Philips NeoPix Prime One
Quick Start Guide
Getting Started
Follow these steps to set up your NeoPix Prime One home projector.
1. Remove Lens Cover
Carefully remove the protective cover from the projector lens.
2. Connect Power
Connect the DC power adapter to the projector and a power outlet.
3. Power On
Press the power button [▶️ Power] on the projector or the remote control.
4. Adjust Focus
Use the adjustment knob [6] to achieve a sharp image.
5. Mounting Options
The projector features a 5-screw mount point for wall or tripod mounting. Remove the screw located on the bottom for access.
Ports and Connections
Port Layout
The projector features the following ports on the rear/side:
- AUX
- MICRO SD
- HDMI 1
- HDMI 2
- USB
- DC (Power Input)
- VGA
Connecting Devices
Wireless Screen Mirroring
Share content wirelessly from your smartphone or tablet.
Apple Devices
For Apple wireless screen mirroring, connect to the network named NeoPixPrime-D01DXXXX. You may be prompted to enter a password.
Android Devices
Enable screen mirroring on your Android device to connect wirelessly.
Wired Connections (HDMI)
For streaming content services like Netflix, Hulu, Canal+, Amazon Prime, an HDMI connection is required. An adapter may be necessary (not included). YouTube can be streamed via Wi-Fi or HDMI.
Connecting Phones/Tablets to HDMI
You will need one of the following adapters and cables:
- Apple Lightning to Digital AV adapter + HDMI cable
- USB-C to HDMI adapter + HDMI cable
- USB-C to HDMI cable
Projector Controls
Adjustment Knob
Used for fine-tuning the focus of the projected image.
Keys (on projector/remote)
- Source: Select input source
- Menu: Access settings menu
- Navigator: Navigate menus (Up/Down/Left/Right)
- Return: Go back to the previous screen
- Power: Turn the projector on/off [▶️ Power]
Support and Registration
Download the full user manual and register your product for further support at www.philips.com/support.
Compliance Information
FCC Compliance
FCC ID: 2ASRT-NPX535. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trademarks and Copyright
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Screeneo Innovation SA is the warrantor in relation to the product. © 2021 Screeneo Innovation SA. All rights reserved.
Company: Screeneo Innovation SA
Address: Route de Lully 5C, 1131 - Tolochenaz - Switzerland
Contact: philips.projector.eu@screeneo.com
Website: www.philips.com/welcome
Philips Customer Service Support - Home | Philips
