Philips NeoPix 140 NPX140 Quick Start Guide

Welcome

This guide provides essential information to get your Philips NeoPix 140 projector up and running quickly.

What's in the Box

The package typically includes the projector, a remote control, batteries, power adapter, power cables, and a Quick Start Guide.

Product Overview

The Philips NeoPix 140 (NPX140) is a compact projector designed for home entertainment. It features various connectivity options and user-friendly controls.

Connections

The projector features the following ports:

• USB-C: For power input (supports 5V, 9V, 12V power banks) and potentially data transfer.
• USB-A: For power output (5V/1A) and connecting USB flash drives.
• HDMI: For connecting video sources like computers, game consoles, and media players.
• DC Power Input: For connecting the power adapter.
• Audio Output: For connecting external speakers or headphones.

Remote Control Functions

The remote control provides access to various functions:

1. Power On/Off
2. Navigation (Up, Down, Left, Right) and OK button
3. Home
4. Mute
5. Source Selection
6. Volume Up/Down
7. Back
8. Volume +/-

Setup and Operation

Follow these steps for initial setup:

1. Connect the power adapter to the projector and a power outlet.
2. Insert batteries into the remote control.
3. Turn on the projector using the power button on the remote or the device.
4. Use the remote control to navigate the on-screen menus and select your desired source (e.g., HDMI, USB).
5. Adjust the focus using the focus control on the projector or remote for a clear image.

Important Safety Information

Please read the following safety guidelines carefully:

• This product is for indoor use only.
• Place the projector on a stable, flat surface.
• Ensure adequate ventilation and do not cover the projector.
• Protect the product from direct sunlight, heat, extreme temperature fluctuations, and moisture.
• Do not place the projector near heaters or air conditioners.
• Avoid liquids entering the product. If liquids or foreign substances enter the product, turn it off, disconnect from power, and have it inspected by an authorized service center.
• If the product overheats or emits smoke, shut it down immediately, unplug the power cable, and have it checked by an authorized service center.
• Keep the product away from open flames.
• Do not use the product in very dusty environments.
• Do not expose the product to extreme vibrations.
• Keep the product out of reach of children and supervise children during use.

User Manual and Support

For detailed instructions, troubleshooting, and warranty information, please refer to the full user manual available at:

www.philips.com/support

You can also find support and community forums at community.screeneo.com.

Declarations of Conformity

Simplified EU and UK Declarations of Conformity are available at the Philips support website, confirming compliance with relevant directives.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it may not cause harmful interference, and it must accept any interference received. Modifications not expressly approved could void the user's authority to operate the equipment. This equipment has been tested and complies with Class B digital device limits, providing reasonable protection against harmful interference in residential installations. Ensure minimum distance of 20cm between the radiator and your body during operation.