Parkside Cordless Rivet Gun 20V PBNSG 20-Li A1

Introduction

Congratulations on the purchase of your new appliance. You have selected a high-quality product. The operating instructions are part of this product. They contain important information about safety, usage, and disposal. Before using the product, please familiarise yourself with all instructions regarding safety and use. Use the product only as described and for the specified range of applications. Please also pass on all documents to any future owner.

Intended Use

The appliance is intended for joining suitable materials using blind rivets. Use this appliance only as described and for the areas of application specified. The appliance is not intended for commercial use. Any other usage or modification of the appliance is deemed to be improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse.

The appliance is part of the Parkside X20V TEAM series and can be operated using Parkside X20V TEAM batteries. Batteries from the Parkside X20V TEAM series may only be charged using Parkside X20V TEAM series chargers.

Features

Diagram Description: The main diagram shows the cordless rivet gun with numbered parts. Figure A displays four different nosepiece sizes (2.4 mm, 3.2 mm, 4.0 mm, 4.8 mm). Figure B illustrates the gripper jaws and their holder. Figure C shows the battery pack and a high-speed charger.

• 1 Union nut
• 2 Mandrel collector: Collects used mandrels.
• 3 Thread: For attaching the mandrel collector.
• 4 Belt clip: For attaching the tool to a belt.
• 5 Work light: Illuminates the work area.
• 6 Trigger: Activates the tool.
• 7 Nosepiece: Guides the rivet and mandrel.
• 8 Nose housing: Houses the nosepiece and gripper jaws.
• 9 Spare nosepiece: Additional nosepieces for different rivet sizes.
• 10 Replacement gripper jaws: For replacing worn gripper jaws.
• 11 Gripper jaws: Grip the rivet mandrel.
• 12 Gripper jaws holder: Holds the gripper jaws in place.
• 13 Battery pack: Power source (sold separately).
• 14 Release button: For removing the battery pack.
• 15 High-speed charger: For charging the battery pack (sold separately).

Package Contents

• 1 Cordless rivet gun 20V
• 4 nosepieces: 2.4 mm, 3.2 mm, 4.0 mm, and 4.8 mm (4.8 mm pre-fitted)
• 1 replacement jaws set (3-part)
• 1 carrying case
• 1 set of operating instructions

Technical Data

* Battery and charger are not supplied.

Safety Warnings

General Power Tool Safety Warnings

⚠️ WARNING! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

• 1. Work area safety: Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep children and bystanders away.
• 2. Electrical safety: Ensure proper plug and outlet matching. Avoid body contact with earthed surfaces. Keep away from rain/wet conditions. Do not misuse the cord. Use outdoor-suitable extension cords. Use RCD in damp locations.
• 3. Personal safety: Stay alert, use common sense. Do not use when tired or under the influence of substances. Wear personal protective equipment (PPE) including safety goggles ?. Prevent unintentional starting. Remove adjustment keys. Maintain proper footing and balance. Dress properly, avoid loose clothing. Ensure dust extraction is used. Do not become complacent.

Specific Safety Instructions for Blind Rivet Tools

• Keep hands away from moving parts.
• Do not allow broken off mandrels to fall to the floor.
• Ensure firm footing, especially when working at heights.
• Be aware of falling mandrels from elevated positions.
• Hold the appliance with a firm grip.
• Never point the tool at yourself or others.

Personal Protective Equipment (PPE)

• ? Wear ear muffs!
• ⚠️ Always wear safety goggles. ?
• ⚠️ Always wear a dust mask. ?

Power Tool Use and Care

• Do not force the tool. Use the correct tool for the application.
• Do not use if the switch is faulty.
• Disconnect power/battery before adjustments or storage.
• Store out of reach of children and untrained users.
• Maintain the tool and accessories.
• Keep cutting tools sharp and clean.
• Use accessories according to instructions.
• Keep handles dry and clean.

Use and Handling of the Cordless Electrical Power Tool

• Charge batteries only with recommended chargers.
• Use only supplied battery units.
• Store batteries away from metal objects to prevent short circuits.
• Avoid contact with leaking battery fluid; flush with water and seek medical help if necessary.
• Do not use damaged or modified batteries.
• Do not expose batteries to fire or excessive temperatures (over 130°C / 265°F).
• Follow charging instructions and temperature ranges.

Service and Maintenance

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. Never try to repair damaged batteries; they should only be maintained by the manufacturer or an approved service centre.

Maintenance and Cleaning

⚠️ WARNING! RISK OF INJURY! Always switch the appliance off and remove the battery before carrying out any work on the appliance.

• The appliance is maintenance-free.
• Keep the appliance clean, dry, and free from oil or grease.
• Never allow liquids into the appliance.
• Use a dry cloth for cleaning; avoid petrol or solvents.
• For long-term storage of lithium-ion batteries, check charge level regularly (50-80% optimum). Store in a cool, dry environment.

NOTE: Replacement parts that are not listed (such as batteries, switches, etc.) can be ordered via our Service Hotline.

Changing the Gripper Jaws

Worn gripper jaws should be replaced with the supplied ones. This involves unscrewing the union nut, removing the nose housing, unscrewing the gripper jaws holder, replacing the jaws, and reassembling in reverse order.

Disposal

?️ Do not dispose of power tools in your normal domestic waste!

This appliance is subject to Directive 2012/19/EU and must be disposed of at designated collection points, recycling depots, or disposal companies. Disposal is free of charge.

Protect the environment and dispose of this appliance properly.

If your old appliance contains personal data, delete it yourself before disposal.

Remove old batteries before disposal and take them to a separate collection point. If batteries are permanently installed, indicate this during disposal.

Local authorities can provide information on disposal.

Packaging is made from environmentally friendly material and can be disposed of at your local recycling plant. Note labelling for separation.

Kompernaß Handels GmbH Warranty

This appliance has a 3-year warranty from the date of purchase. Battery packs also have a 3-year warranty if included. Statutory rights are not restricted.

Warranty Conditions

• Warranty period starts on the date of purchase. Keep receipt as proof.
• For material or manufacturing faults within three years, the product will be repaired, replaced, or refunded at Kompernaß Handels GmbH's discretion.
• Proof of purchase and a description of the fault are required.
• Repair or replacement does not start a new warranty period.

Warranty does not apply to:

• Normal reduction of battery capacity over time.
• Commercial use.
• Damage or alteration by the customer.
• Non-compliance with safety/maintenance instructions or operating errors.
• Damage caused by natural hazards.

Warranty Claim Procedure

To ensure quick processing:

• Have receipt and item number (IAN 444079_2307) ready.
• Contact the service department by telephone or e-mail for defects.
• Return defective products free of charge to the provided service address with proof of purchase and fault description.

Download manuals, videos, and software at www.lidl-service.com. A QR code links directly to this service page.

⚠️ WARNING! Have your appliances repaired by the Service Centre or a trained electrician using only original spare parts. Ensure power plug/cord replacement is done by the manufacturer or service centre.

Service and Importer

Service Contact Information

• Great Britain: Tel.: 0800 404 7657, E-Mail: kompernass@lidl.co.uk
• Ireland: Tel.: 1800 101010, E-Mail: kompernass@lidl.ie

Importer:

• For EU market: KOMPERNASS HANDELS GMBH, BURGSTRASSE 21, 44867 BOCHUM, GERMANY, www.kompernass.com
• For GB market: Lidl Great Britain Ltd, Lidl House 14 Kingston Road, Surbiton, KT5 9NU

Translation of the Original Declaration of Conformity

KOMPERNASS HANDELS GMBH declares that this product complies with Machinery Directive (2006/42/EC), Electromagnetic Compatibility (2014/30/EU), and RoHS Directive (2011/65/EU).

Applied harmonised standards include EN 62841-1:2015/A11:2022, EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 63000:2018, EN ISO 12100:2010.

Type/appliance designation: Cordless Rivet Gun 20V PBNSG 20-Li A1

Year of manufacture: 01-2024

Serial number: IAN 444079_2307

Bochum, 05/10/2023

Signed by: Semi Uguzlu - Quality Manager.

[CE mark] [UKCA mark]

Ordering Replacement Battery and Charger

Replacement batteries and chargers can be ordered online at www.kompernass.com.

Scan QR codes for direct access to the website and available parts.

NOTE: For online order issues, contact the Service Centre. Always include IAN 444079_2307. Online ordering may not be available in all countries.

* Items also available at www.Lidl.de or www.grizzlytools.shop.