JBL CLUB ONE Quick Start Guide
What's in the Box
Your JBL CLUB ONE headphones package includes:
- JBL CLUB ONE Headphones
- Audio Cable
- USB Charging Cable
- Carrying Case
- Quick Start Guide
- Warranty Card
- Safety Sheet
JBL Headphones App
Enhance your listening experience with the JBL Headphones app. Download it from the Google Play Store or the Apple App Store to gain more control and personalization.
Available on: Google Play | App Store
Power On & Connect
Press and hold the power button for 3 seconds to turn on the headphones. They will automatically enter pairing mode.
Indicator: Power LED turns on.
Button Commands
- ANC ON/OFF & TalkThru: Press and hold for 2 seconds to toggle Active Noise Cancelling (ANC) and TalkThru modes.
- Voice Assistant (Google Assistant/Alexa/Siri): Press the button once (×1) to activate your preferred voice assistant.
- Play/Pause/Call Management: Press the button once (×1) to play/pause music or answer/end calls. Press and hold for 2 seconds to reject an incoming call or switch to call waiting.
- Next Track: Double press the button (×2).
- Previous Track: Triple press the button (×3).
- Volume Up: Press and hold the '+' button.
- Volume Down: Press and hold the '-' button.
- Ambient Aware / TalkThru: Press the button once (×1) to cycle through Ambient Aware, TalkThru, and ANC Off modes.
Wired Listening
Connect the included audio cable to the 3.5mm aux input on the headphones and your audio source for wired listening. This also enables Hi-Res Audio.
Multi-Point Connection
Connect to two Bluetooth devices simultaneously. The headphones will automatically switch between devices.
Indicator: Pairing mode is indicated by a flashing LED.
Charging
Connect the USB charging cable to the headphones and a power source. A full charge takes approximately 2 hours.
Indicator: Charging LED behavior indicates charging status (charging, low battery, fully charged).
LED Behaviors
- Power On: LED illuminates.
- BT Connecting: LED flashes.
- BT Connected: LED is solid.
- ANC On: LED indicates ANC is active.
- Low Battery: LED indicates low battery status.
- Charging: LED indicates charging in progress.
- Fully Charged: LED indicates charging is complete.
Technical Specifications
Specification | Value |
---|---|
Driver Size | 40 mm dynamic driver |
Frequency Response (Passive) | 10 Hz – 40 kHz |
Frequency Response (Active) | 10 Hz – 22 kHz |
Sensitivity | 95 dB SPL@1kHz/1mW |
Maximum SPL | 94 dB |
Maximum Input Power (Passive) | 3500 mW |
Microphone Sensitivity | -38 dBV@1kHz/Pa |
Impedance | 32 ohm |
Bluetooth Transmitted Power | <4 dBm |
Bluetooth Transmitted Modulation | GFSK, π/4 DQPSK, 8DPSK |
Bluetooth Frequency | 2.402 GHz - 2.480 GHz |
Bluetooth Profile Version | A2DP 1.3, AVRCP 1.5, HFP 1.6 |
Bluetooth Version | V5.0 |
Battery Type | LITHIUM-ION POLYMER BATTERY (3.7 V/730 mAh) |
Power Supply | 5 V 1.0 A |
Charging Time | < 2 hrs |
Music Playtime with BT on | 45 hrs |
Music Playtime with BT & ANC on | 23 hrs |
Music Playtime with Aux-in & ANC on | 25 hrs |
Weight | 378.5 g |