Niceboy PARTY BOSS 2 200W User Manual

About This Manual

This manual provides comprehensive instructions for operating the Niceboy PARTY BOSS 2 200W party speaker.

Product Overview

Top Panel Components

• 1. LED Indicator: Visual status indicator.
• 2. Microphone Inputs (MIC-1, MIC-2): Ports for connecting microphones.
• 3. AUX Input: 3.5 mm audio input jack.
• 4. Charging Port: Connect the power adapter here (AC 100-240V/50-60Hz).
• 5. USB/SD Card Ports: Slots for USB flash drives and SD cards.
• 6. Power Switch: Turns the speaker ON/OFF.
• 7. MIC Volume: Adjusts the volume for the microphones.
• 8. Main Volume: Controls the overall speaker volume.
• 9. LIGHT Button: Short press cycles through lighting modes (LED 1-10) or turns off the lights.
• 10. REC Button: Records audio from microphones to a USB drive or Micro SD card.
• 11. Echo- / Echo+ Buttons: Adjust the echo effect for the microphone.
• 12. REPEAT Button: Repeats a single track or plays a track from USB/SD media in a loop.
• 13. Play/Pause Button: Controls playback (play/pause) for USB/SD and Bluetooth modes. Also used for TWS pairing (long press) and track navigation (previous/next).
• 14. MODE Button: Switches between input modes (Bluetooth, USB/SD, FM, AUX). Long press mutes voice prompts.
• 15. BLUE Button: Directly switches to Bluetooth mode.
• 16. LED Display: Shows status information and settings.
• 17. MEGA BASS Button: Enhances low-frequency bass response.
• 18. MENU Button: Accesses Bass, Treble, EQ, and Mic Volume adjustments.

Remote Control Functions

• 1. Mute: Mutes audio output.
• 2. Previous Track: Navigates to the previous track (USB/SD/Bluetooth) or channel (FM).
• 3. MODE Button: Switches input modes (Bluetooth, AUX, USB, SD). Long press mutes voice prompts.
• 4. REC Button: Initiates recording to USB/SD.
• 5. ECHO- Button: Decreases echo effect.
• 6. BASS +/- Buttons: Adjusts bass levels.
• 7. EQ Buttons: Selects equalizer presets (Normal, Rock, Mode, Classic, Country, Jazz).
• 8. MIC VOL +/- Buttons: Adjusts microphone volume.
• 9. POWER Button: Turns the device ON/OFF.
• 10. Pause/Play Button: Controls playback.
• 11. Next Track: Navigates to the next track (USB/SD/Bluetooth) or channel (FM).
• 12. LIGHT Button: Cycles through lighting modes or turns off lights.
• 13. REPEAT Button: Sets track repeat mode.
• 14. Play Recording Button: Plays recorded audio.
• 15. Delete Record Button: Deletes recorded audio.
• 16. ECHO+ Button: Increases echo effect.
• 17. MIC PRIORITY Button: Mutes music when microphone is active.
• 18. TREBLE +/- Buttons: Adjusts treble levels.
• 19. Main Volume Control: Adjusts overall volume.
• 20. Numeric Buttons: Select tracks (USB/SD) or FM stations.

Getting Started

Powering and Charging

Connect the supplied power cable to the charging port (4) on the rear panel. The built-in battery will charge when connected to the mains. A charging indicator light is present on the display (16).

Turning On the Speaker

Turn the main volume knob (8) fully counter-clockwise. Connect your audio sources. Turn on the speaker using the power switch (6). The speaker defaults to Bluetooth mode.

Operating Modes

Bluetooth Mode

1. The speaker automatically enters Bluetooth mode upon power-on. If not, press the MODE button (14) to select Bluetooth. The display will show a flashing "BLUE" indicator for pairing mode.
2. Enable Bluetooth on your device and select "Niceboy PARTY Boss 2 200W" from the list of available devices.
3. Successful pairing is confirmed by an audible tone and a steady "BLUE" indicator on the display. The speaker will automatically reconnect to the last paired device upon subsequent power-ons.

AUX Mode

1. Connect a 3.5 mm audio cable from your device to the AUX input (3).
2. Press the MODE button (14) until "LINE" appears on the display to select AUX mode.
3. Control music playback using your connected device. Adjust speaker volume with the main volume knob (8).

USB/SD Card Mode

1. Insert a USB flash drive or SD card into the respective port (5). The speaker will automatically switch to USB or SD mode, indicated on the display.
2. Use the PLAY/PAUSE (13) button to control playback and the NEXT/PREV buttons (13) to navigate tracks. Volume is adjusted via the main volume knob (8).
3. The device supports USB/SD media up to 32GB and MP3/WAV audio formats.
4. The USB port can also function as a power bank output.

FM Radio Mode

For optimal reception, place the speaker in an open area. The speaker has a built-in antenna.

1. Press the MODE button (14) until the display shows an FM station number (e.g., 90.3) to select FM mode.
2. Press the PLAY button (13) to initiate an automatic scan for stations. Found stations are saved automatically.
3. Use the NEXT/PREV buttons (13) or the remote's numeric buttons to switch between saved stations.

TWS (True Wireless Stereo) Mode

Connect two Niceboy PARTY BOSS 2 200W speakers for stereo sound.

1. Ensure both speakers are powered on and not connected to any Bluetooth device.
2. On one speaker, press and hold the TWS button (13) for 3 seconds to initiate pairing with the second speaker. The display will show "tUS". A successful pairing is indicated by an audio cue from both speakers.
3. On your device, enable Bluetooth and select "Niceboy PARTY Boss 2 200W". Pairing confirmation will be an audible signal. Speakers will disconnect if powered off or mode is changed.

Wireless Microphone Operation

Insert AA batteries into the wireless microphone. Turn on the microphone. It will automatically connect to the speaker. Adjust microphone volume using the MIC VOL knob (7) and echo effect with the ECHO+/- buttons.

Recording Function

Connect microphones or instruments to MIC.IN or GT.IN inputs to record vocals or music onto a USB drive or SD card. The media must contain MP3 or WAV files.

1. Turn off the speaker and connect instruments.
2. Turn on the speaker.
3. Insert USB drive or SD card.
4. The speaker will enter the appropriate media mode.
5. Press REC briefly to start recording. The display will show "REC".
6. Press and hold REC to stop recording.

Specifications

• BT Version: 5.0
• Frequency Band: 2.4 GHz
• Radio Frequency Power: ≤ 2.5 mW
• RMS Power: 200 W
• Power Supply: 100V-240V, 50/60 Hz
• Battery: 4.5Ah 12V
• Charging Time: 4 hours
• Playback Time: 8 hours
• Woofer: 2 x 8"
• Woofer Frequency Range: 50 Hz - 18 kHz
• Woofer Impedance: 4Ω, ±10%
• Woofer Sensitivity: 88 dB, ±2 dB
• Tweeter: 1 x 2"
• Tweeter Frequency Range: 3kHz - 18kHz
• Tweeter Impedance: 8Ω, ±15%
• Tweeter Sensitivity: 85 dB, ±3 dB
• Microphone: Wireless, directional
• Microphone Frequency: 40 Hz - 15 kHz
• Microphone Impedance: 10 KΩ / 1 kHz
• Microphone Sensitivity: 5dB

Safety Information

• Excessive volume can cause hearing damage.
• Avoid exposure to liquids, moisture, extreme temperatures, and sharp objects.
• Do not attempt to disassemble the unit.
• Handle batteries with care to prevent fire, overheating, or leakage.
• Battery lifespan is approximately six months as they are consumables.
• The device complies with EU directives (2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU). Full declaration available at: https://niceboy.eu/en/declaration/party-boss-2-200w

Disposal Information

For Households: Do not dispose of this electronic equipment with regular household waste. Take it to a designated collection point for proper recycling. This helps protect the environment and human health.

For Businesses: Contact the manufacturer or importer for disposal procedures. For countries outside the EU, consult local authorities or the seller.

Manufacturer Information

Manufacturer: NICEBOY s.r.o., 5. kvetna 1746/22, Nusle, 140 00, Prague 4, Czech Republic, ID: 294 16 876.

Made in China.

Certifications: RoHS, CE.