Product Overview
This document provides instructions for installing the Neomounts WL35-550BL12 TV wall mount by Newstar. It includes safety precautions, parts list, and step-by-step installation procedures.
Brand: Neomounts by Newstar
Model: WL35-550BL12
Product Type: TV Wall Mount
Supported VESA Patterns: 75x75 mm to 200x200 mm
Weight Capacity: 0-45 kg (0-99.2 lbs)
Depth: 3.3 cm
Dimensions Diagram Description: The diagram illustrates key dimensions of the mount: 320mm height, 315mm width, with adjustable mounting hole patterns from 75mm to 200mm horizontally and vertically. It also shows a depth of 130mm for the main bracket, 33mm for a connection point, and 194mm for the overall height. Tilt angles of +12° and 0° are indicated.
Parts Included
| Part | Description |
|---|---|
| A | M4x16 screws (x4) |
| B | M4x25 screws (x4) |
| C | M5x16 screws (x4) |
| D | M5x25 screws (x4) |
| E | M6x16 screws (x4) |
| F | M6x25 screws (x4) |
| G | M8x20 screws (x4) |
| H | M8x35 screws (x4) |
| I | M8x50 screws (x4) |
| J | 5mm spacers (x4) |
| K | 14mm spacers (x8) |
| L | M6 bolts (x4) |
| M | M8 bolts (x4) |
| N | Washers (x4) |
| O | M8x50 screws (x4) |
| P | Safety straps (x2) |
| Q | Wall plate (x1) |
| R | Adapter brackets (x2) |
Installation Steps
Step 1: Mount the Wall Plate
Step 1 A: Wooden Stud Installation
Install the wall plate onto a wooden stud. Ensure the wall structure is sound.
Diagram Description: Shows the wall plate (Q) being secured to a wooden stud using screws. Key dimensions indicated are 65mm and 5.5mm, likely referring to screw placement or plate dimensions.
Step 1 B: Brick or Concrete Wall Installation
Install the wall plate onto a solid brick or concrete wall. Use appropriate anchors (not explicitly listed but implied by diagrams for brick/concrete). Ensure the wall is strong enough.
Diagram Description: Shows the wall plate (Q) being secured to a brick or concrete wall using screws and possibly anchors. Key dimensions indicated are 60mm and 10mm, likely referring to anchor or screw placement.
Step 2: Attach Adapter Brackets to TV
Attach the adapter brackets (R) to the back of your TV using the provided screws (e.g., G, O) and spacers (J, K) if necessary, depending on the TV's back panel design. Ensure compatibility with M4, M5, or M6 screw sizes.
Diagram Description: Illustrates attaching the adapter brackets (R) to the TV using screws (G, O) and spacers (J, K). The note indicates this step is applicable when using M4, M5, or M6 screws.
Step 3: Mount TV onto Wall Plate
Hang the TV with the attached adapter brackets onto the wall plate. Secure the TV using the safety straps (P).
Diagram Description: Shows the TV, with adapter brackets attached, being hung onto the wall plate. The process involves hooking the brackets onto the plate and then securing them with safety straps (P).
Step 4: Release the Screen
To detach the TV from the wall mount, pull the safety straps.
Diagram Description: Depicts pulling the safety straps (P) to release the TV from the wall mount.
Safety Precautions and Warnings
General Safety:
- Read this manual carefully before installation and follow all instructions. Store the manual for future reference.
- The manufacturer is not liable for damage or injury due to incorrect installation or operation not covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer is not liable for damage or injury caused by human factors or natural disasters (e.g., earthquakes, typhoons).
- Installation should be performed by qualified personnel only.
- At least two people are required for installation or removal to prevent falling objects.
Installation Area Inspection:
- Avoid areas with high temperatures, humidity, or water contact.
- Do not install near air conditioning vents or areas with excessive dust and fumes.
- Install only on vertical walls; avoid slanted surfaces.
- Do not install in locations subject to shock or vibration.
- Avoid direct exposure to bright light, which can cause eye fatigue.
Structural Integrity:
- Ensure adequate ventilation space around the display.
- Verify the wall, ceiling, or floor structure is strong enough to support at least four times the combined weight of the display and mount.
- The mounting location must withstand earthquakes or strong shocks.
General Guidelines:
- Do not modify accessories or use broken parts. Contact your dealer for assistance.
- Tighten all screws securely but avoid excessive force to prevent damage.
- Holes and bolts may remain in the wall after removal. Stains may appear after prolonged use.
- The product warranty covers the mount itself and is valid for 5 years. The manufacturer cannot control wall/ceiling/floor types or installation quality.
- Consult the English manual for any disputes regarding terms and conditions.
