Neomounts WL40S-950BL18 Instruction Manual
Product: SELECT WL40S-950BL18
Product Overview
This document provides instructions for installing the Neomounts WL40S-950BL18 TV wall mount. It includes a parts list, step-by-step assembly instructions, and important safety information.
Model: WL40S-950BL18
Maximum Load Capacity: 0-125 kg (0-275.6 lbs)
VESA Compatibility: 300x200 - 800x600 mm
Dimensions: Max screen width 880mm, Max screen height 630mm.
Adjustments: Tilt: -5° to +15°, Swivel: ±45°, Rotation: ±3°.
Parts List
The following parts are included:
- A. M5x16 (x4)
- B. M5x25 (x4)
- C. M6x16 (x4)
- D. M6x25 (x4)
- E. M8x20 (x4)
- F. M8x35 (x4)
- G. M8x50 (x4)
- H. 5mm (x8)
- I. 14mm (x4)
- J. M6 (x4)
- K. M8 (x6)
- L. (x6) - Likely washers or spacers.
- M. M8x65 (x6)
- N. (x1) - Likely a tool or bracket.
- O. (x1) - Likely a tool or bracket.
- P. (x2) - Likely a bracket or adapter.
- Q. (x1) - Likely a tool or bracket.
- R. (x1) - Likely a tool or bracket.
Diagrams show various screws, washers, and mounting hardware labeled A through R.
Installation Instructions
Step 1: Prepare the Mount
Remove the VESA plate from the mount.
Diagram shows a hand detaching a VESA plate from the main mount arm, with a callout indicating the connection point.
Step 2: Install the Wall Plate
Step 2A: Wooden Stud Installation
Install the wall plate on a wooden stud. Ensure the mounting location is secure.
Diagram shows the wall plate being attached to a wall stud. It indicates using screws (K) and a template for positioning. Dimensions shown: 75mm stud depth, 5.5mm plate thickness.
Step 2B: Brick or Concrete Wall Installation
Install the wall plate on a solid brick or concrete wall. Ensure the mounting location is secure.
Diagram shows the wall plate being attached to a brick/concrete wall. It indicates using screws (K) and a template for positioning. Dimensions shown: 75mm wall depth, 10mm plate thickness.
Step 3: Attach Adapter Brackets
Install the adapter brackets and use spacers if necessary, depending on the screen's shape.
Diagram shows adapter brackets (likely G, H, I) being attached to the back of a TV screen, with screws (A-G) and spacers (H/I) being used. A note indicates this is applicable when using M5/M6 screws.
Step 4: Attach Screen to Bracket
Attach the screen onto the bracket and secure it.
Diagram shows the TV with adapter brackets being hung onto the main wall mount bracket. Screws (J) are used to secure the connection.
Step 5: Hang TV onto Wall Plate
Attach the TV onto the wall plate.
Diagram shows the TV, now attached to the bracket, being hung onto the wall plate. A 5mm gap is indicated.
Step 6: Align and Secure
Ensure alignment using a bubble level and secure it.
Diagram shows the TV mounted on the wall plate. It indicates using a bubble level for alignment and then tightening screws (likely on the mount arms) to secure the TV in place. Numbers 1, 2, 3, 4 indicate adjustment points.
Step 7: Adjust Torque
Adjust the torque settings for the screen's movement.
Diagram shows a close-up of the adjustment mechanism, indicating screws (N) and a rotational adjustment with a tool (R). A circular arrow indicates the direction of adjustment.
Step 8: Run Cables
Run the cable(s) through the cable cover.
Diagram shows cables being routed through a cable management channel on the mount. It indicates using clips or ties (labeled 1, 2, 3, 4) to secure the cables.
Safety Precautions
CAUTION:
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earthquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
