Quick Installation Guide

1. Connecting to Your Computer

Option 1: Direct Connection

Connect the Wireless USB Adapter directly to a USB port on your computer.

[Diagram: A computer connected directly to a USB adapter plugged into a USB port.]

Option 2: Via USB Extension Cable

Connect the Wireless USB Adapter to your computer using a USB extension cable.

[Diagram: A computer connected to a USB adapter via a USB extension cable, which is plugged into a USB port.]

Note for Windows XP/Vista: If the adapter is detected, a "Found New Hardware Wizard" window may appear. Click Cancel [❌].

For Mac OS X

1. Download the driver and utilities from the product support page at www.tp-link.com.
2. Unzip the downloaded folder and run Install.pkg.
3. Follow the on-screen instructions to complete the installation.

2. Installing the Driver

For Windows

1. Insert the CD and run Autorun.exe.
2. Alternatively, download the driver from the product support page at www.tp-link.com.
3. Select your adapter and follow the on-screen instructions to complete the installation.

Note: If you encounter issues installing the driver, try disabling your antivirus software and firewall, then attempt the installation again.

3. Connecting to a Wireless Network

For Windows

Option 1: Via Windows Wireless Utility

1. Click the network icon (?) on the taskbar.
2. Select your Wi-Fi network.
3. Click "Connect" [▶️] and enter the password when prompted.

Option 2: Via WPS Tool

If your adapter does not have a WPS button, you can skip this option.

1. Press the WPS button on your router.
2. Within 2 minutes, press and hold the WPS button [?] on the adapter until the WPS Tool opens.

[Diagram: Shows pressing WPS on router, then on adapter, leading to a WPS Tool interface showing network scan.]

Option 2: Via Wi-Fi Protected Setup (WPS)

If your adapter does not have a WPS button, you can skip this option.

1. Press the WPS button on your router.
2. Within 2 minutes, press and hold the WPS button [?] on the adapter until the following window appears.

[Diagram: Shows pressing WPS on router, then on adapter, leading to a WPS connection progress window.]

When the "Success!" [✔️] message appears, your computer is connected to Wi-Fi.

For Mac OS X

Option 1: Via TP-Link Utility

1. Click the TP-Link Utility icon (or similar) on the menu bar, or select the "Site Survey" tab in the utility's pop-up window.
2. Select your Wi-Fi network and enter the Wi-Fi password when prompted.

[Diagram: Shows the TP-Link Utility interface with a Site Survey tab and network selection.]

When you see the "WPS Protocol Finished" or "PBC - Get WPS profile successfully" message, the connection is complete.

For detailed instructions, refer to the user guide available on the product support page at www.tp-link.com.

Regulatory Information

NCC Notice

Attention: Low-power radio frequency devices that have obtained type approval certification must not, without permission, change frequency, increase power, or alter original design characteristics and functions by companies, business units, or users.

The use of low-power radio frequency devices must not affect flight safety and interfere with legal communications. If interference is found, it should be immediately suspended, and improved until no interference occurs before continuing use.

Legal communications refer to wireless communications operated in accordance with the Telecommunications Management Act. Low-power radio frequency devices must tolerate interference from legal communications or industrial, scientific, and medical electrical equipment. Avoid affecting the operation of nearby radar systems.

Safety Consultation and Precautions

• Use the original power adapter or only use this product with the specified power type.
• Before cleaning, unplug the power cord. Do not use liquid, aerosol cleaners, or a damp cloth.
• Be aware of moisture; do not spill water or other liquids onto the product.
• Slots and openings are for ventilation to ensure reliable operation and prevent overheating. Do not block or cover them.
• Do not place the product near heat sources. Ensure normal ventilation; do not place in enclosed spaces.
• Do not open the casing or attempt self-repair. If the product is faulty, contact the manufacturer or dealer.

Declaration of Conformity for Restricted Substances

Note 1: "Exceeds 0.1 wt%" and "Exceeds 0.01 wt%" indicate that the percentage content of the restricted substance exceeds the threshold.

Note 2: "◯" indicates that the percentage content of the restricted substance does not exceed the threshold.

Note 3: "-" indicates that the restricted substance is excluded.