System Firmware Update Instructions for SPH-EVO64DAB

REMARKS

• If you have any difficulty carrying out these instructions, please contact Pioneer Customer Support.
• Once upgraded to this version, it is not possible to downgrade to a lower version.
• ✔️ Please download and print these instructions before downloading and installing the firmware update; it is important that you complete all steps correctly and in the order described below.
• Never turn your unit off or disconnect the USB storage device while the firmware is being updated.
• You can only update the firmware when the vehicle is stopped and the parking brake is engaged.

A. Displaying the firmware version

Check whether the firmware of your unit needs to be updated by checking the version number of the firmware.

1. Touch the following key:

   [Screenshot: Touch screen interface showing "OFF" and "Wed 12:00" in the status bar. The main display shows a menu with options like "System Language", "Restore Settings", "Clock Settings", "Dimmer Settings", "Picture Adjustment", "System Information", and "Terms of Use / Privacy".]

2. The “System" screen appears, scroll down the list.
3. Touch [System Information], next touch [Firmware Information].

   [Screenshot: Two views of the system menu. The left shows "System Information" highlighted. The right shows "Firmware Information" highlighted within the system menu.]

4. After the “Firmware Information” screen appears, check the firmware version; when the Version is lower than 3.05, it is necessary to update the firmware.

   [Screenshot: The "Firmware Information" screen displays "Firmware", "Model Name" (SPH-EVO93DAB), and a version number "1.00".]

B. Downloading the Firmware Update Files

1. Download the correct firmware file to a folder on your computer. The file is named SPH-EVO64DAB_FW_Ver305.ZIP.
2. Double click the ZIP file to open it.
3. Extract and save the file "SPH-EVO64DAB.avh" to a folder on your computer.

C. Updating the firmware on your Unit

IMPORTANT

• Please DO NOT perform this firmware update if the model number of your Pioneer unit is anything other than SPH-EVO64DAB.
• Ensure that the correct update file is located within the root (top) folder of your USB storage device. There should be no other files on the USB storage device.
• While your unit is being updated, DO NOT turn off the system's power and DO NOT touch the unit's touch panel screen, as this may result in severe damage to your unit.
• DO NOT remove the USB storage device during the firmware update.
• Performing the firmware update will restore all settings to their default values.
• Before you start the update procedure, make sure to disconnect any mobile devices that are currently connected to your unit.

PROCEDURE:

1. Connect a blank (FAT32 formatted) USB storage device with a minimum capacity of 2GB to your computer, then locate the correct update file and copy it onto the root (top) folder of the USB storage device.
2. Connect the USB storage device to the USB port.
3. On your unit, set the audio source to OFF.
4. Touch the following keys in the following order.

   [Screenshot: Touch screen interface showing "OFF" and "Wed 12:00" in the status bar. The main display shows a menu with options like "System Language", "Restore Settings", "Clock Settings", "Dimmer Settings", "Picture Adjustment", "System Information", and "Terms of Use / Privacy".]

5. The “System" screen appears, scroll down the list.
6. Touch [System Information], next touch [Firmware Update].

   [Screenshot: Two views of the system menu. The left shows "System Information" highlighted. The right shows "Firmware Update" highlighted within the system menu.]

7. The “Firmware Update” screen appears. Touch [USB], next touch [Continue] to display the data transfer mode.

   [Screenshot: Three screens related to firmware update. The first shows "Firmware Update" with options "USB" and "CarAVAssist". The second shows a "Reading..." status. The third shows a "Please wait for a while." message.]

8. Read the “WARNING,” then touch the [Start] button to start the update process. If it shows “ERROR” on the display, try another USB device.

   [Screenshot: The "Firmware Update" screen displays a prominent "WARNING!" message detailing precautions like "DO NOT DISCONNECT USB DURING UPDATE", "DO NOT DRIVE THE CAR DURING UPDATE", "DO NOT TURN OFF THE ENGINE DURING UPDATE", and "DO NOT RESET THE PRODUCT DURING UPDATE". A "Start" button is visible.]

9. The progress is displayed during the update.

   [Screenshot: The "Software updating" screen shows "Updating..." with a progress bar indicating 50% completion and file version information (1.00 -> 1.13). It also reiterates warnings: "DO NOT DISCONNECT USB DURING UPDATE", "DO NOT DRIVE CAR DURING UPDATE", "DO NOT TURN OFF POWER DURING UPDATE", "DO NOT RESET THE PRODUCT DURING UPDATE".]

   DO NOT turn your unit off or eject the USB storage device while the firmware is being updated.

10. Display will show “It succeeded...” when the update is complete. Please disconnect the USB storage device.

    [Screenshot: The "Update succeeded" screen displays the message "It succeeded." and instructs "OK to disconnect USB memory." It also includes a warning: "DO NOT DRIVE CAR WHILE THIS MESSAGE IS DISPLAYED". An "OK" button is present.]

11. The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen.

    [Screenshot: A "WARNING!" screen related to safe driving, stating "Read all safety instructions in the product documentation. Driving without due care and attention can lead to serious injury or death. Only use a function when it is safe and legal to do so. Watch the road and your surroundings, and comply with all traffic regulations." An "OK" button is present.]

12. The firmware update is now complete. Your Pioneer AV Receiver is now ready for use.

    [Screenshot: The main menu screen is displayed, showing "Update Succeed!" and the current time "Wed 12:15".]

Firmware Update FAQ

Q: What if my set does not switch on automatically after updating the software or starts up more than once?

A: Turn off the ignition key and turn on again – the set should start up now.

Q: What if I cannot upgrade my set / the set does not show the start up screen after more than 1 attempt?

A: Please contact your local Pioneer service organisation for a product check-up.

Contact Information

Pioneer Customer Support Center

http://www.pioneer.eu

Copyright(c) 2024 Pioneer Corporation