Xiaomi Redmi AirDots User Manual Guide

Charging:

1. Remove product from packaging and all the protective tape and stickers.
2. Place earphones back in the charging case and plug in USB to allow to charge for an hour or so. The case and earphones should light red when charging. Red also indicates disconnection from Bluetooth.
3. A white light when taken out of the box means it is connected to the mobile phone's Bluetooth. A white light in the charging box that turns off after a minute indicates the earphones are fully charged.

Set up and Pairing:

1. Once charged, remove the earphones from the charging box; they will turn on automatically.
2. Turn on Bluetooth and search for “Redmi AirDots_R” or “Redmi AirDots_L” depending on which earphone you take out to pair. If they do not appear, refresh the Bluetooth device list and search again. The other earphone should connect automatically.
3. To pair only one earphone (singular), take out the earphone. The white light will flash quickly for about 4–5 seconds. Once the white light starts to flash slowly, check the Bluetooth device list on your smartphone and pair it. This works for either earphone.

Turning on/off the earphones:

1. To turn an earphone on, press the multi-function key for about 1–2 seconds.
2. To turn off the earphone, place it back in the charging box or press the multi-function key for about 5 seconds until the white light turns red and then off.

The multi-function key is located on the earbud.

Operation:

1. Call function (answer, hang up or reject call):

   • Incoming calls: Press the multifunction key (on the earbud) to answer the phone.
   • Press the multifunction key again to hang up.
   • Reject the call by pressing and holding the multifunction key for a few seconds.

2. Music or video:

   • To pause or play the music/video while it is running, press the multi-function key.

3. Voice assistant:

   • To turn on the voice assistant, double-click the multi-function key.
   • Supports Xiaomi voice control, Siri, and Google Assistant.
   • The phone needs to support voice control to enable this feature.

Airdots Headset reset:

• Reset is generally used if the product cannot connect successfully.
• Press the multi-function key on both Left and right earphones for 15 seconds until the red and white lights flash alternately for 3 times, then turn off.
• Remove or unpair the Xiaomi Redmi AirDots from your smartphone's Bluetooth device list and delete the connection record, then refresh.
• Reset is successful, and the device is ready to start the pairing process again.