DoorBird Gigabit High-PoE-Injector A1093

Installation Manual

Read these instructions carefully before starting to use any components. Keep the manual so you can refer to it at a later date if required. If you hand over the device to other persons for use, please hand over the operating manual as well.

Please observe the warnings and safety instructions in our accompanying booklet: https://www.doorbird.com/downloads/warnings.pdf

You can always find the most up-to-date version of the installation manual on www.doorbird.com/support. To make things easier, we use the term "device" for the product "Gigabit High-PoE-Injector A1093" and "mobile device" for a smartphone or tablet.

Liability

Every care has been taken in the preparation of this document. Please inform Bird Home Automation GmbH of any inaccuracies or omissions. Bird Home Automation GmbH cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Bird Home Automation GmbH makes no warranty of any kind with regard to the content of this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Bird Home Automation GmbH shall neither be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no components that require service by the user. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Symbols Used

• ⚠️ Danger: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
• ❗ Warning: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• ❗ Caution: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• ? NOTICE: Indicates a situation which, if not avoided, could result in damage to property.
• ℹ️ Important: Indicates significant information which is essential for the product to function correctly.
• ? Note: Indicates useful information which helps in getting the most out of the product.

Components

• 1x Gigabit High-PoE-Injector A1093
• 1x Installation manual
• 1x Power supply unit (mains adapter) with up to four country-specific adaptors
• 1x Screw connection terminal plug
• 1x Screw driver
• 2x Phillips countersunk head screws and dowels

Device Overview

The device features the following ports and indicators:

• 1) LAN in: RJ45 jack to connect a standard network cable (Cat.5e or better) from the Internet Router.
• 2) LAN / PoE out: RJ45 jack to connect a standard network cable (Cat.5e or better) going to the device to supply it with PoE and network data.
• 3) PWR LED: Power and diagnostic LED to display the current status of the device.
• 4) 48-57 V DC -/+, 1 A: Screw terminal plug for connecting the DoorBird power supply.
• 5) DIN rail connector: Connection for DIN rail clip for DIN rail mounting.
• 6) Wall mounting holes: Screws and dowels included.

Visual description of the device ports: A diagram shows a rectangular device with RJ45 ports labeled 'LAN IN' and 'LAN/PoE OUT', a terminal block labeled '48-57 V DC -/+', and indicator lights labeled 'PWR'. A DIN rail connector is visible on the side.

Installation

All steps should be carried out carefully by a competent adult, taking into consideration applicable safety regulations. Contact DoorBird directly or seek advice from a competent specialist if you have questions.

Ensure that all wires used for the installation are undamaged along their entire length and approved for this type of use.

Step 1: Switching Off Power

Switch off the power to all wires leading to the assembly location, e.g., the door chime, electric door opener, power supply unit for the device, etc.

Step 2: Determining the Assembly Location

The device is IP30 certified (not water-proof). Please make sure to place the device into a suitable, non-mobile radio interfering housing if you intend to use it outdoors.

The network cable between the device and the Switch/Internet Router can have a maximum length of 80 meters / 262 feet.

Step 3: Mounting the Device

The device can be mounted on the wall using the supplied wall mount holes, screws, and dowels, or on a DIN rail using the supplied DIN rail adapter.

Option 1: Wall Mounting

Ensure not to hit any objects (e.g., cables) when drilling the holes.

If the wall is not made of wood, drill dowel holes 5 mm (0.196 in) in diameter and insert the provided dowels. If the wall is made of wood, dowels are usually not required. Special dowels for insulating walls (e.g., Fischer insulating dowels) are available; consult your insulating material manufacturer for recommendations.

Visual description: A diagram shows drilling holes into a wall, inserting dowels, and attaching the device with screws.

Option 2: DIN Rail Mounting

The device can be mounted on a DIN rail. Use the DIN rail adapter on the back of the unit.

Visual description: A diagram shows the device being attached to a DIN rail via its adapter.

Step 4: Power Supply

The device can be powered using the enclosed DoorBird power supply unit. The device does not use battery power.

NOTICE: Disconnect all other DoorBird devices in the network from the power supply before commissioning the DoorBird Gigabit High-PoE-Injector A1093.

NOTICE: Do not plug the power supply unit into the wall socket yet. Only use the provided power supply unit or a separately available DIN rail power supply unit, as these are specially stabilized electrically and equipped with integrated audio interference reduction. Other power supply units may damage the device or cause poor transmission quality.

Step 5: Connecting the Device

Cables and wires can be connected conveniently and safely via the labeled screw connection terminals. Connect all necessary cables and wires to the device.

NOTICE: Please remove any cables and wires from the connection ports of the device that you do not need.

NOTICE: Please take care when connecting the cables and wires. Connecting them the wrong way may damage the device.

Step 6: Activating the Device

Plug the enclosed power supply unit (mains adapter) into a wall socket. Switch on the power leading to the assembly location.

You can check if the device is receiving power by observing the PWR LED, which lights up after the device is connected to power. If the PWR LED does not light up, please check the power supply and ensure the positive and negative poles are connected correctly.

PWR LED Status:

• Red: Power on, no PoE device connected.
• Blue: PoE IEEE 802.3af device connected.
• Green: PoE+ IEEE 802.3at device connected.

Technical Specifications

Legal Notes

General Remarks

• DoorBird is a registered trademark of Bird Home Automation GmbH.
• Apple, the Apple logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone and iPod touch are trademarks of Apple Inc.
• Google, Android and Google Play are trademarks of Google, Inc.
• The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
• QR Code is a registered trademark of Denso Wave Incorporated in Japan and other countries.
• All other company and product names may be trademarks of the respective companies with which they are associated.
• Bird Home Automation GmbH reserves the right to make changes to its products in the interest of technical advancement. Products shown may differ visually from delivered products due to ongoing enhancements.
• Reproduction or use of texts, illustrations, and photos from this manual in any media, even in excerpts, is only permitted with express written consent.
• The design of this manual is subject to copyright protection. No liability is accepted for errors, inaccuracies, or printing errors (including technical data, graphics, or sketches).
• DoorBird products comply with all applicable technical guidelines, electrical, and telecommunications regulations in Germany, the EU, and the USA.
• DoorBird products and their components (ICs, software, etc.) are intended for civilian, non-military use only.

Data Privacy and Data Security

• For maximum security, the device uses the same encryption technologies as online banking. No port forwarding or DynDNS is used for security.
• The data center location for remote access via an app is mandatory in the EU if the device's determined Internet IP address is within the EU. The data center operates under the most stringent security standards.
• Video, audio, and other surveillance methods may be regulated by country-specific laws. Check your local region's laws before installing and using this device for surveillance.
• For door stations, indoor stations, or cameras: In many countries, video and audio signals may only be transmitted after a visitor has rung the bell (data privacy, configurable in the app).
• Mount the device so that the camera's detection range is limited exclusively to the immediate entrance area.
• The device may include a visitor history and motion sensor. These functions can be activated/deactivated as needed.
• If necessary, indicate the presence of the device appropriately.
• Observe all country-specific statutory regulations concerning the use of surveillance components and cameras applicable at the installation site.
• Check with the property owner and your house community regarding permission to install and use this product. Bird Home Automation GmbH is not responsible for misuse or misconfiguration of this product, including unauthorized door opening.
• Bird Home Automation is not liable for damages caused by improper existing or new installations.
• Software and operating system updates (firmware updates) are generally installed automatically via the Internet if technically possible. Automatic firmware updates ensure products operate reliably, safely, and efficiently. Features may be added, extended, or slightly changed over time. Major changes or limitations to existing features will occur if Bird Home Automation GmbH deems it necessary (e.g., for data protection, security, or stability reasons). Firmware updates are distributed automatically to compatible products connected to the Internet or Bird Home Automation GmbH servers. This process is gradual and may take several weeks. Installed firmware updates cannot be undone. Customers cannot deny automatic updates if the product is connected to the Internet or Bird Home Automation GmbH servers.

Publisher

Bird Home Automation GmbH
Uhlandstraße 165
10719 Berlin
Germany

Web: www.doorbird.com
Email: hello@doorbird.com

This manual may contain typographical or printing errors. Information is regularly reviewed, and corrections will be made in future versions. No liability is accepted for technical or printing errors and their consequences.

EU Declaration of Conformity

Manufacturer: Bird Home Automation GmbH, Uhlandstr. 165, 10719 Berlin, Germany

Brand: DoorBird

Product: Gigabit High-PoE Injector

Type number: A1093

Intended purpose: PoE Injector

Bird Home Automation GmbH declares under its sole responsibility that the referenced product complies with the following directives:

• Directive: 2014/53/EU Radio Equipment Directive (RED), 2011/65/EC RoHS 2 Directive
• Health & Safety (Art. 3.1.a): IEC 62321-1:2013, IEC 62321-2:2021, IEC 62321-3-1:2013, IEC62321-4: 2013+A1:2017, IEC 62321-5:2013, IEC 62321-6:201, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-8:2017, EN IEC 62368-1:2018, EN IEC 62368-1:2020+A11:2020
• EMC requirements (Art. 3.1.b): EN IEC 61000-3-2:2019/A1:2021, EN 61000-3-3:2013/A2:2021, EN 55032:2015/A1:2020, EN 55035:2017/A11:2020

The CE symbol confirms that this product conforms with the above mentioned norms and regulations.

Conformity was assessed with included accessories/components and current officially approved software. Conformity cannot be guaranteed if other accessories/components or unapproved software are used.

Submitted by:

Berlin, November 02nd 2023
Xenios Maroudas
Director Product & Innovations

Recycling Information

Visual description: Icons indicating that the device can be recycled and should be deposited at a store or recycling center. A web address for collection points is provided.

Part of ASSA ABLOY

www.doorbird.com