Outsunny 4-Seater Rattan Set Assembly Instructions
Model: 860-319V70
Important Information
EN: IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
FR: IMPORTANT: A LIRE ATTENTIVEMENT ET A CONSERVER POUR VOUS Y REFRERER ULTERIEUREMENT.
ES: IMPORTANTE, LEA DETENIDAMENTE Y GUARDE PARA FUTURAS REFERENCIAS.
PT: IMPORTANTE, GUARDE PARA FUTURA REFERÊNCIA, LEIA ATENTAMENTE.
DE: WICHTIG! SORGFÄLTIG LESEN UND FÜR SPÄTER NACHSCHLAGEN AUFBEWAHREN.
IT: IMPORTANTE, LEGGERE E CONSERVARE QUESTO MANUALE D'ISTRUZIONE PER UN USO FUTURO.
General Advice:
- For optimal performance, place the furniture on a flat, stable surface.
- Install chairs under a shelter.
- Keep away from open flames and heat sources.
- Do not hang anything on the structure.
- Avoid overloading the anchors/structure.
- It is advised not to stay on the furniture during storms.
- Do not use in adverse weather conditions and cover furniture when not in use.
Precautions Before Assembly
- Prepare a clean and dry assembly area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly remove leaves and/or water collected on the fabric.
- Check the chair fabric regularly.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Maintenance (Fabric Care)
- Do not use this product if the seat cloths, cloth cushion or tarpaulins are ageing, and contact customer service.
Caution
- Caution with the risks of pinching or cuts during assembly.
- The manufacturer declines all responsibility in case of damages due to bad installation or due to weather.
Parts List
Packing Details: Total 2 Boxes
Box 1/2:
| Part No | Part Image | Qty |
|---|---|---|
| B | [Side Panel] | 1 |
| F | [Back Panel] | 1 |
| H | [Base Frame] | 1 |
| J | [Cross Brace] | 1 |
| M | [Support Bar] | 1 |
| N | [Seat Cushion] | 2 |
| O | [Armrest Cushion] | 3 |
| Hardware Kit |
Box 2/2:
| Part No | Part Image | Qty |
|---|---|---|
| A | [Front Panel] | 1 |
| C | [Corner Support] | 1 |
| D | [Leg Frame] | 4 |
| E | [Top Panel] | 1 |
| G | [Back Support] | 1 |
| I | [Seat Frame] | 1 |
| K | [Base Frame] | 4 |
| L | [Base Frame] | 4 |
| V | [Foot] | 2 |
Hardware List:
| Part No | Part Image | Qty |
|---|---|---|
| A | [Panel] | 1 |
| B | [Panel] | 1 |
| C | [Frame] | 1 |
| D | [Frame] | 4 |
| E | [Panel] | 1 |
| F | [Panel] | 1 |
| G | [Support] | 1 |
| H | [Panel] | 1 |
| I | [Frame] | 1 |
| J | [Frame] | 1 |
| K | [Frame] | 4 |
| L | [Frame] | 4 |
| N | [Cushion] | 2 |
| O | [Cushion] | 3 |
| R | [Bolt M6x50] | 20 (+1 spare) |
| S | [Bolt M6x35] | 20 (+1 spare) |
| T | [Bolt M6x50] | 2 |
| U | [Washer] | 20 (+1 spare) |
| V | [Nut] | 20 (+1 spare) |
| W | [Screw M4x12] | 36 (+1 spare) |
| X | [Screw M4x12] | 22 (+1 spare) |
| Y | [Screw M4x16] | 20 (+1 spare) |
| Z | [Screw M4x16] | 22 (+1 spare) |
Assembly Instructions
General Assembly Notes:
- Please confirm that all components are present before beginning assembly.
- For the protection of your furniture, place all parts on a clean and smooth surface to prevent any damage.
- Please assemble the furniture by 2 persons or more.
- Do not confuse similar screws.
- Do not tighten bolts fully until all parts are connected!
- Please periodically check all fittings and re-tighten as necessary.
Step 1: Attach part T to part B using screws.
Step 2: Assemble the base frame using parts A, B, C, D, W, Y, and Z. Follow the diagrams carefully, ensuring correct alignment and screw usage.
Step 3: Continue assembling the frame structure using parts A, B, C, D, E, F, G, W, X, Y, and Z as shown in the diagrams. Pay attention to the quantities of each part and screw type.
Step 4: Assemble the corner seat module using parts A, C, D, E, G, R, U, and V. Ensure all bolts and washers are correctly placed.
Step 5: Assemble the single seat module using parts O and N.
Step 6: Assemble the armrest panel using part F and T.
Step 7: Assemble the side panel structure using parts E, F, G, W, Y, and Z.
Step 8: Assemble the back support structure using parts E, F, G, W, Y, and Z.
Step 9: Assemble the seat frame using parts I, D, W, X, and N.
Step 10: Assemble the base frame using parts H, D, W, Y, and Z.
Step 11: Assemble the seat frame using parts I, D, H, W, X, and N.
Step 12: Assemble the base frame using parts K, L, J, W, X, and M.
Step 13: Assemble the corner seat module using parts K, L, W, X, and J.
Step 14: Assemble the base frame using parts K, L, W, X.
Step 15: Assemble the corner seat module using parts K, L, U, V, R, and E.
Step 16: Assemble the ottoman using parts N and K, L, X, W.
Step 17: Assemble the base frame using parts K, L, M, W, X.
Step 18: Assemble the corner seat module using parts K, L, W, X.
Step 19: Assemble the final configuration of the rattan set by connecting the assembled modules.
Step 20: Attach the cushions (N and O) to the assembled frame.
Step 21: The final assembled product is a 4-seater rattan set with an ottoman.
Contact Information & Importers
US Importer: Aosom LLC, 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA
CA Importer: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
UK Importer: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH
DE Importer: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany
FR Importer: MH France, 2, rue Maurice Hartmann, 92130 Issy-les-Moulineaux, France
IT Importer: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
ES/PT Importer: SPANISH AOSOM, S.L., C/ ROC GROS, N° 15. 08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
Customer Service Contact Details:
| Country | Phone | |
|---|---|---|
| UK | 0044-800-240-4004 | enquiries@aosom.co.uk |
| DE | 0049-0(40)-88307530 | service@aosom.de |
| FR | 0033-1-84166106 | aosom@mhfrance.fr |
| ES | 0034-931294512 | atencioncliente@aosom.es |
| PT | 0034-931294512 | info@aosom.pt |
| IT | 0039-0249471447 | clienti@aosom.it |
| US | 001-877-644-9366 | customerservice@aosom.com |
| CA | 416-792-6088 | customerservice@aosom.ca |
