Hama TV Wall Bracket Quick Installation Guide

1. Drilling the holes

Mark the desired position on the wall. Ensure a minimum distance of 70mm from the ceiling. The drilling diameter should be Ø10mm. Use appropriate wall plugs (A2) for your wall type.

Measurements: 70mm, Ø10mm.

2. Wall mounting the bracket

Insert wall plugs (A2) into the drilled holes. Attach the wall bracket (F1) to the wall using screws (e.g., A1, A3) and wall plugs (A2). Ensure the bracket is level.

Measurement: 10 mm.

3. Mounting on backside of the TV

Attach the mounting plate (F2) to the back of the TV. The choice of screws and spacers depends on whether the TV is flat or curved.

For Flat TVs: Use screws C1, D1, D4, E1 with spacer B1.

For Curved TVs: Use screws C2, D2, D3, D4, E1, E2 with spacers B2 or B3.

Refer to the specific screw/spacer combinations indicated in the original diagram for precise selection.

4. Fixing the wall bracket

Mount the TV with the attached mounting plate (F2) onto the wall bracket (F1). Secure the TV by locking the safety mechanism.

Example screw combinations for securing: M8x50, Ø8x5, M8x45 (D4).

5. Adjustments

Once mounted, the TV can be adjusted for tilt, swivel, and pull-out. The bracket allows for adjustments up to -/+15° tilt, -/+3° swivel, and a rotation of 160°/150°.

Adjustments: - /+15° (Tilt), - /+3° (Swivel), 160°/150° (Rotation).