Outsunny 860-389V00 Modular Garden Furniture
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Product Information
Model Number: 860-389V00
Maximum Weight Capacity: 120 kg
Estimated Assembly Time: 120 MIN
This product is intended for domestic use only.
Parts List
| A | 1 |
| B | 1 |
| C | 1 |
| C1 | 1 |
| D | 16 |
| E | 2 |
| F | 4 |
| M | 1 |
| N | 1 |
| P | 1 |
| Q | 1 |
| T | 1 |
Hardware List
| G (M6*12) | 64 (+1 spare) |
| H (M6*35) | 4 (+1 spare) |
| J (M6*40) | 10 (+1 spare) |
| K (M6) | 78 (+1 spare) |
| L | 1 |
Assembly Instructions
Note: Do not confuse similar screws. Do not tighten bolts fully until all parts are connected.
Step 1
Attach part C1 to part N using 2x J and 2x K screws.
Step 2
Attach part M to the structure using 3x J and 3x K screws.
Step 3
Attach part D to the structure using 16x G and 16x K screws.
Step 4
Connect part H to the frame using 2x K screws.
Step 5
Place cushion E onto the frame.
Step 6
Place cushion F onto the frame.
Step 7
Attach part C to part B using 2x J and 2x K screws.
Step 8
Attach part A to the structure using 3x J and 3x K screws.
Step 9
Attach part D to the structure using 16x G and 16x K screws.
Step 10
Connect part H to the frame using 2x K screws.
Step 11
Place cushion E onto the frame.
Step 12
Place cushion F onto the frame.
Step 13
Attach part Q to the structure using 16x G and 16x K screws.
Step 14
Assemble the coffee table structure.
Step 15
Attach part P to the structure using 16x G and 16x K screws.
Step 16
Place cushion T onto the coffee table structure.
Usage Tips
- Place the furniture on a flat floor for optimal performance.
- Mount the garden chairs under a shelter.
- Keep away from open flames.
- Do not hang anything on the structure.
- Avoid overloading the anchors/structure.
- It is advised not to stay on the furniture during a storm.
- Do not use in adverse weather conditions and cover the furniture when not in use.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly remove leaves and/or water collected on the fabric.
- Check the furniture regularly.
- Do not use this product if the seat cloths, cushions, or tarpaulins are ageing. Contact customer service immediately.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Caution
Be careful of pinching or cutting hazards during assembly. The manufacturer declines all responsibility for damages due to improper installation or weather conditions.
Contact Information
For any questions, please contact the customer care center. Details are provided in multiple languages on the last page of the original document.
