Introduction
This user manual provides essential information for the safe and efficient operation of the Marta MT-4214 Infrared Cooker. Please read this manual carefully before using the appliance and save it for future reference.
Parts Identification
The appliance consists of the following main parts:
- 1. Housing: The main body of the cooker.
- 2. Control Panel: Interface for operating the appliance.
- 3. Cooking Hob: The surface where cookware is placed for heating.
The control panel features:
- (1) Power Button: Turns the appliance on/off.
- (2) Temperature Up Button: Increases temperature or timer settings.
- (3) Temperature Down Button: Decreases temperature or timer settings.
- (4) Timer Button: Sets the automatic shut-off timer.
- (5) Program Menu Button: Selects pre-set cooking programs and settings.
- (6) Panel Lock Button: Locks/unlocks the control panel to prevent accidental changes.
- (7) Stew Indicator: Lights up when the Stew program is selected.
- (8) Fry Indicator: Lights up when the Fry program is selected.
- (9) Soup/Broth Indicator: Lights up when the Soup/Broth program is selected.
- (10) Boil Indicator: Lights up when the Boil program is selected.
- (11) LED Display: Shows current settings, time, and error codes.
- (12) Hot Surface Indicator: Alerts the user that the cooking hob is hot ⚠️.
- (13) Temperature Setting Indicator: Shows that temperature settings are being adjusted.
- (14) Power Setting Indicator: Shows that power settings are being adjusted.
Operation
Before First Use
Unpack the appliance and remove all labels. Wipe the appliance body with a damp cloth and then dry it thoroughly.
Using the Appliance
- Place the electric cooker on a flat, horizontal surface.
- Ensure there is at least 10 cm of clearance around the appliance for ventilation. Do not block the ventilation openings to prevent overheating.
- Place cookware with a base diameter of at least 12 cm in the center of the cooking hob.
- Never place empty cookware on the hob. The overheat protection system will shut off the appliance if an empty pot is heated.
Control Panel and Programs
To start operation:
- Connect the appliance to the power outlet. It will enter standby mode.
- Press the "Power" button (1) to turn it on.
- Press the "Program Menu" button (5) to select one of the four automatic programs: Stew, Fry, Soup/Broth, or Boil.
Program Details and Manual Adjustment
Program | Default Power/Temperature | Manual Adjustment Available | Adjustment Range | Timer Availability |
---|---|---|---|---|
Stew (Тушение) | 1000 W | Yes | 200-2400 W | Up to 3 hours |
Fry (Жарка) | 350°C | Yes | 50-500°C | Up to 3 hours |
Soup/Broth (Суп/Бульон) | 2400 W | Yes | 200-2400 W | 45 minutes default, manual setting unavailable |
Boil (Варка) | 2400 W | Yes | 200-2400 W | 20 minutes default, manual setting unavailable |
Timer Function
In Stew and Fry modes, you can set an automatic shut-off timer. After selecting the program, press the Timer button (4) and use the "-" (3) and "+" (2) buttons to set the desired time, up to 3 hours. The display will show a countdown.
Panel Lock
To prevent accidental changes, press the Panel Lock button (6) briefly. The lock is now active. If the appliance is in standby, it can be turned on. If it is operating, the power can be turned off, but other functions are inaccessible. To unlock, press and hold button (6) for 3 seconds.
Hot Surface Warning
CAUTION: Do not touch the cooking hob while the Hot Surface Indicator (12) is active, even after the program has finished and the appliance is in standby. The hob remains hot and can cause burns.
Error Messages
The following error messages may appear during operation:
Code | Possible Cause | Suggested Solution |
---|---|---|
E1 | Thermistor short circuit or open circuit. | Contact the manufacturer or a competent after-sales service. |
E2 | Thermocouple circuit broken. | Contact the manufacturer or a competent after-sales service. |
E3 | Voltage too high. | Check your power supply. Unplug the appliance, wait 2 minutes, and plug it back in. |
E4 | Voltage too low. | Check your power supply. Unplug the appliance, wait 2 minutes, and plug it back in. |
E5 | Over-temperature protection of thermocouple. | Wait a few minutes for the appliance to cool down. |
E6 | Over-temperature protection of the panel. | Wait a few minutes for the appliance to cool down. |
Safety Instructions
- Read this manual carefully before using the appliance and save it for future reference.
- Check that the appliance's power supply specifications match your local power supply before first use.
- Use only for domestic purposes as per this manual. Not intended for industrial use.
- For indoor use only.
- Do not operate any damaged product.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord; always grasp the plug. Do not wrap the cord around the appliance.
- Never attempt to repair the appliance yourself. Contact a service center for issues.
- Using unrecommended accessories may damage the appliance.
- Always unplug the appliance and let it cool down before cleaning or if not in use.
- To avoid electric shock and fire, do not immerse the appliance in water or other liquids. If this happens, unplug immediately and contact a service center.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience, unless supervised or instructed by a responsible person.
- Do not use near explosives or flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch metal parts, as they get very hot during operation.
- Do not use the appliance for drying clothes, paper, or other items; use it only for cooking.
- Always check the temperature of prepared food, especially for children. Allow food to cool after cooking.
- Exercise caution when children are present.
- Do not allow children to use or play with the appliance.
- Individuals with pacemakers should maintain a distance of at least 60 cm from the operating appliance.
- The appliance is not intended for use by persons with physical or mental limitations or lack of experience, unless they are instructed by a person responsible for their safety.
Cleaning and Maintenance
- Always unplug the appliance from the power supply before cleaning.
- Allow the unit to cool down completely.
- Wipe external surfaces with a damp cloth and mild detergent. Do not use abrasive cleaners, organic solvents, or aggressive chemicals.
- For cleaning the cooking hob, use specialized glass-ceramic hob cleaners.
Storage and Transport
- Ensure the appliance is unplugged and completely cool before storing.
- Store in a dry environment at positive temperatures and humidity not exceeding 80%.
- Ensure packaging is intact during transport to maintain the appliance's condition.
Disposal
Dispose of the packaging, user manual, and the appliance itself in accordance with local waste recycling programs. Do not discard with regular household waste.
Technical Specifications
Specification | Details |
---|---|
Power Supply | 230 V ~ 50 Hz |
Manufacturer | Cosmos Far View International Limited, Room 701, 16 Apt, Lane 165, Rainbow North Street, Ningbo, China. Made in China. |
Warranty | Warranty does not cover consumables (filters, ceramic/non-stick coating, rubber seals, etc.). Production date is indicated in the serial number (4th/5th digits for month, 6th/7th for year). Manufacturer reserves the right to change specifications without notice. |
Manufacturer and Contact Information
Manufacturer: Cosmos Far View International Limited, Room 701, 16 Apt, Lane 165, Rainbow North Street, Ningbo, China.
Importer/Authorized Representative (Russia): LLC "Breeze", Russia, 194156, St. Petersburg, Bolshoy Sampsonievsky Ave., Bldg. 93, Lit. A, Premises 7-N, Office 5, Tel/Fax: +7 (812) 325-23-48.
Distributor (Russia): LLC "Valeriya", RF, 188670, Leningrad Region, Vsevolozhsky District, territory PR Sputnik, Tsentralnaya Street, Bldg. 58A, Premises 419A, Tel/Fax: +7 (812) 325-23-34.
For current service center information, visit: multimarta.com