MoesGo MS-104 Smart WiFi RF Switch Module

Instruction Manual

Smart WiFi Switch Module

An illustration shows the outline of the MoesGo smart switch module, a compact device designed for smart home integration.

Powered by

Global Operations

Control your devices globally via the all-in-one mobile application, anytime and anywhere.

• ⏱️ Schedule Timer
• ?️ Voice Control - Works with Google Home
• ?️ Voice Control - Works with Amazon Alexa
• ? Device Sharing

Diagram illustrating global and local control options: timer, voice commands (Google Home, Amazon Alexa), device sharing, app control, router connection, and manual switch operation.

Local Operations

Enjoy local control within your home network.

• ? App Control
• ? Router Connection
• ?️ Voice Control
• ? Toggle Switch
• ? Wall Switch (Reset Button)

Installation

⚠️ Warnings

1. Installation must be performed by a qualified electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water, humidity, and heat.
4. Install the device away from strong signal sources, such as microwave ovens, which can cause signal interruption and abnormal operation.
5. Obstruction by concrete walls or metal materials can reduce the effective range of the device and should be avoided.
6. DO NOT attempt to disassemble, repair, or modify the device.

Step 1: Power Off and Test

Turn off the circuit breaker and use an electrical tester to check the power supply. Ensure the circuit breaker is OFF before proceeding with wiring.

Diagram showing a circuit breaker in the 'OFF' (DESACTIVE) state with a warning symbol.

Step 2: Remove Old Switch

Carefully remove the existing wall switch.

Illustration of removing an old wall switch.

Step 3: Identify Wires and Verify Power Off

Remove the switch and pull it away from the wall. Identify the line/load wire (Note: wire color may differ from manual). Verify that the power is cut off.

We recommend removing the faceplate of the old switch and using an electrical tester to check all wires connected to the switch to ensure there is no voltage in the circuit. You may need to turn off multiple circuit breakers.

Diagrams show a wall switch being removed and wires being tested with a voltage tester.

Device Dimensions and Terminals

The module dimensions are approximately 47mm (height) x 52mm (width) x 18mm (depth).

Diagram illustrating the terminal block with labels: S1, LOUT, L1, L, N.

Technical Specifications

Wiring Diagrams

1. With a Single Switch

Diagram showing wiring for a single switch: Live (L), Neutral (N), Light fixture, Switch input (S1), and Live output (L1) terminals on the module.

2. Without Switch

Diagram showing wiring for a setup without a wall switch, connecting Live (L), Neutral (N), and Light.

3. With 2-Way Switches

Diagram illustrating wiring for a 2-way switch configuration, connecting Live (L), Neutral (N), Light, and two 2-way switches to the module.

4. With Wall Socket

Diagram showing wiring for connecting to a wall socket, including Live (L), Neutral (N), and the socket connection.

Wiring Instructions

1. Cut off the electrical power before performing any electrical installation work.
2. Connect the wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Connect the electrical power and follow the configuration instructions for the switch module.

Notes: Place your smartphone near the switch module during configuration, and ensure you have a Wi-Fi signal of at least 50%.

App Setup and Usage

Preparation

Download the MOES app from the App Store or Google Play by scanning the QR code or searching.

The MOES application is highly compatible and works well for scenes controlled by Siri, widgets, and personalized scene recommendations. (Note: Tuya Smart/Smart Life App also works, but MOES App is strongly recommended).

Diagrams show QR codes and icons for App Store (?) and Google Play (▶️).

Sign Up or Log In

• Download the "MOES" application.
• Navigate to the Registration/Login interface. Tap "Register" to create an account by entering your phone number to receive a verification code and set a password. Choose "Log In" if you already have a MOES account.

Diagrams show the reset button and adaptation for two switches.

Wi-Fi Linking Methods (Three Methods)

Complete the wiring of the switch module before proceeding to pairing.

3.1 First Method: Scan QR Code

Scan the QR code to configure the network guide.

Diagrams show app screenshots of scanning a QR code and adding a device.

3.2 Second Method: Pair via Bluetooth and Wi-Fi

Pair and clear the Wi-Fi code with devices connected via Bluetooth and Wi-Fi (New update).

1. Ensure your phone is connected to Wi-Fi and Bluetooth. Confirm the device is emitting continuous beeps.
2. Open the MOES app and tap "+". The home page will display automatically.

Diagrams show app screenshots of device search and pairing mode.

Adding the Device

Select the device you wish to add and tap "+".

Enter the Wi-Fi password and tap "Next", then wait for the connection to complete.

Device added successfully. You can edit the device name to access its page by tapping "Done".

Diagrams show app screenshots of the adding process, Wi-Fi password entry, and successful addition.

3.3 Third Method: Traditional Method

Once the switch module wiring is complete, press the traditional switch to enter pairing mode.

Open the app, select "+" in the upper right corner, and choose "Switch (Wi-Fi)" to add a device.

Diagrams show app screenshots related to the third pairing method.

Connection Process

Ensure your smartphone and the Wi-Fi+RF switch module are on the same 2.4 GHz Wi-Fi network. Confirm when the indicator light blinks rapidly (twice per second).

The connection will take approximately 10 to 120 seconds, depending on your network status.

Once pairing is complete, the switch will appear in the application.

Diagrams show app screenshots of connection progress and success.

Resetting Wi-Fi Code

a. For the switch module: Long press the module's reset button until you hear two beeps (Di-Di), then continue pressing until you hear continuous, rapid beeps (Di-Di-Di...).

b. For the toggle switch: Press the switch button 20 times (10 ON/OFF cycles) until you hear continuous, rapid beeps (Di-Di-Di...) for pairing and reset mode.

c. For the reset switch: Press the switch button 10 times until you hear continuous, rapid beeps (Di-Di-Di...) for pairing and reset mode.

Note: This Wi-Fi+RF switch module is compatible with toggle switches and reset switches.

Diagrams show the reset button and switch adaptation.

Pairing and Clearing RF Code

1. How to Pair RF Code

• 1.1 For the reset switch: Press the switch button 5 times until you hear Di-Di (2 times). Then press the RF transmitter switch for successful pairing.
• 1.2 For toggle switch: Press the switch button 10 times (cycle ON/OFF for 5 times) until you hear Di-Di (2 times), then press the RF transmitter switch for successful pairing.
• 1.3 For the reset button (module): Long press the switch module's reset button for 5 seconds until the signal beeps twice (Di-Di), then press the RF transmitter switch to complete pairing.

2. How to Clear RF Code

• 2.1 For the reset switch: Press the switch button 5 times until you hear Di-Di (2 times), wait 5 seconds, then press the switch button 5 times again until you hear Di-Di-Di-Di (4 times). The RF code is now cleared.
• 2.2 For toggle switch: Press the switch button 10 times (cycle ON/OFF for 5 times) until you hear Di-Di (2 times), wait 5 seconds, then press the switch button 10 times (cycle ON/OFF for 5 times) again until you hear Di-Di-Di-Di (4 times). The RF code is now cleared.
• 2.3 For the reset button (module): Long press the switch module's reset button and release your finger when you hear two beeps (Di-Di). Then press the button again after 5 seconds for 5 seconds until you hear four beeps (Di-Di-Di-Di).

3.3 How to Achieve Multi-Control Association

Note: Please confirm you have successfully completed the Wi-Fi linking method above to add this switch to your Smart Life App before association.

1. Add another smart switch via Wi-Fi to the same Smart Life/Tuya application. (If a smart switch has already been added to the app, proceed to the next step).

Note: The newly added switch does not require wiring to the light; only L and N are necessary for wiring.

You will see two devices in the application. Click on the main switch (e.g., a single-group switch) to proceed.

Click the edit icon ✏️ in the upper right corner and select "Multi-Control Association", then tap "+" in the right corner.

Select the switch you want to associate and then choose the switch button you want to use to control the same light.

Return to the previous page. You will see two items: your main switch and the one you just associated. Note: Please verify that the associated switch is enabled.

Do not associate another button in the same switch for multi-control.

Diagrams show app screenshots illustrating the multi-control association process.

Voice Control Integration (Alexa)

Integrate MOES APP Skill into Alexa APP

Complete the product networking setup within the application following the app's instructions.

Note: In the app, rename the device to something easily identifiable by Alexa, such as "bed light".

Configure Amazon Echo

(If you have already configured Amazon Echo, you can skip this step. The following instructions are based on the iOS client).

1. Ensure your Amazon Echo device is powered on and connected to a Wi-Fi network.
2. Open the Alexa app on your phone and log in.
3. Tap the menu in the upper-left corner of the home page, select "Settings", and tap "Set up a new device" to configure the Amazon Echo.
4. Choose your Amazon Echo device type and connection language.
5. Tap the device's small dot and hold it until the indicator light turns yellow.
6. Click "Continue" to connect to the hotspot, then connect to the Amazon Echo hotspot and return to the app page.
7. Click "Continue" to find your home Wi-Fi network and connect to it.
8. Amazon Echo will take a few minutes to try connecting to the network.
9. Once the network connection is successful, tap "Continue". An introductory video will appear. After the video finishes, tap "Continue" to go to the Alexa Home page.
10. You have now completed the Amazon Echo configuration process.

3. Key Step - Link Skill

1. Tap "Skills" in the Alexa app menu.
2. Search for the "App Name". Tap "Enable" to activate the skill.
3. Enter the App account and password, then tap "Link Now" to link your App account and activate the skill. You can now begin your smart home journey.

4. Common Commands

Control the device via voice command. You can now control your smart device with Echo. You can control your device (e.g., your bedroom light) using the following commands:

• "Alexa, turn on <device switch>"
• "Alexa, turn off <device switch>"

Frequently Asked Questions (FAQ)

Q1: What should I do if I cannot configure the switch module?

• a. Please check if the device is powered on.
• b. Ensure your mobile and the switch module are on the same 2.4 GHz Wi-Fi network.
• c. Ensure there are good internet conditions.
• d. Ensure the password entered in the application is correct.
• e. Ensure the wiring is correct.

Q2: What devices can be connected to this Wi-Fi switch module?

Most home appliances can be connected, such as lamps, washing machines, coffee makers, etc.

Q3: What happens if the Wi-Fi goes down?

You can still control the device connected to the switch module with your traditional switch. Once the Wi-Fi is back online, the device connected to the module will automatically reconnect to your Wi-Fi network.

Q4: What should I do if I change my Wi-Fi network or password?

You need to reconnect our Wi-Fi switch module to the new Wi-Fi network according to the application's user manual.

Service and Warranty

Thank you for your trust and support of our products. We provide a worry-free after-sales service for two years (shipping costs are not included). Please do not modify this warranty service card to safeguard your legitimate rights and interests. If you require after-sales service or have questions, please consult the distributor or contact us.

If product quality issues arise within 24 months of receipt, please prepare the product and packaging and submit a maintenance request online or at the store where you purchased the product. If the product is damaged due to personal reasons, a certain amount of maintenance fees will be charged for repair.

We reserve the right to refuse warranty service in the following cases:

1. Damaged products, missing LOGO, or exceeding the warranty period.
2. Products that have been disassembled, damaged, repaired by individuals, modified, or are missing parts.
3. The circuit is burnt, or the data cable or power interface is damaged.
4. Products damaged by foreign object intrusion (including, but not limited to, various forms of fluid, sand, dust, soot, etc.).

Recycling Information

All products marked with the selective collection symbol for waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated electrical and electronic equipment collection points set up by the government or local authorities.

Proper disposal and recycling help prevent potential negative consequences for the environment and human health. To find out where these collection points are located and how they operate, contact the installer or local authorities.

Diagram shows the WEEE symbol: a crossed-out wheeled bin.

Warranty Card

Product Information

• Product Name: _________________________
• Product Type: _________________________
• Date of Purchase: _________________________
• Warranty Period: _________________________
• Dealer Information: _________________________
• Customer Name: _________________________
• Customer Phone: _________________________
• Customer Address: _________________________

Maintenance Records

Follow Us

Thank you for your support and purchase from MoesGo. We are always here for your complete satisfaction. Please feel free to share your positive purchasing experience.

If you have further needs, please do not hesitate to contact us, and we will strive to meet your request.

• f @moessmart
• ? @moes_smart
• ? @moes_smart
• ▶️ MOES.Official
• ? @moes_smart
• ? www.moes.net

Regulatory Information

UK REP

EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatmaster.com

EC REP

AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China

Manufacturer:

YUEQING NOVA ELECTRONICS CO.,LTD
Address: 3th Floor, Building 2, Power Science and Technology Innovation Center, NO. 238, Wei 11 Road, Yueqing Economic Development Zone, Wenzhou, Zhejiang, China
Tel:+86-577-62625592
After-sale Service:service@moesgo.com

CB03