™ "Hilti fasteners for steel" Keyword Found Websites Listing | Keyword Suggestions
Technical Library Search - Hilti Canada
The following pages are an excerpt from the North American Product Technical Guide, Volume 1: Direct Fastening Technical Guide, Edition 18. Please refer to the publication in its entirety for complete details on this product including data development, base materials, general suitability, installation, corrosion, and product specifications. http://submittals.us.hilti.com/PTGVol1/ To consult directly with a team member regarding our direct fastening products, contact Hilti's team of technical support specialists between the hours of 7:00am - 6:00pm CST. US: 877-749-6337 or HNATechnicalServices@hilti.com CA: 1-800-363-4458 ext. 6 or CATechnicalServices@hilti.com Hilti, Inc. 7250 Dallas Parkway, Suite 1000 Plano, TX 75024 1-800-879-8000 www.hilti.com 3.5.5.1 3.5.5.2 3.5.5.3 3.5.5.4 Product description Material specifications Technical data Ordering information S-SLC 01 M HWH Collated Sidelap Connectors S-SLC 01 M HWH Sidelap Connector S-SLC 02 M HWH Collated Sidelap Connectors S-SLC 02 M HWH Sidelap Connectors Approvals/Listings ICC-ES (International Code Council) ESR-2776 (AC43 for S-SLC 01 and S-SLC 02) ESR-2197 (AC43 for #10 HWH Screws) ESR-2196 (AC118 for S-SLC 02 and #10 HWH Screws) COLA (City of Los Angeles) RR 25877, RR 25678, RR 25296 FM (Factory Mutual) S-SLC 01 M HWH and S-SLC 02 M HWH fasteners for securing Class 1 Steel Roof Deck sidelaps with wind uplift ratings up to 1-330. 178 3.5.5 SLC SIDELAP CONNECTORS FOR FASTENING DECK-TO-DECK 3.5.5.1 PRODUCT DESCRIPTION The Hilti sidelap fastening system consists of a stand up tool (SDT 5), an electric screwdriver (ST 1800) or SD 4500 with SDT 5 Speed Kit) and collated sidelap connectors. For nestable steel deck profiles, the tool of choice is the SDT 5. It uses the ST 1800 electric or ST 1800-A22 battery screwdriver to drive sidelap connectors through sidelaps ranging from 16 to 26 gauge in thickness. Featuring an adjustable torque clutch, the ST 1800 or ST 1800-A22 helps ensure proper fastening while minimizing overdrive. The SDT5 can also use SD 4500 electric or SD 4500-A22 battery screw drive with SDT 5 Speed Kit for driving through sidelaps ranging from 20 to 22 gauge using SLC 01 and HWH #10 screws. When used with the SDT 5 and Hilti's DX 9 tools, the ST 1800-A22 or SD 4500-A22 with SDT 5 Speed Kit cordless screw drivers provides for a completely stand-up and cordless deck attachment. When compared with fastening individual, non-collated, screws, the SDT 5 offers the installer the capability to work upright. By improving the comfort of the installer and productivity, helping keep the project on time and on budget. Hilti steel deck sidelap fasteners comply with ANSI/SDI RD1.0, C1.0 and NC1.0 standards. 3.5.5.2 MATERIAL SPECIFICATIONS Fastener Fastener material Fastener plating S-SLC 01 M HWH S-SLC 02 M HWH Hilti #10 HWH Screw Carbon Steel Carbon Steel Carbon Steel 5 µm Zinc1 5 µm Zinc2 5 µm Zinc2 1 EN/ISO 4042 A/3/E. Reference Section 2.3.3.1 for more information. 2 Minimum requirements of EN/ISO 4042 A3F. Reference Section 2.3.3.1 for more information. 3.5.5.3 TECHNICAL DATA Allowable tension (pullout or pullover) and shear bearing loads for Hilti SLC Sidelap Connectors1,2,3 Sheet steel gauge Fastener 22 to 22 20 to 20 18 to 18 16 to 16 Tension Shear Tension Shear Tension Shear Tension Shear lb (kN) lb (kN) lb (kN) lb (kN) lb (kN) lb (kN) lb (kN) lb (kN) S-SLC 01 M HWH4,5 S-SLC 02 M HWH5 Hilti #10 HWH Screw6 105 (0.47) 85 (0.38) 70 (0.31) 148 (0.66) 148 (0.66) 139 (0.62) 120 (0.53) 100 (0.44) 85 (0.38) 198 (0.88) 198 (0.88) 186 (0.83) 150 (0.67) 130 (0.58) 115 (0.51) 302 (1.34) 302 (1.34) 283 (1.26) 165 (0.73) 145 (0.64) 428 (1.90) 402 (1.79) 1 Based upon attachment of two-same thickness layers of ASTM A1008 or minimum ASTM A653 SQ33 steel deck. 2 Allowable capacities based on a safety factor of 3.0. 3 Allowable tension capacities based upon the controlling capacity of pullout, pullover or fastener tension strength. 4 Use of S-SLC 01 M HWH with 18 gauge steel deck is recommended only for standard tensile strength (45 Fu 65 ksi) steel deck. For high tensile strength (Fu > 65 ksi) 18 gauge steel deck, use S-SLC 02 M HWH. 5 Allowable shear capacities calculated according to Section J4.3 of AISI S100 for standard No. 12 screw. For shear capacities when used in diaphragm applications in combination with Hilti deck frame fasteners, reference Pns values in Table 8 in Section 3.5.1.8. 6 Allowable shear capacities calculated according to Section J4.3 of AISI S100 for standard No. 10 screw. Direct Fastening Technical Guide, Edition 18 3.5.5.4 ORDERING INFORMATION SDT Stand-Up Decking Tool System Tools description ST 1800 Adjustable Torque Screwdriver ST 1800-A22 Adjustable Torque Cordless Screwdriver SD 4500 Screwdriver SD 4500-A22 Cordless Screwdriver SDT 5 Stand Up Tool (for use with the ST 1800, ST 1800-A22 and SD 4500, SD 4500-A22) Notes Qty Includes tool with depth gauge, 13 ft supply cord and operating instructions 1 pcs Includes tools, (2) B 22 Li-lon batteries, (1) C 4/36 90 charger and operating instruction sin a Hilti soft 1 pcs tool bag Includes tool with SDT 5 Speed Kit 1 pcs Includes tool with SDT 5 Speed Kit 1 pcs Includes stand up tool, 2 grips, magazine, bit holder, nut setter, supply cord strain relief 1 pcs Accessories description SDT 5 Magazine SDT Integrated Driver and Setter SDT 5 Speed Kit Notes Replacement magazine for SDT 5 Single piece design for SDT 5 For use with SD 4500 or SD 4500-A22 Qty 1 pcs 1 pcs 1 pcs Sidelap Connectors (combos including ST 1800 or ST 1800-A18 and SDT 30) description Notes SDT 5, ST 1800 and 10,000 Sidelap Connectors SDT 5, ST 1800 and 25,000 Sidelap Connectors SDT 5, ST 1800 and 50,000 Sidelap Connectors SDT 5, ST 1800 and 100,000 Sidelap Connectors SDT 5, ST 1800-A22 and 15,000 Sidelap Connectors Can include collated connector choices below Can include collated connector choices below Can include collated connector choices below Can include collated connector choices below Can include collated connector choices below Qty 10,000 pcs 25,000 pcs 50,000 pcs 100,000 pcs 15,000 pcs Sidelap connectors (collated)* description Deck thickness (GA) Qty S-SLC 01 M HWH 181, 20, 22, 24, 26 250 S-SLC 02 M HWH 16, 18, 20, 22 250 #10 HWH Screw 18, 20, 22, 24,26 250 1 Use of S-SLC 01 M HWH with 18 gauge steel deck is recommended only for standard tensile strength (45 Fu 65 ksi) steel deck. For high tensile strength (Fu > 65 ksi) 18 gauge steel deck, use S-SLC 02 M HWH. 179Adobe InDesign CS5.5 (7.5.3) Adobe PDF Library 9.9