Rexing FMT2 FM Transmitter User Manual

Overview

Thank you for choosing REXING!

We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.

? care@rexingusa.com

? (877) 740-8004

Our support team will respond you as soon as possible. Always a surprise in Rexing.

Check us out here.

• [Facebook] https://www.facebook.com/rexingusa/
• [Instagram] https://www.instagram.com/rexingdashcam/
• [Website] https://www.rexingusa.com/support/registration/

[Social Media Links: Facebook, Instagram, Website, Product Support]

Product Overview

The Rexing FMT2 FM Transmitter features the following components:

What's in the Box?

The package includes the following items:

• 1. FM Transmitter (FMT2)
• 2. User Manual
• 3. Air Vent Bracket
• 4. 3.5MM Audio Cable
• 5. 4A Fuse (see replacement instructions on page 9)

Features

The FMT2 allows you to adjust the local channel to match your car radio for consistent audio transmission. It supports music playback from an SD card to car speakers and charges mobile phones and other smart devices. The Bluetooth hands-free call function enables calls through your car audio system. Activating the noise canceling button during high-speed operation helps eliminate road, wind, and environmental noise for a high-definition call experience.

Specifications

• Bluetooth Version: V5.0
• Product Name: FMT2
• Working Range: 16.5 FT
• Memory Card Format and Capacity: Micro SD card, supports up to 64GB
• FM Frequency Range: 87.5MHz-108.0MHz
• Compatible Audio Format: MP3, WMA, WAV, FLAC, APE
• Compatible with Bluetooth Protocol: A2DP/AVRCP/HSP/HFP
• Orange Fast Charging Port: Supports QC3.0 Protocol (DC 3.6-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A)
• Type-C Port Support: PD3.0 (20W) charging protocol

Getting Started

Product Installation

1. Put the threaded knob on the end of the air vent bracket.
2. Insert the air vent bracket into the round hole at the back of the main unit.
3. Tighten the thread.
4. Open the air vent bracket and insert it into the car air-conditioning air vent grille. Tighten the screws to secure it, adjust the angle of the FM transmitter, and then use it.

[Image Description: A diagram showing the FM transmitter mounted on a car air vent, with the device displaying "106.2" and the knob labeled 'CH'.]

Power ON/OFF

Turn on: Insert the FMT2 into the cigarette lighter hole of the car. After the car is started, the blue display will automatically turn on and flash once per second. If it is off, long press the [button-power] for 3 seconds to turn on the device.

Shutdown: Cut off the power to shut down or long press the [button-power] for 3 seconds to shut down when there is power.

Note: Even if the device is turned off, the charging port can still work normally.

Screen Display

1. After power on, the blue display will show Bluetooth and frequency flashing alternately.
2. After pairing is successful, the screen displays a Bluetooth icon.
3. Long press the [button-FM/mode] to enter the frequency modulation mode (displaying digital frequency).

Basic Operations

FM/Bluetooth Pairing

Note: To enjoy higher-quality music, adjust the car radio to a blank frequency (a channel without local broadcast) that matches the transmitter's frequency. Ensure this frequency is consistent each time you use the device.

FM Pairing

1. Turn the car radio to a blank frequency point (a channel without any broadcasting), identifiable by clear rustling.
2. Long press the [button-FM/mode] button; the number flashes, indicating FM pairing mode. Turn the knob left/right to increase/decrease frequency. Adjust it to match the car radio's frequency (e.g., FM88.8). Click the [button-FM/mode] button again or wait for 3 seconds to exit FM pairing mode.

Bluetooth Pairing

1. After power on, the FMT2 screen displays "HI", then the current car battery voltage. After 2 seconds, it enters Bluetooth state, indicating it's ready for pairing.
2. Turn on Bluetooth on your smart device, search for "FMT2", and connect. After connecting, the screen will display a Bluetooth icon, and you can play music via Bluetooth. The connection usually pairs automatically, but may prompt for a password. If prompted, enter the initial password "0000".

Note: On subsequent uses, the FMT2 will automatically connect to the last connected device.

[Image Description: A diagram showing a car radio interface with various buttons and a display showing "106.2 FM", along with icons for AUX, PREV, NEXT, REV, FWD, SIDE.]

Bluetooth Hands-Free Function

• Answer the call: Click the [button-play-pause/answer] button.
• Hang up the call: Click the [button-play-pause/answer] button.
• Reject the call: Long press the [button-reject] button for 2 seconds.
• Switch private calls: Press and hold the [button-play-pause/answer] button for 2 seconds during the call.

Music Function

Audio source: Bluetooth/Micro SD Card. Music sound effect: default stereo sound effect playback.

• Micro SD Card Mode: Insert a Micro SD card containing MP3 / WMA / APE / FLAC / WAV / APE files into the transmitter. The transmitter will automatically start playing the files. When an incoming call occurs, the device will automatically switch to the call.
• Bluetooth Mode: Refer to your smart device's instructions. After a successful Bluetooth connection, music from your smart device can be played and synchronized to the car's built-in speaker.

Note: To ensure a better product experience, please select only one audio source at a time.

Audio Source Selection

• The device will recognize the last connected device (Bluetooth or Micro SD Card) to play by default.
• Auto play option via Micro SD Card: Plug and play.
• After power off or restart, the FMT2 will enter the previous play mode (automatically play music in Micro SD Card mode; manual play is required in Bluetooth mode).

Audio Playback Operation

• Play/Pause: Click the [button-play-pause/answer] button.
• Previous/Next: Short press the [button-previous] button to play the previous song, short press the [button-next] button to play the next song.

Switching the Music Playing Mode

In music play mode, long press the [button-mode-switch] button for 2 seconds to switch between list loop play, single loop play, random play, and other play modes.

Advanced Features

High-speed Noise Cancellation

• During a call, click the [button-noise-cancel] button to enter high-speed noise cancellation mode. A "Dingdong" voice prompt will indicate activation. This suppresses ambient noise in the car, providing a clear and interference-free call experience for the recipient.
• Click the [button-noise-cancel] button again to exit high-speed noise cancellation mode.

QC3.0 Charging Port

• The output power is 18W, compatible with FCP/QC3.0/QC2.0/BC1.2/DCP, etc.
• Smart devices supporting QC3.0 fast charge will meet the QC3.0 fast charge protocol: DC 3.6-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A.

Type-C Charging Port

• Output power is 20W, supporting PD3.0 fast charging protocol.
• Smart devices supporting PD3.0 protocol will meet DC 5V/3A, 9V/2.22A, 12V/1.67A output.

Voice Assistance

• Supports Siri and Google Assistant voice assistant wake-up.
• Press and hold the [button-Siri/voice-assist] button for 2 seconds to wake up the voice assistant while connected via Bluetooth.

Road Noise Reduction

[Image Description: A close-up view of the top of the FMT2 device, highlighting the microphone and the aluminum knob labeled 'CH'.]

• Adjust the direction of the microphone until it is directly facing the driver.
• Press the [button-noise-reduce] button during the call. When you hear a tone, the road noise reduction mode is activated.

Fuse Replacement

The FMT2 features:

• Highly developed security.
• Innovative fuse tube design and replaceability.
• Protection for your car and car charger in case of overcurrent.
• Comes with a 4A fuse replacement.

[Image Description: A diagram illustrating the process of replacing the fuse, showing the screw, fuse, rubber gasket, and metal tip screws.]

Detailed Accessories

• Metal washers
• Fuse
• Rubber gasket
• Metal tip screws

How to install the fuse?

1. Rotate the screw on the bottom of the Bluetooth FM transmitter counterclockwise.
2. Insert the fuse into the screw hole with the metal tip; the metal on the edge of the fuse will attach to the metal tip.
3. Assemble the rubber gasket.
4. Assemble the metal gasket.
5. Turn the screw clockwise to the bottom of the Bluetooth FM transmitter.

Frequently Asked Questions

1. Noise issues

Solution:

• a. Reduce the speaker volume by one third and increase the volume of the smart device.
• b. Signal interference: Please switch to another empty white frequency point.
• c. Plug and unplug the machine again to restore the initial state and work again.

2. The other party cannot hear you during a call.

Reason 1: The dialing method is wrong.

Solution:

• a. When a call comes in, click the [button-play-pause/answer] button to answer the call through the car speaker.
• b. Activate the phone speaker to answer the call.

Reason 2: The call volume is low.

Solution:

• a. Increase the volume of the phone.
• b. The volume of the other party is too low during the call; ask the other party to increase their volume.

Reason 3: The microphone is broken.

Suggestion: Contact customer service for help.

Warranty & Support

Warranty

The Rexing FMT2 FM transmitter comes with a full 12-month warranty. If you register your product on the official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months.

Support

If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.

Your opinion matters

Rexing is committed to continuously improving its products, services, and user experience. We welcome your constructive feedback and suggestions on how we can do even better.

Connect with us today at care@rexingusa.com.

Thank you for choosing Rexing!

FCC ID

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[Logos: FC, ROHS, CE]

MADE IN CHINA