Outsunny 5 Piece Garden Furniture Set
Model: 84G-732V00 | Part Number: IN241200375V01_GL
Assembly Instructions
Product Overview
This document provides assembly instructions for the Outsunny 5 Piece Garden Furniture Set. The set includes one round table and four chairs. The maximum weight capacity for each chair is ⚖️ 120 kg. The estimated assembly time is ⏱️ 60 minutes.
Important Notes:
- Retain this document for future reference.
- For domestic use only.
- Assembly requires at least 2 persons.
- Ensure all parts are present before assembly.
- Assemble on a clean, smooth surface to prevent damage.
- Do not overtighten screws until all parts are connected.
- Periodically check and re-tighten fittings.
Packing Details
The set is packed in 2 boxes.
Box 1/2
| No. | Parts | Qty |
|---|---|---|
| A | L-shaped bracket | 8 |
| B | Curved bar | 4 |
| C | Curved bar | 4 |
| D | Rectangular seat support | 4 |
| E | Square frame | 4 |
Box 2/2
| No. | Parts | Qty |
|---|---|---|
| F | Table top half | 1 |
| G | Table top half | 1 |
| H | Chair leg | 4 |
| J | Table base/support structure | 1 |
| Hardware Kit | 1 |
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| A | L-shaped bracket | 8 |
| B | Curved bar | 4 |
| C | Curved bar | 4 |
| D | Rectangular seat support | 4 |
| E | Square frame | 4 |
| F | Table top half | 1 |
| G | Table top half | 1 |
| H | Chair leg | 4 |
| J | Table base/support structure | 1 |
Hardware List
| ID | Description | Quantity |
|---|---|---|
| L | Flat connector | 2 |
| M | Screw (M6*15) | 13 (+1 spare) |
| N | Screw (M6*25) | 8 (+1 spare) |
| P | Screw (M6*30) | 24 (+1 spare) |
| Q | Screw (M6*35) | 4 (+1 spare) |
| R | Screw (M6*50) | 24 (+1 spare) |
| S | Washer (M6) | 93 (+3 spare) |
| T | Nut (M6) | 20 (+1 spare) |
| U | Wrench | 1 |
| V | Allen key | 1 |
Assembly Instructions
Step 1: Assemble Chair Frames
For each of the four chairs, attach part A (L-shaped bracket, x8) to part D (Rectangular seat support, x4) using R (M6*50 screw, x4) and S (M6 washer, x8), and T (M6 nut, x4). Ensure the parts are aligned correctly.
Step 2: Attach Seat Supports and Frames
Attach part E (Square frame, x4) to the chair legs using parts B (Curved bar, x4) and C (Curved bar, x4). Secure these components using P (M6*30 screw, x4) and S (M6 washer, x4) for each chair. Repeat this process for all four chairs.
Step 3: Attach Backrests
Connect the backrest frame to the assembled seat frame. Use R (M6*50 screw, x2) and S (M6 washer, x4) along with P (M6*30 bolt, x2) for each chair. Ensure the backrest is securely fastened.
Step 4: Completed Chair
A fully assembled chair is shown. Ensure all connections are firm.
Step 5: Assemble Table Top
Join the two table top halves, F (x1) and G (x1), using L (Flat connector, x2). Secure the table top structure using M (M6*15 screw, x5), Q (M6*35 screw, x4), S (M6 washer, x13), and T (M6 nut, x4).
Step 6: Attach Table Legs
Attach the four table legs, H (x4), to the table base/support structure, J (x1). Use N (M6*25 screw, x8) and S (M6 washer, x8) to connect the legs to the base.
Step 7: Secure Table Legs
Further secure the table legs to the table base. Use M (M6*15 screw, x8) and S (M6 washer, x8) for additional stability.
Step 8: Final Assembly
The complete 5-piece garden furniture set, consisting of the assembled table and four chairs, is now ready.
