Marta MT-4214 Infrared Cooker User Manual

Important Safety Instructions

Read this manual carefully before using the appliance and save it for future reference.

• Before first use, check the device specifications and the power supply in your network.
• Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
• For indoor use only.
• Do not operate any product with damage.
• Keep the power cord away from sharp edges and hot surfaces.
• Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
• Never attempt to disassemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
• Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
• Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
• To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do not use near explosives and flammable materials.
• Do not move the appliance until it is completely cool.
• Do not touch the metal parts of the device, because they get very hot during operation.
• Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.
• Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.

Before First Use

Unpack the appliance and remove all labels. Wipe the appliance body with a damp cloth, then dry it.

Using the Appliance

Place the electric hot plate on a flat horizontal surface. To prevent overheating, do not block the ventilation openings. Maintain a distance of at least 10 cm from walls. Place cookware with a bottom diameter of at least 12 cm in the center of the cooking surface. Do not place empty cookware; the overheat protection system will turn off the appliance if an empty pot is heated.

Control Panel

The control panel includes:

1. Power ON/OFF button
2. Power/Temperature increase button
3. Power/Temperature decrease button
4. Automatic shut-off timer button
5. Program selection and settings menu button
6. Control panel lock button
7. Stew program indicator
8. Fry program indicator
9. Soup/Broth program indicator
10. Boil program indicator
11. LED display
12. Hot surface indicator
13. Temperature setting mode indicator
14. Power setting mode indicator

Connect the appliance to the power supply. The display will show "OFF". The unit is ready for operation and in standby mode.

Press the "POWER ON/OFF" button (1). The display will show "ON".

Selecting Automatic Programs and Settings:

Press the menu button (5) to select one of the 4 automatic programs.

• Stew: Power 1000W. Adjust power from 200 to 2400W using buttons (2) and (3).
• Fry: Temperature 350°C. Adjust temperature from 50 to 500°C using buttons (2) and (3).
• Soup/Broth: Power 2400W. Adjust power from 200 to 2400W using buttons (2) and (3).
• Boil: Power 2400W. Adjust power from 200 to 2400W using buttons (2) and (3).

Setting the Automatic Shut-off Timer:

Press the timer button (4). "0:00" will appear on the display. Set the desired time up to 3 hours using buttons (3) and (2). A countdown will begin, and the program will automatically end when the timer finishes.

Control Panel Lock:

Press button (6) briefly to activate the control panel lock. The unit can be turned on if in standby mode. If the unit is operating, the power can be turned off, but other functions are inaccessible. To unlock, press and hold button (6) for 3 seconds.

To finish operation, press button (1). Do not touch the cooking surface while the hot surface indicator (12) is active, even after the program has ended and the unit is in standby mode, as it may cause burns.

Cleaning and Maintenance

• Always unplug the appliance from the power supply before cleaning.
• Let the unit cool down completely.
• Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals. For the ceramic surface, use special cleaners for glass-ceramic cooktops.

Storage and Transportation

Ensure the appliance is unplugged and completely cool. Perform cleaning as per the "Cleaning and Maintenance" section before storing. Store at positive temperatures with humidity not exceeding 80%. Shelf life is unlimited. Ensure packaging is protected during transport.

Disposal

Dispose of packaging, user manual, and the appliance itself according to local waste recycling programs. Do not dispose of with regular household waste.

Technical Specifications

Warranty does not cover consumables (filters, ceramic and non-stick coating, rubber seals, etc.).

The production date can be found in the serial number on the identification sticker on the gift box and/or on the device itself. The serial number consists of 13 characters; the 4th and 5th characters indicate the month, and the 6th and 7th indicate the year of production.

The manufacturer reserves the right to change the complete set, appearance, country of manufacture, warranty period, and technical characteristics of the model without prior notice. Please check when purchasing the device.