JBL TUNE660NC Wireless Noise-Cancelling Headphones

Your music, noise free.

What's in the Box

Power On & Connect

To power on and automatically enter pairing mode, press and hold the power button for 2 seconds.

Connecting to your device:

For Android 6.0+ (Fast Pair):

Your JBL TUNE660NC will automatically appear when you turn on your device. Tap to pair. The device will be tied to your Google Account.

For Others:

1. Go to your device's Bluetooth settings.

2. Turn on Bluetooth.

3. Select "JBL TUNE660NC" from the list of available devices to connect.

Manual Pairing

To power off, press and hold the power button for 5 seconds.

To manually enter pairing mode, press and hold the power button for over 5 seconds.

Then, follow the steps for "Connecting to your device" above.

Button Commands

Multi-Point Connection

Connect to two devices simultaneously. Your JBL TUNE660NC supports connecting up to 2 devices.

Switching Music Source: Pause music on the current device and play on the second device.

Call Priority: Phone calls will always take priority over music.

Reconnecting: If one device goes out of Bluetooth range or powers off, you may need to manually reconnect the remaining device.

Disconnecting: To disconnect multi-point, select "Forget this device" on your Bluetooth devices.

To enter pairing mode with the 2nd device, press and hold the power button for over 2 seconds.

Charging

Connect the USB Type-C cable to charge your headphones.

Full charge takes approximately 2 hours.

Quick Charge: 5 minutes of charging provides up to 2 hours of playtime.

LED Behaviors

IndicatorStatus
☀️ANC ON
/ Power On/Off
?BT Connecting
?BT Connected
?Low Battery
?Charging
?Fully Charged

Technical Specifications

Model:TUNE660NC
Driver Size:32 mm / 1.26 " Dynamic Driver
Power supply:5V ⎓ 1A
Weight:166 g / 0.366 lbs
Headset battery type:Polymer lithium-ion battery (610 mA / 3.7 V)
Charging time:< 2 hrs from empty
Music playtime with BT on:Up to 55 hrs
Music playtime with BT on and ANC on:44 hrs
Music playtime with AUX and ANC on:35 hrs
Frequency Response:20 Hz – 20 kHz
Impedance:32 ohm
Sensitivity:100 dB SPL @ 1 kHz / 1 mW
Maximum SPL:96 dB
Microphone sensitivity:-42 dBV @ 1 kHz / Pa
Bluetooth version:5.0
Bluetooth profile version:A2DP 1.3, AVRCP 1.5, HFP 1.6
Bluetooth transmitter frequency range:2.402 GHz – 2.480 GHz
Bluetooth transmitter power:< 10 dbm
Maximum operation temperature:45 °C

Battery Lifespan & Care

To prolong battery lifespan, fully charge at least once every 3 months. Battery life varies by use and settings.

RF Exposure Information

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC:6132A-TUNE660NC) has also been tested against this SAR limit. According to this standard, the highest SAR value reported during product certification for head use is 0.000351 W/kg. The device was tested for typical bodily operations where the product was kept 5 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0 mm between the user's head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head Operation:

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user's ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

IC:6132A-TUNE660NC

Warranty Information

This document provides warranty information for JBL products distributed by Ingram Micro in Australia. Harman Products come with guarantees that cannot be excluded under the Australian Consumer Law.

Warranty Against Defects:

During the warranty period, you are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Warranty Period:

Register your JBL product at www.jbl.com.au/support-warranty.html to ensure you receive product and firmware updates.

How to Claim:

Contact the seller who sold you the Product, or contact the Harman customer support team at +61 2 9151 0376 or email support.apac@harman.com. You are responsible for the cost of returning the defective Product unless notified otherwise.

Manufacturer & Distributor:

HARMAN International Industries, Incorporated, 8500 Balboa Boulevard, Northridge, CA 91329 USA. www.jbl.com

Ingram Micro Pty Limited (ABN 45 112 487 966) is an authorized distributor.

©2020 HARMAN International Industries, Incorporated. All rights reserved.

Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Features, specifications and appearance are subject to change without notice.

Models: Tune 660NC, Wireless On Ear Active Noise Cancelling Headphones, Tune 660NC Wireless On Ear Active Noise Cancelling Headphones, On Ear Active Noise Cancelling Headphones, Active Noise Cancelling Headphones, Headphones

File Info : application/pdf, 20 Pages, 3.31MB

PDF preview unavailable. Download the PDF instead.

109TN660BL

References

Adobe Acrobat Pro DC (32-bit) 22 Paper Capture Plug-in

Related Documents

Preview JBL TUNE660NC Quick Start Guide
Get started with your JBL TUNE660NC headphones. This guide provides instructions on unboxing, powering on, pairing, button controls, multi-point connection, charging, LED indicators, and technical specifications.
Preview JBL Tour One M3: Draadloze Over-Ear Koptelefoon met Ruisonderdrukking
Ontdek de JBL Tour One M3, geavanceerde over-ear koptelefoons met Hi-Res Audio, True Adaptive Noise Cancelling 2.0, JBL Spatial 360 geluid en 70 uur batterijduur. Ervaar legendarisch JBL Pro Sound.
Preview JBL TOUR ONE Quick Start Guide: Get Started with Your New Headphones
Get started with your JBL TOUR ONE noise cancelling headphones. This quick start guide covers setup, app features, Bluetooth pairing, controls, and technical specifications for an optimal audio experience.
Preview JBL LIVE 670NC Wireless On-Ear Headphones with True Adaptive Noise Cancelling
Discover the JBL LIVE 670NC wireless on-ear headphones featuring JBL Signature Sound, True Adaptive Noise Cancelling with Smart Ambient, long battery life, and seamless multi-point connectivity. Perfect for immersive audio experiences.
Preview JBL Tour One M3 Wireless Noise Cancelling Headphones
Explore the JBL Tour One M3 over-ear headphones featuring legendary JBL Pro Sound, True Adaptive Noise Cancelling 2.0, JBL Spatial 360 Sound, and up to 70 hours of playback. Experience immersive audio and crystal-clear calls with advanced Bluetooth 5.3 connectivity.
Preview JBL CLUB ONE Headphones Quick Start Guide
A quick start guide for the JBL CLUB ONE wireless, over-ear headphones, detailing setup, app integration, button commands, and technical specifications.
Preview JBL LIVE770NC Quick Start Guide: Setup, Controls, and Features
A comprehensive guide to setting up and using your JBL LIVE770NC headphones. Learn about Bluetooth pairing, controls, app integration, voice assistants, charging, and technical specifications.
Preview JBL TUNE600BTNC Wireless Noise Cancelling Headphones: Quick Start Guide
Get started with your JBL TUNE600BTNC wireless on-ear headphones. This guide covers Bluetooth pairing, music and call controls, ANC activation, wired listening, LED status indicators, and technical specifications.