en_us
Manual-Hub.com - Free English product PDF Documents!
User Guide for ADVANTECH models including: SEG520-4SFP-T Industrial Managed Ethernet Switch, SEG520-4SFP-T, Industrial Managed Ethernet Switch, Managed Ethernet Switch, Ethernet Switch
ADVANTECH B B SMARTWORX SEG520-4SFP-T (01) PDF MANUAL - Manual-Hub.com
File Info : application/pdf, 2 Pages, 1.47MB
DocumentDocumentProduct Overview Power Wall Mounting 10/100/1000 Ethernet Ports LED Panel Console Serial Port 100/1000 SFP Ports 1 Hardware Installation DIN Rail Mounting 2 Terminal Blocks Terminal V2V2+ P-Fail P-Fail V1V1+ Description Power Input 2 (DC Ground) Power Input 2 (12 to 48VDC) Power Fault Relay Power Fault Relay Power Input 1 (DC Ground) Power Input 1 (12 to 48VDC) https://manual-hub.com/ Ground Wire Gauge: 12-24 AWG (3.31 - 0.205 mm2). Torque: 7lb-in. NOTE: P-Fail Relay is closed if both power input ports are powered. The default is open. 3 LED Status LED SYS R.M. PWR1 PWR2 Alarm Status Description Green Off Green Green Off Green Off Solid Red Blinking Red Off System is operating normally No Power / system crash / operation initiating Active when determining ring master Powered up Power down or not installed Powered up Power down or not installed Defined Major policies are detected Defined minor policies are detected Powered off or system operating normally Default Settings IP Address: Subnet mask: Default gateway: Username: Password: 192.168.1.1 255.255.255.0 192.168.1.254 admin admin Troubleshooting If no LEDs light, verify that the power supply connections are solid and that power is present on the output of the power supply. Use the LED table to verify that power is present, a link is established, data is being transmitted, and to verify port speed. If data does not pass and cable connections have been verified, contact your Network Administrator to validate that the network connection is good. The user manual can be found in the documentation and download section of the product web page. -- First, go to www.advantech-bb.com. -- Second, search for the model number. -- Finally, go to the documentation/download section of that product page to download files. Product Information MODEL # DESCRIPTION TEMP RATING SEG5204SFP-T 16 Port GbE + 4 GbE SFP Full L2 Industrial Managed Ethernet Switch -40 ~ 75°C Recommended Accessories MDR-40-24 Power Supply C5UMB3FBG Ethernet Cables QUICK START GUIDE SEG520- 4SFP-T Industrial Managed Ethernet Switch Before you begin, be sure you have the following: + Ethernet Switch + Din Rail Mount Bracket (Installed) + Wall Mount Bracket + Power Supply (Required not included) Document number SEG520-4SFP-T_0417qsg 1-888-948-2248 | Europe: +353 91 792444 advantech-bb.com 707 Dayton Road | PO Box 1040 | Ottawa, IL 61350 Phone: 815-433-5100 | Fax: 815-433-5109 www.advantech-bb.com | E-mail: support@advantech-bb.com https://manual-hub.com/ Fast and easy on the web: www.advantech-bb.com