MoesGo MS-104Z ZigBee+RF Switch Module

Introduction

Global international operation: Whenever & Wherever You are, All-in-one Mobile App.

• Schedule timer
• Voice control - works with Google Assistant
• Voice control - works with Amazon Alexa
• Device Sharing

System Overview and Operation Modes

ZigBee Mesh Network

The device operates within a ZigBee Mesh network, requiring a ZigBee gateway hub for connectivity. This allows for reliable communication and extended range among connected devices.

In-house Local Operation

Local control is available through the mobile app, voice commands, traditional rocker switches, or push wall switches (reset switches).

Installation

Warnings ⚠️

• This is a Zigbee smart module switch that must be used under a Zigbee gateway hub connected with the Zigbee protocol.
• Installation must be carried out by a qualified electrician in accordance with local regulations.
• Keep the device out of the reach of children and away from water, damp, or hot environments.
• Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, resulting in abnormal operation of the device.
• Obstructions by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
• Do NOT attempt to disassemble, repair, or modify the device.

Mounting Clip

A mounting clip is provided for installation.

Wiring Diagrams

1. With one switch

Connects Line (L), Neutral (N), the light fixture, and a single light switch to the module's terminals (S1, L1).

2. Without switch

Connects Line (L), Neutral (N), and the light fixture directly to the module. Control is managed via app or voice commands.

3. With 2 Way switches

Illustrates wiring for a 2-way switching setup, connecting two switches, Line (L), Neutral (N), and the light fixture to the module's terminals.

4. With Wall Socket

Shows how to wire the module to control a wall socket, connecting Line (L), Neutral (N), and the socket terminals.

Wiring Instructions

1. Turn off the power supply before carrying out any electrical installation work.
2. Connect wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Connect the power supply and follow switch module configuration instructions.

Notes: Put your smartphone close to the switch module when you're configuring, and make sure you have min. 50% Wi-Fi signal ?.

Technical Specifications

Frequently Asked Questions (FAQ)

Q1: What should I do if I can't configure the switch module?

1. Please check whether the device is powered on.
2. Make sure your mobile and Zigbee gateway hub are under the same 2.4GHz WiFi network ?.
3. Check if the internet connection is stable.
4. Ensure the password entered in the App is correct.
5. Make sure the wiring is correct.

Q2: What device can be connected to this Zigbee switch module?

Most household electrical appliances can be connected, such as lamps, laundry machines, coffee makers, etc.

Q3: What happens if the WiFi goes off?

You can still control the device connected to the switch module with your traditional switch. Once WiFi is active again, the devices connected to the App will reconnect automatically for normal control.

Q4: What should I do if I change the WiFi network or change the password?

You have to re-connect your Zigbee gateway hub to the new WiFi network according to the App User Manual.

Manual Override

The Zigbee switch module terminal reserves the access of manual override function for the end-user to switch on/off. This allows for permanent on/off function.

Notes:

• Both the adjustment on the App and the switch can be reset; the last adjustment remains in memory.
• The App control is synchronized with the manual switch.

App User Manual

iOS App / Android App: Scan the QR code [QR code for Smart Life App download] to download the Smart Life App, or search for "Smart Life" in the App Store or Google Play to download the app.

Pairing and Clearing RF Code

1. How to pair the RF code

1.1 For reset switch:

Press the switch 5 times to hear beep sounds as Di-Di (2 times) for successful pairing.

1.2 For rocker light switch:

Press the switch 10 times (ON/OFF cycle for 5 times) to hear beep sounds as Di-Di (2 times) for successful pairing.

1.3 For reset button:

Long press the button on the module to hear beep sounds as Di-Di (2 times) for successful pairing.

2. How to clear up the RF code

2.1 For reset switch:

Press the switch 5 times to hear beep sounds as Di-Di (2 times), and then press the switch 5 times again after 5 seconds to hear beep sounds as Di-Di-Di-Di (4 times) for successful clearing.

2.2 For rocker light switch:

Press the switch 10 times (ON/OFF cycle for 5 times) to hear beep sounds as Di-Di (2 times), and then press the switch 10 times (ON/OFF cycle for 5 times) again after 5 seconds to hear beep sounds as Di-Di-Di-Di (4 times) for successful clearing.

2.3 For reset button:

Long press the button on the module to hear beep sounds as Di-Di (2 times), release your finger for 5 seconds, and long press the button again to hear beep sounds as Di-Di-Di-Di (4 times) for successful clearing.

Multi-Control Association

Note: Please confirm you have successfully finished the ZigBee link method above for adding this switch to your Smart Life App before proceeding with association.

Step 1: Add another smart switch

In the Smart Life/Tuya App, add another smart switch. If a smart switch has already been added, proceed to the next step. Note: The newly added switch does not need to be wired to the light; only Line (L) and Neutral (N) connections are required.

Step 2: View devices in the app

You will see two devices in the app. Click the main switch (e.g., a One Gang Switch) to enter the next operation.

Step 3: Initiate Multi-Control Association

Click the icon in the upper right corner ⬆️, select "Multi-Control Association", and then click "+" in the right corner ➕.

Step 4: Select switches for association

Choose the switch you want to associate and then select the switch button that you want to control the same light.

Step 5: Verify association

Return to the previous page. You will see two items: your main switch and the associated switch. Note: Please confirm the associated switch is enabled ✔️.

Step 6: Control light with multiple switches

You can now control your light with two switches. Do not associate another button on the same switch for multi-control.

Step 7: Add more switches

If you want to add a third or more smart switches to control your light, repeat the steps above. The result will show the newly associated switch.

Support and Contact

Thank you for your support and purchase at MoesGo. We are always here for your complete satisfaction. Please feel free to share your great shopping experience with us.

If you have any other needs, please do not hesitate to contact us first; we will try to meet your demand.

Support: service@moesgo.com

YUEQING NOVA ELECTRONICS CO.,LTD

Address: Qianhengcun, Liushi Town, Yueqing, Zhejiang, China

Tel: +86-577-57186815

Email: service@moesgo.com

AMZLAB GmbH

Address: Laubenhof 23, 45326 Essen, Made In China