Videx VLF-A105RH Rechargeable LED Flashlight

Technical Parameters

A graph illustrates the relationship between output (lumens) and runtime (hours) for various modes: Turbo (1200 Lm, 1h), High (700 Lm, 1h 30min), Middle (420 Lm, 2h 35min), Low (220 Lm, 5h 40min), Moon (30 Lm, 80h), and SOS (700 Lm, 2h).

Main Features

• Maximum brightness of 1200 lumens in a compact body.
• Transformable body construction with a convenient swivel mechanism, allowing use as a regular flashlight or headlamp with the included headband.
• Nylon headband with a fast-release holder is included.
• Brightness stabilization system prevents fluctuations in brightness.
• Water resistance rated at IP66.

Included Items

• Flashlight VLF-A105RH
• Headband
• Li-ion battery Videx 18650 2200mAh
• Charging cable
• Lanyard
• Quick release holder
• User's manual
• Spare O-rings
• Metal clip

Lighting Modes

• Turbo: Maximum brightness
• High: High brightness
• Middle: Medium brightness
• Low: Low brightness
• Moon: Minimum brightness
• SOS: Emergency signal

Operating Instructions

• ON/OFF: Press and hold the button for 0.5 seconds to turn the light on or off.
• Modes Selection: When the light is on, shortly press the button to cycle through modes.
• SOS Mode: Press and hold the button for 3 seconds. Short press again to exit SOS mode.
• Lock/Unlock: With the light switched off, double-press the button continuously within 0.5 seconds to lock the flashlight. The flashlight will respond with a double flicker. Double-press again to unlock.
• Mode Memory: The flashlight automatically memorizes the last selected lighting mode (except SOS) and applies it the next time it is turned on.

Battery Status Indication

With the light switched off, shortly press the button to see the battery status (indication lasts for 3 seconds). The battery status is also continuously displayed when the light is turned on.

• Continuous green light: 100-80% charge.
• Flashing green light: 79-50% charge.
• Continuous red light: 49-25% charge.
• Flashing red light: 24-1% charge (critical).

Charging

• Plug the USB-A socket of the charging cable into an electrical outlet.
• Switch off the flashlight, open the protective cover, and connect the charging cable to the flashlight's USB Type-C port.
• The indicator glows red while charging and green when fully charged.
• After a full charge, unplug the charging cable and close the protective cover to prevent water and dust ingress.
• Original batteries are supplied charged and can be used immediately, but a full charge before first use is recommended.
• Charge the battery in time before it is completely discharged.
• For long periods of storage, it is recommended to keep the battery charge level at about half capacity to extend its service life.

Battery Replacement

• Unscrew the bottom lid of the flashlight counterclockwise.
• Insert the battery with the (+) contact towards the head of the flashlight.
• Screw the base all the way in and test the flashlight.

Maintenance and Safety Instructions

• For long-term storage, remove the batteries from the flashlight.
• It is recommended to regularly lubricate the rubber seals and threaded parts of the flashlight to prevent premature wear and ensure the waterproof housing. Replace damaged rubber rings.
• Lock the flashlight to avoid accidental activation during carrying and storage.
• ATTENTION: Avoid direct light into eyes, as it may cause eye damage.
• The flashlight can accumulate significant heat during prolonged use, which can make the body hot. Be careful to avoid burns.
• Do not shine the flashlight in close proximity to easily flammable substances to avoid fire.
• Do not use batteries other than those specified in the technical specifications.
• Do not disassemble the flashlight head, as this may compromise performance and void the warranty.
• Keep out of the reach of children.

Warranty

• The warranty for the flashlight is 3 years.
• The warranty for the battery is 1 year.
• The warranty does not cover accessories.
• The LED source inside the flashlight is not replaceable. If the LED fails, the entire flashlight must be replaced.
• During the warranty period, a faulty flashlight and battery can be exchanged or returned with proof of purchase and all accessories saved.
• The following are not covered by the limited warranty:
• Misuse of the product causing damage to its components.
• Unauthorized disassembly or presence of deep mechanical damage.
• Damage due to force majeure.

Environmental Protection

Pursuant to the provisions of the WEEE Act, it is forbidden to dispose of waste equipment marked with the symbol of a crossed-out bin [crossed-out bin symbol] together with other waste. Users wishing to dispose of electronic and electrical equipment must return it to a designated collection point. The equipment contains no hazardous components that have a particularly negative impact on the environment and human health.

The producer shall not be responsible for any damage resulting from the failure to follow these instructions. The producer reserves the right to make updates to this user's manual.

Manufacturer Information

Producer/Producent: Allegro Opt Sp. z o.o., Handlowa 23, 05-120 Legionowo, Poland. Made in P.R.C.

Manufacturer Address (Ukraine): ПП «Аллегро-опт», вул. Героїв Маріуполя, 106-Ж, м. Кропивницький, Україна, 25004. Тел./факс: +38(0522)245377.

Manufacturing Facilities: Nanhai Yisen Daily Use Co. LTD. Address: Sidian Town, Nanhai, Ningbo, Zhejiang, China.

For claims, contact the Manufacturer.

Date of manufacture and batch number are indicated on the product and packaging.