160 20/220
W-20/990 W-20/1100 W-45R/900 W-45ER/1000 W-155/840 W-1/1064 W-35/1035
Isocop
Penta 40
JI 33.250.1000 JI 45.333.1000 JI 35.207.1035 JI 40.183.915 JI 50.250.1000 JI 58.317.945 JI Roof 1000 JI Ecopaneel 1000
KS 1000 RW KS 1000 FF
35.207.1035 39.333.1000
Manufacturer Eternit
Feilmeier
Finish Profiles
Fischer
Friedrich von Lien AG Weckman Isopan
Italpannelli Joriside
Kingspan Klinger & Partner Profilvertrieb GmbH
94
www.hilti.group
Saddle washer
W36/40 W27/25 W36/40 W23/34 W17/40 W17/40 W32/54 W17/40 W17/40 R24/40 R48/57 R48/57 W33/37 W15/20 W36/40 W17/25
W35/20 W15/20 W35/20
W36/40 W36/40 W40/26 W27/25 W38/30 W36/40 R24/40 R32/51 R48/57 R48/57
W27/25 W36/40 W40/26 R24/40 W35/20
W27/25 W40/26 R32/51
W27/25 W36/40 W36/40 W38/30 W27/25 W27/25 R24/40 R32/51 R48/57
W15/20 W15/20 W15/20 W35/20 W12/20
W40/26 W17/40 W36/40 W36/40 W17/40 W27/40 W24/30 W36/40 W27/25 W17/40 W30/23 W30/23 W30/23 W30/23 W30/23 R24/40 R32/51 R48/57
Profile name
KAS AL-20/125 A KAS AL-30/153 A KAS-35/207 KAS AL-40/167 A KAS-40/183 KAS AL-45/200 A KAS-50/250 KAS-85/280 KAS-89/305 KAS -18/76 KAS -42/160 KAS -55/177 KAS -D 65 115 KAS -D 68 KAS -D 80 KAS -D 62 142
Isocopre Eurocinque Eurocopre
35 207 22 214 20 75 45 333 S 40 100 50 250 18/76 27/111 42/160 55/177
LP 20 LP 35 LP 1100 Sinus 18 Eurocopre
LM40 250 1000 LM19 156 1094 LM 27-111-1000
35 207 22 214 20 75 45 333 S 45-150 45-333 S Welle 18-76 Welle 27-111 Welle 55-177
G4 Hipertec Dach Hipertec Dach Toproof DG SISCO
SP 20 SP 26 SP 30 SP 35 SP 40 SP 41 SP 44 SP 45 SP 59 SP 80 MTD TL 65 MTD TL 85 MTD TL 105 MTD TL 125 MTD TL 145 SP 18/1064 SP 27/1000 SP 42/960
www.hilti.group
Manufacturer Klöckner Lattonedil Laukien Lindab Luxmetall Maas Metecno
Montana
4.4 Saddle washer and sealing washer
Saddle washer W33/37
Profile name KP
Manufacturer M-Profil
W36/40 W48/33 W36/40 W36/40 W17/40 W27/25 W27/25 W32/54 W36/40 W17/40 W17/40 W17/40 W40/26
M 20/220 M 35.1/207 M 35/207 M 40.1/183 M 40/183 M 40/333 M 40KD/333 M 50/250 M 85/280 M 100/275 M 150/280 M 160/250 M 40/333
Münker
4
W36/40 W38/30 W17/40 W40/26 W23/34 W40/26 W36/40 W17/40 W27/25 W27/25 W27/25 W32/54 R24/40 R48/57 R32/51
20.125/8 20.136/8 25.280/3 25.268/4 30.207/5 30.153/7 35.207/5 40.183/5 40.250/4 45.150/6 45.333/3 50.250/4 Welle 18.76 Welle 55.177 Welle 27.111
O Metall
W40/26 W40/26 W30/40 R24/40 R48/57 W33/37 W17/40 W38/30 W36/40
Plannja 19 Plannja 20-102 Plannja 35 Sinus 18 Sinus 51 Plannja 20 Plannja 60 Plannja 30 Plannja 45
Plannja
W27/25 W36/40 W48/33 W36/40 W36/40 W36/40 W17/40 W36/40 W27/25 W32/54 W32/54 W23/34 W32/54 W17/40 W36/40 W36/40 W17/40 W17/40 W17/40 R24/40 R32/51 R48/57 R48/57
20/154 26/143 30/207 30/220 30 KD 35/207 40/183 45/150 45/333 50/250 58 KD 59/225 70/200 80/277 85/280 90/305 100/275 105/345 106/250 Welle 18/76 Welle 27/111 Welle 42/160 Welle 55/177
Proge
W15/25
D62; D82; D102; D122; D142
Romakowski
W36/40
SPCW; SPC2C PIR
Ruukki
95
Saddle washer
W27/25 W36/40 W17/40 W32/54 W32/54 W36/40 W36/40 W17/40 W36/40 W23/34 W32/54 W33/37 W33/37
4 R24/40
R48/57 R24/40
W36/40 W17/40 W32/54 W36/40 W17/40 W36/40
R24/40 W48/33 W17/40 W27/25 W32/54 W36/40 W36/40 W17/40
W15/20
W36/40 W36/40 W17/40 W32/54 W36/40 W17/40 W17/40 R24/40 R48/57 R32/51
W27/25
W36/40 W35/20 W48/33 W33/37 W36/40 W17/40 W27/25 W32/54 W36/40 W17/40 R24/40 R32/51 R48/57 W36/40 W15/20 R48/57 W35/20 W38/30 W40/26 W17/40
Profile name
19(KD)/1050 35R/1035 40R/915 50R/1000 70R/800 85R/1120 89R/915 100R/825 30KD/1050 45KD/1000 58KD/945 D 65-75-95-115-135 D135.1000 TL 18/988 42/960 27/1000
PS 35/207 PS 40/183 PS 50/250 PS 85/280 PS 100/275 SIP D
CB 18/76 CB 35/207 40/183 40/333 50/250 CB 75/305 85/280 100/275
Siegfalz
Hoesch Thermodach T 35.1 T 40.1 T 50.1 T 85.1 T 100.1 T 106.1 WP 18/76 WP 42/160 WP 27/100
SNV
WU 20/125 WU 30/200 WU 30D/207 WU 30W/207 WU 35/207 WU 40/183 WU 45/333 WU 50/250 WU 80/307 WU 100/275 WU 18/76 WU 27/111 WU 55/177 plusdach DL Ter Welle 42-160 30.200/5 39.333/3 39/333 41/193,5
Manufacturer
SAB
Salzgitter
Siegmetall Premium ThyssenKrupp Steel Europe AG
Trimo
Wurzer Profiliertechnik
GmbH
96
4.4 Saddle washer and sealing washer
www.hilti.group
4.4.5 S-AW Sealing washer application example
4.4 Saddle washer and sealing washer
4
4.4.6 Product Data
Material specification: z.B.: S-AW04 S16
S A W 04
S A
16
PS MS CD CDW
for screw fastening for accessories for washer 04 screw Ø 4,8mm 05 screw Ø 5,5mm 06 screw Ø 6,5mm Stainless steel 1.4301 (S for stainless steel) Aluminium 12 Sealing washern outside-Ø 12mm 14 Sealing washern outside-Ø 14mm 16 sealing washer outside-Ø 16mm 19 sealing washer outside-Ø 19mm 22 sealing washer outside-Ø 22mm for perfect sealing screw for chipless screw for sandwich panel screw for sandwich panel screw wood
Fastening tools: Tool ST 1800 / ST 1800-A22 with depth gauge
It is essential that the screw be driven correctly in order to ensure that the sealing washer will fulfill its function for many years.
www.hilti.group
97
4.4.7 Dimensions
Uses: For all outdoor applications where the fastening is exposed to the weather.
4.4 Saddle washer and sealing washer
4
4.4.8 Sealing washern for screws with "PS" (S-MD)
Ordering description
Sealing washer S-AW05S 16 PS Sealing washer S-AW06S 16 PS Sealing washer S-AW05S 19 PS Sealing washer S-AW06S 19 PS Sealing washer S-AW05S 22 PS Sealing washer S-AW06S 22 PS
4.4.9 Sealing washer for screws without "PS" (S-MD, S-MP)
Ordering description
Sealing washer S-AW04S 12 Sealing washer S-AW05S 12 Sealing washer S-AW04S 14 Sealing washer S-AW05S 14 Sealing washer S-AW04S 16 Sealing washer S-AW05S 16 Sealing washer S-AW06S 16 Sealing washer S-AW04S 19 Sealing washer S-AW05S 19 Sealing washer S-AW06S 19 Sealing washer S-AW04S 22 Sealing washer S-AW05S 22 Sealing washer S-AW06S 22
Washer size
[mm] 16 16 19 19 22 22
EPDMthickness
[mm] 2 2 2 2 2 2
Screw diameter (d) [mm]
5.5
6.3
5.5
6.3
5.5
6.3
Sales quantity
[pc] 200 200 200 200 200 200
Item number
2045877 2045874 2045878 2045875 2045879 2045876
Washer size
[mm] 12 12 14 14 16 16 16 19 19 19 22 22 22
EPDMthickness
[mm] 2 2 2 2 2 2 2 2 2 2 2 2 2
Screw diameter (d) [mm] 4.8 5.5 4.8 5.5 4.8 5.5 6.3/6.5 4.8 5.5 6.3/6.5 4.8 5.5 6.3/6.5
Sales quantity
[pc] 200 200 200 200 200 200 200 200 200 200 200 200 200
Item number
2109616 2109617 2109618 2109619 284880 284883 284886 284881 284884 284887 284882 284885 284888
98
www.hilti.group
4.4.10 Sealing washer for screws S-MS
Ordering description
Sealing washer S-AW04S 14 MS Sealing washer S-AW04A 14 MS Sealing washer S-AW04S 16 MS Sealing washer S-AW04A 16 MS
4.4.11 Sealing washer for screws panel (S-CD / S-CDW)
Ordering description
Sealing washer S-AW06S 16 CD Sealing washer S-AW06S 19 CD Sealing washer S-AW06S 22 CD Sealing washer S-AW06S 29 CD Sealing washer S-AW07S 16 CDW Sealing washer S-AW07S 19 CDW Sealing washer S-AW07S 22 CDW Sealing washer S-AW07S 29 CDW
4.4 Saddle washer and sealing washer
Washer size
[mm] 14 14 16 16
EPDMthickness
[mm] 2 2 2 2
Screw diameter (d) [mm]
4.8
4.8
4.8
4.8
Sales quantity
[pc] 200 200 200 200
Item number
2109660 2109661 2109662 2109663
4
Washer size
[mm] 16 19 22 29 16 19 22 29
EPDMthickness
[mm] 3 3 3 3 2 2 2 2
Screw diameter (d) [mm]
5.5
5.5
5.5
5.5
6.5
6.5
6.5
6.5
Sales quantity
[pc] 200 200 200 200 200 200 200 200
Item number
2109664 2109665 2109666 2109667 2109668 2109669 2109670 2109671
www.hilti.group
99
Hilti Corporation 9494 Schaan, Liechtenstein P +423-234 2111
www.facebook.com/hiltigroup www.hilti.group
Hilti = registered trademark of Hilti Corp., Schaan W4574 0822 0-en 1 Printed in Liechtenstein © 2022 Right of technical and programme changes reserved S. E. & O.
Adobe PDF Library 16.0 Adobe InDesign 16.4 (Macintosh)