Birdfy Hum Feeder User Manual
Catalog
- What's in the Box: 1-4
- About the Product: 5-6
- Charging: 7-9
- Downloading the Birdfy App: 10-12
- Outdoor Installation: 13-15
- Adding Nectar: 16-17
- Cleaning: 18-20
- Support: 21-24
- The Birdfy Community: 25-26
- Warning: 27-30
What's in the Box
The Birdfy Hum Feeder package includes:
- User Manual
- Quick Start Guide
- Feeder + Camera
- Accessory box containing:
- Mini brush
- S hook
- Charging cable
- Ejector pin
- Solar panel*
- Ant moat for solar panel*
*Please be aware that the contents of your package may vary depending on the specific bundle you have chosen. The parts marked with an asterisk (*) may or may not be included.
About the Product
The Birdfy Hum Feeder features:
- 1 Ant moat: Trampa para hormigas / Pare-fourmis
- 2 Camera: Cámara / Cámara / Caméra
- 3 Feeding ports: Puertos de alimentación / Portes d'alimentation
- 4 Base: Base / Base / Base
- 5 Microphone: Micrófono / Micrófono / Microphone
- 6 PIR sensor: Sensor PIR / Sensor PIR / Capteur PIR
- 7 Power button: Botón de encendido / Bouton d'alimentation
- 8 Charging port: Puerto de carga / Port de charge
- 9 Reboot hole: Orificio de reinicio / Trou de redémarrage
- 10 Status light: Luz de estado / Le voyant d'état
Charging
Fully charge the camera before use. The camera does not come fully charged due to safety regulations. Before using it for the first time, please charge it for 10 hours with the charging cable inside the box (DC5V / 1A).
Status Light Guide:
| Status Light | Description |
| Solid red (Rojo fijo / Rouge fixe) | Charging (Cargando / En charge) |
| Off (Apagado / Éteint) | Fully charged (Completamente cargado / Complètement chargé) |
| Solid blue (Azul fija / Bleu fixe) | Working (Funcionando / En fonctionnement) |
| Flashing blue (Azul intermitente / Bleu clignotant) | Wi-Fi Config Mode (Modo de configuración de Wi-Fi / Mode de configuration Wi-Fi) |
Important: When charging, both the ambient temperature and camera temperature should be above 32°F (0°C). If the camera has been exposed to low temperatures for an extended period, it should be brought back to room temperature before charging.
Downloading the Birdfy App
Follow the in-app instructions to set up your Birdfy.
- Download and open the app.
- Turn on the camera.
- Pair the camera with the app via Bluetooth.
Bird Identification:
- If you have the Birdfy Hum Feeder with Lifetime Free AI, the AI bird identification feature is included and activated automatically, no further action needed.
- If you have the Birdfy Hum Feeder with AI by Subscription, you need to subscribe on my.birdfy.com to access this feature.
Outdoor Installation
Instructions for outdoor installation are provided through diagrams showing how to hang the feeder using the S hook.
Ant Moat for Solar Panel
Instructions for installing the ant moat for the solar panel are provided through diagrams.
*Skip this part if you don't have the solar panel.
Adding Nectar
Diagrams illustrate the process of adding nectar to the feeder.
Cleaning
Diagrams illustrate the cleaning process for the Birdfy Hum Feeder.
Support
Birdfy Help Center:
We are dedicated to offering top-notch products and services to our customers. Should you encounter any issues with your Birdfy, please don't hesitate to reach out to us.
- Email: support@birdfy.com
- Phone: 1(866)749-0567 (Mon - Fri, 9am-5pm, PST)
- In-App Live Chat
Troubleshooting:
If your Birdfy camera goes offline or fails to stream, try these troubleshooting steps:
- Ensure the camera is fully charged.
- Verify your home Wi-Fi connectivity. Try to reconnect the camera to your Wi-Fi network.
If the issue persists:
- Disconnect the camera from the solar panel or charger.
- Use the provided ejector pin or a paperclip to press the reboot hole to power down the camera entirely.
- Press and hold the power button for 3 seconds to restart the camera.
The Birdfy Community
Scan the QR code to join our vibrant Facebook community and connect with fellow bird enthusiasts! Discover valuable insights on birdwatching and bird feeding techniques, exchange your finest Birdfy captures, and witness exotic birds from around the world!
Follow us on social media: @birdfy by netvue
Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications made without explicit approval from the responsible party in compliance may result in the user being unauthorized to operate the device.
This device meets the FCC radiation exposure limits for uncontrolled environments. To ensure safe installation and operation, maintain a minimum distance of 20cm between the radiator and your body.
FCC ID: 2AO8RNI-8511
CE Statement: The structure of the product allows it to be used in at least one member state without violating applicable requirements for the use of radio spectrum.
IC Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
NETVUE INC.
1055 East Colorado Boulevard 5th Floor
Pasadena, CA, 91106
