Package Contents
- Bluetooth speaker Niceboy RAZE mini
- Operating Instructions
- MicroUSB cable
Product Description
The speaker features controls on the top: a mode selection button (1), volume down/previous track button (2), volume up/next track button (3), a play/pause/call button (4), and an LED indicator/microphone (5).
On the side, there are the following ports and buttons:
- MicroSD card slot (6)
- USB port (7)
- On/Off button (8)
- Charging microUSB port (9)
Basic Operation
Turn the speaker on/off using the On/Off button (8). Switch between modes using the mode selection button (1) (indicated by beeping). Long-press buttons 2 and 3 to adjust volume (in all modes). Short-press buttons 2 and 3 to scroll through tracks (in Bluetooth, USB, MicroSD modes) or stations (in FM radio mode). Short-press button 4 to play or pause playback (in Bluetooth, USB, MicroSD modes).
Bluetooth Connection Mode
- In pairing mode, the blue LED indicator (5) flashes and the speaker emits a pairing sound.
- Activate Bluetooth on your device and select "RAZE mini" from the list of available devices.
- After successful pairing, a beep is heard and the LED indicator lights blue.
- Volume and track changes can also be controlled via your mobile phone or the speaker's buttons.
FM Radio Mode
- Insert the supplied USB cable into the charging USB port (9). The cable acts as an antenna. Switch to FM Radio mode.
- Press the tune button (4) to start automatic station searching (blue LED flashes quickly).
- Once stations are tuned (blue LED flashes slowly), you can switch between them by short-pressing buttons 2 and 3.
Playback Mode via USB and MicroSD Card
Inserting a memory card (6) or USB flash drive (7) automatically activates the respective mode, and music playback begins. You can also switch to the desired mode using the mode selection button (1).
Telephone Calls
Answer an incoming call by pressing button 4. Press the same button to end the call. Double-press button 4 quickly to redial the last called number.
Charging
A low battery level is indicated by an acoustic signal. To charge the speaker, connect the supplied USB cable to the charging port (9) and then to a 5V charging adapter or a PC's USB port. Charging progress is indicated by a red LED indicator (5), which turns off when fully charged (2-3 hours).
It is recommended to fully charge the speaker before the first use to maximize battery life.
Parameters
| Bluetooth: | 4.2 |
| Transmission distance: | up to 10 m |
| Power rating: | 5W |
| Sensitivity: | ≥ 95 dB |
| Frequency: | 280 Hz – 16 kHz |
| Dimensions and weight: | 92 x 92 x 46 mm, 190 g |
