This document provides essential instructions for updating the system firmware on your Pioneer SPH-EVO950DAB car AV receiver. Following these steps ensures a smooth and successful update process.
Important Remarks
- Contact Pioneer Customer Support for any difficulties.
- Firmware updates are non-reversible to lower versions.
- Download and print these instructions before proceeding.
- Never turn off the unit or disconnect the USB device during the update.
- Ensure the vehicle is stopped with the parking brake engaged for the update.
Firmware Update Procedure
1. Checking Current Firmware Version
Verify your unit's current firmware version via the 'System Information' menu to determine if an update is needed. An update is recommended if the version is lower than 1.56.
2. Downloading Firmware Files
Download the correct firmware file (e.g., SPH-EVO950DAB_FW_Ver156.ZIP) to your computer and extract the .avh file to a folder.
3. Preparing the USB Device
Format a USB storage device (FAT32 or NTFS) with a minimum capacity of 512MB. Copy the extracted firmware file (SPH-EVO950DAB.avh) to the root folder of the USB device. Ensure no other files are present.
4. Performing the Firmware Update
Connect the USB device to your unit, set the audio source to OFF, navigate to 'Settings' > 'System Information' > 'Firmware Update', select 'USB', and touch 'Continue'. Read the warning and touch 'Start' to begin the update. Monitor the progress screen and do not interrupt the process.
5. Completing the Update
Once the update is successful ("It succeeded..."), disconnect the USB device. The product will reboot. After rebooting, check the firmware version again to confirm the update.
6. Restoring Settings
It is recommended to restore the unit's settings after the firmware update for changes to take effect. Navigate to 'Settings' > 'Restore Settings' and touch 'Restore'. The unit will reboot automatically.
Frequently Asked Questions (FAQ)
For common issues like the unit not switching on automatically after an update, refer to the FAQ section in the original document for troubleshooting steps.
Contact Information
For further assistance or product check-ups, please contact the Pioneer Customer Support Center.
Website: https://www.pioneer.eu