Yaheetech 611467 Bird Cage Assembly Instructions

Important Information

• Assembly Recommendation: 1 or more people recommended for assembly.
• Estimated Assembly Time: 1 hour.
• Safety Warning: Not intended for use by children. Keep away from fire or heat sources.
• Recommendation: Wearing protective gloves is advised during assembly.

Assembly Precautions

Please follow the instruction manuals carefully and use a protective pad or cover to avoid damage to the product and floor during assembly.

Parts List

The following parts are included in the package:

1. Frame Panel (x1)
2. Frame Panel (x1)
3. Frame Panel (x1)
4. Frame Panel (x1)
5. Frame Panel (x2)
6. Frame Panel (x1)
7. Frame Panel (x1)
8. Frame Panel (x2)
9. Ladder (x1)
10. Base Tray Support (x1)
11. Top Tray (x1)
12. Bottom Tray (x1)
13. Tray (x2)
14. Tray Support (x2)
15. Tray Support (x1)
16. Tray Support (x1)
17. Tray Support (x1)
18. Tray Support (x1)
19. Screw (x4)
20. Screw (x2)

Hardware:

• Allen Wrench (A) (x1)
• Cup (B) (x2)
• Cup (C) (x2)
• Cup Holder (D) (x4)
• Curved Rod (E) (x2)
• Bolt (F) (x20)
• Bolt (G) (x8)
• Screw (H) (x4)
• Nut (I) (x8)
• Wire (J) (x1)

Assembly Steps

1. Step 1: Attach part (H) x2 to part (E) x2, then attach to part (13) x1.
2. Step 2: Connect frame panels (5) x2, (6) x1, (7) x1, and (13) x4 using bolts (F) x4. Ensure the longer edge of part (5) with two grooves faces upwards, and the edge with a single groove faces downwards.
3. Step 3: Attach frame panels (1) x1 and (2) x1 to the base structure using bolts (F) x4.
4. Step 4: Attach frame panels (3) x1 and (4) x1 to the assembled structure using bolts (F) x4.
5. Step 5: Slide the top tray (11) into the designated slots.
6. Step 6: Secure the top of the cage using bolts (B) x2 and (F) x8.
7. Step 7: Attach the curved rods (20) x2 to the top of the cage using bolts (F) x2.
8. Step 8: Attach the perch supports (D) x4 to the cage using bolts (F) x2 and nuts (I) x8. Then attach the perch (10) x1 to the supports.
9. Step 9: Attach the top perch (18) x1 to the cage.
10. Step 10: Insert the cups (B) x2 and (C) x2 into their respective holders.
11. Step 11: Attach the tray supports (14) x2, (15) x1, and (16) x1 to the cage using bolts (G) x8 and nuts (I) x8.
12. Step 12: Slide the trays (12) x1 and (13) x2 into the tray supports.
13. Step 13: Place the ladder (9) inside the cage.
14. Step 14: Attach the wire (J) x1 to the designated point on the cage.

Customer Support

If you are not entirely satisfied with your purchase, please contact customer support by following these steps:

1. Go to Your Orders.
2. Find your order in the list.
3. Select 'Problem with order'.
4. Choose your topic from the displayed list.
5. Select 'Contact seller'.

The electronic Installation Manual can also be downloaded from the 'Product guides and documents' section of the advertising page.