Toyota Vehicle Electrical Diagrams and Component Locations
Body Component Locations
This section details the location of specific ECUs within the vehicle body for different cab configurations.
Single Cab
Components shown:
- Tire Pressure Warning ECU and Receiver (Tire Pressure Monitor Receiver Assembly)
- Urea Pump Control ECU
Extra Cab
Components shown:
- Urea Pump Control ECU
Double Cab
Components shown:
- Tire Pressure Warning ECU and Receiver (Tire Pressure Monitor Receiver Assembly)
- Urea Pump Control ECU
Engine Compartment Component Locations
This section illustrates the location of various electronic control units (ECUs) and related components within the engine compartment for Left-Hand Drive (LHD) and Right-Hand Drive (RHD) vehicles.
LHD Configuration
Components shown:
- Injector Driver
- Brake Actuator Assembly (with VSC)
- Brake Actuator Assembly (without VSC)
- Air Injection Control Driver
- Glow Plug Controller
- Engine Room R/B (Relay Box)
- Engine Room J/B (Junction Block)
- Headlight Cleaner Control Relay
RHD Configuration
Components shown:
- Glow Plug Controller
- Injector Driver
- Air Injection Control Driver
- Engine Room R/B (Relay Box)
- Engine Room J/B (Junction Block)
- Brake Actuator Assembly (without VSC)
- Brake Actuator Assembly (with VSC)
Front Fender Apron LH - Fuse and Relay Boxes
Diagrams showing the layout of fuse and relay units located in the Front Fender Apron LH.
Unit A
Contains the following relays:
- DIMMER Relay
- H-LP Relay
- ST NO.1 Relay (*2)
Unit B
Contains the following relays:
- ST NO.1 Relay (*1)
- ST NO.2 Relay (*3)
- INJ Relay (*1)
- EDU Relay (*2)
Unit C
Indicated as part of the fuse/relay box system.
Key: 1: Engine Room R/B, 2: Engine Room J/B
Notes: *1, *2, *3 refer to specific engine types or systems (e.g., 1GR-FE, 1GD-FTV, 2GD-FTV w/ Stop & Start System).
Unit A - Top View and Fuse Details
The top view of Unit A shows the arrangement of fuses and relays. The following fuses are detailed with their ratings and functions:
Fuse No. | Rating | Function |
---|---|---|
1 | 50A | ABS NO.1 |
2 | 30A | ABS NO.2 |
3 | 30A | R/B I/P-ALT |
4 | 50A | R/B FLOOR-ALT |
5 | 30A | P/SEAT (*26) |
30A | P/SEAT(D) (*27) | |
6 | 30A | PTC HTR NO.2 |
9 | 50A | PTC HTR NO.1 |
10 | 30A | H-LP CLN |
11 | 30A | CDS FAN/PTC HTR NO.3 |
12 | 140A | ALT |
13 | 80A | GLOW |
14 | 60A | J/B-B |
15 | 40A | BBC NO.3 |
16 | 40A | BBC NO.1 |
17 | 30A | ST NO.1 (1GR-FE, 1TR-FE, 2TR-FE) |
50A | ST NO.1 (1GD-FTV, 2GD-FTV, 1KD-FTV, 2KD-FTV, 5L-E) | |
19 | 50A | AIR PMP (w/ Air Injection Control Driver) |
50A | DCU-MAIN (w/ Urea Pump Control ECU) | |
20 | 40A | H-LP MAIN |
21 | 20A | A/F HTR (1GR-FE, 1TR-FE, 2TR-FE) |
25A | EDU (1GD-FTV, 2GD-FTV, 1KD-FTV, 2KD-FTV, 5L-E) | |
22 | 10A | STRG LOCK/AM2 NO.1 |
25 | 15A | INJ (1GR-FE, 1TR-FE, 2TR-FE) |
30A | ST NO.2 (2GD-FTV w/ Stop & Start System) | |
26 | Before Aug. 2017 Production | |
27 | From Aug. 2017 Production | |
28 | 10A | STOP (*26) |
10A | STRG HTR (*27) |
Additionally, Unit A contains circuits for:
- H-LP RH-LO, H-LP LH-LO, H-LP RH-HI, H-LP LH-HI
- S-HORN, MAYDAY, HORN
- EFI-B, ALT-S/ICS, SMART
- ECU-B NO.3, ECU-B NO.2, ECU-B NO.4
- D/C CUT, ODS
- ECU-B NO.1
- RADIO, DOME
Unit A - Connector Views
Shows back views of Unit A with connectors labeled 1A and 1B, originating from the Engine Room Main Wire.
Unit B - Fuse and Relay Layout
Details the fuse and relay configurations for Unit B, varying by engine type.
For 1GR-FE, 1TR-FE, 2TR-FE Engines:
- FUEL PMP/AIR PMP HTR Relay
- A/F HTR Relay
For 1GD-FTV, 2GD-FTV, 1KD-FTV, 2KD-FTV, 5L-E Engines:
- GLOW Relay
Engine Room R/B and Engine Room J/B Inner Circuit Diagrams
Detailed wiring diagrams illustrating the internal circuits of the Engine Room Relay Boxes (R/B) and Junction Blocks (J/B).
Notes:
- *1: 1GR-FE, 1TR-FE, 2TR-FE
- *2: 1GD-FTV, 2GD-FTV, 1KD-FTV, 2KD-FTV, 5L-E
- *6: With Air Injection Control Driver
- *7: With Urea Pump Control ECU
- *8: Before Aug. 2017 Production
- *9: From Aug. 2017 Production
Unit A Circuit Details
Illustrates connections for various fuses and relays within Unit A, including:
- ABS NO.1, ABS NO.2, R/B I/P-ALT, R/B FLOOR-ALT, P/SEAT, PTC HTR NO.2, PTC HTR NO.1, H-LP CLN, CDS FAN/PTC HTR NO.3, ALT, GLOW, J/B-B, BBC NO.3, BBC NO.1, ST NO.1, ST NO.1 (different engines), AIR PMP, DCU-MAIN, H-LP MAIN, A/F HTR, EDU, STRG LOCK/AM2 NO.1, INJ, ST NO.2, STOP, STRG HTR.
- Connections also shown for H-LP (High/Low, Left/Right), S-HORN, MAYDAY, HORN, EFI-B, ALT-S/ICS, SMART, ECU-B series, D/C CUT, ODS, RADIO, DOME.
Unit C Circuit Details
Illustrates connections for:
- DIMMER Relay
- H-LP Relay
- ST NO.1 Relay
- STOP/CDS FAN Relay
- ST NO.1 Relay (*1)
- ST NO.2 Relay (*5)
- HORN Relay
- INJ Relay (*1)
- EDU Relay (*2)
Unit B Circuit Details
Illustrates connections for:
- FUEL PMP/ AIR PMP HTR Relay (*1)
- A/F HTR Relay (*1)
- GLOW Relay (*2)
Instrument Panel J/B Assembly - Cowl Side Panel LH
Diagrams showing the Instrument Panel Junction Block (J/B) Assembly located on the Cowl Side Panel LH.
Views A, B, and C
These views illustrate the physical arrangement of the assembly and highlight the Body ECU.
View A - Connector Details
Shows connectors and their wiring originating from the Engine Room Main Wire (e.g., 2R for RHD, 2A for LHD) and Floor Wire (e.g., 2L, 2M, 2D). Also shows other connectors like 2K, 2C, 2B.
View B - Connector Details
Shows connectors and their wiring originating from the Instrument Panel Wire (e.g., 2F, 2Q, 2J, 2P, 2N, 2G, 2E, 2H).
View C - Fuse Layout
Details the fuses located in View C of the assembly, including:
- 40A HTR, 30A DOOR NO.1, 30A AM2 NO.2
- 25A METER, 25A A/BAG, 25A IG2 NO.3
- 10A SFT LOCK-ACC, 15A P/OUTLET NO.1, 15A IG2 NO.2
- 10A WIPER, 10A IG1 NO.1, 10A IG1 NO.3, 10A IG1 NO.4, 15A WASHER
- 25A DOOR NO.2, 25A DOOR R/L, 25A DOOR R/R
- 10A OBD, 10A EFI NO.1, 10A TURN&HAZ, FOG FR/DRL
Notes: Includes references to engine types (1GR-FE, 1GD-FTV, etc.) and system variations (e.g., *1, *2, *3, *4).
Instrument Panel J/B Assembly - Inner Circuit Diagrams
Detailed wiring diagrams for the Instrument Panel J/B Assembly.
Key Relays and Circuits
Illustrates connections for EFI-MAIN NO.1 Relay, EFI-MAIN NO.2 Relay, C/OPN NO.1 Relay, and various fuses.
Fuses include: 25A EFI-MAIN NO.1, 25A EFI-MAIN NO.2, 10A EFI NO.1, 10A TURN&HAZ, 10A ETCS, 30A AM2 NO.2, 25A DOOR NO.2, 25A DOOR R/L, 25A DOOR R/R, 30A DOOR NO.1.
Power Window Circuits: Includes circuits related to power windows, with notes on jam protection (Driver's Door Only, All Door Jam Protection, w/o Jam Protection).
Additional Circuits
Covers fuses such as 10A TAIL, 10A FOG FR/DRL, 10A OBD, 10A ECU-ALT NO.2, 40A AM1, 40A HTR, 25A WIPER, 15A WASHER, 10A IG1 NO.4, 10A IG1 NO.1, 10A IG1 NO.2, 15A P/OUTLET NO.1, 10A SFT LOCK-ACC, and ACC Relay.
Body ECU Connections
Detailed pinout diagrams for the Body ECU, showing connections to various signals and components:
- ECU Pins: BECU, GND, DIM, IG, SH, HORN, ACT+, HCTY, ACT-, ACTY, ACTD, DBKL, DOMR, FFGO, RFGO, HRLY, GSW, ACAN.
- Connector Assignments: Signals are routed through connectors like 2G, 2L, 2C, 2H, 2Q, 2D, 2M, 2N, 2P, 2K, 2J, 2F, 2E, 2B, 2A, 2R.
- Vehicle Feature Notes: Includes references to features like Outer Rear View Mirror Side Turn Signal Light, Speed Sensitive Automatic Door Lock, and Collision Door Lock Release Function.
Instrument Panel Component Locations
Illustrations showing the placement of various electronic components within the instrument panel area.
LHD Configuration
Components shown include:
- Telephone Transceiver Assembly
- 4WD Control ECU
- ECM
- Engine Stop and Start ECU
- Smart Door Control Receiver Assembly (*2)
- Door Control Receiver (*3)
- Body ECU
- Instrument Panel J/B Assembly
- Network Gateway ECU
- Headlight Leveling ECU Assembly
- R/B Assembly No. 6
- Transponder Key ECU Assembly (*3)
- ID Code Box (*2)
- Certification ECU
- No. 4 CAN Junction Connector
- Steering Lock Actuator or Upper Bracket Assembly
- Transmission Control ECU Assembly
- R/B Assembly No. 4
- Turbo Motor Driver
- R/B Assembly No. 5
- Navigation ECU
- R/B Assembly No. 3
- Shift Lock Control ECU (Transmission Floor Shift Assembly)
- A/C Amplifier Assembly
- Airbag Sensor Assembly
Notes: *1: Refer to Service Bulletin for installation position; *2: With Entry & Start System; *3: Without Entry & Start System.
RHD Configuration
Similar components are shown for the RHD configuration, including:
- Transmission Control ECU Assembly
- Smart Door Control Receiver Assembly (*2)
- Door Control Receiver (*3)
- Body ECU
- Instrument Panel J/B Assembly
- Double Lock Door Control Relay Assembly
- R/B Assembly No. 4, R/B Assembly No. 6, R/B Assembly No. 5, R/B Assembly No. 3
- ECM, 4WD Control ECU, Engine Stop and Start ECU
- ID Code Box (*2), Transponder Key ECU Assembly (*3)
- Certification ECU
- Headlight Leveling ECU Assembly
- Network Gateway ECU
- No. 4 CAN Junction Connector
- Steering Lock Actuator or Upper Bracket Assembly
- Turbo Motor Driver
- Shift Lock Control ECU (Transmission Floor Shift Assembly)
- Airbag Sensor Assembly
Notes: *1: Refer to Service Bulletin for installation position; *2: With Entry & Start System; *3: Without Entry & Start System.
No. 4 CAN Junction Connector
Details regarding the No. 4 CAN Junction Connector, including its location and interchangeability.
Connector Views
Shows connector types G135, G132, and G133, all labeled 'White'.
Note: G132, G133, and G135 are interchangeable.
Inner Circuit Diagram
Illustrates the internal wiring for G132(A), G133(B), and G135(D) as the No. 4 CAN Junction Connector.
R/B Assembly No. 3 - Component Locations and Inner Circuit
Details the relays and their internal circuits for R/B Assembly No. 3.
Component Locations (LHD/RHD)
Shows the arrangement of the following relays:
- DRL Relay
- S-HORN Relay
- FOG FR Relay
- TAIL Relay
- DOME CUT Relay
- IG1 NO.1 Relay
Inner Circuit Diagram
Illustrates the internal wiring connections for each of the relays listed above.
R/B Assembly No. 4 - Component Locations and Inner Circuit
Details the relays and their internal circuits for R/B Assembly No. 4.
Component Locations (LHD/RHD)
Shows the arrangement of the following relays:
- HTR Relay
- IG1 NO.2 Relay
- IG2 Relay
- STRG HTR Relay
- A/C COMP Relay
Notes: Includes references to ECU-IG2/C/OPN NO.2, production dates (Before Aug. 2017, From Aug. 2017), and S/HTR variations.
Inner Circuit Diagram
Illustrates the internal wiring connections for each of the relays listed above.
R/B Assembly No. 5 - Component Locations and Inner Circuit
Details the relays and their internal circuits for R/B Assembly No. 5.
Component Locations (LHD/RHD)
Shows the arrangement of the following relays:
- PTC HTR NO.1 Relay
- PTC HTR NO.3 Relay
- PTC HTR NO.2 Relay
- VISCOUS Relay
- D/L NO.1 Relay
- D/L NO.2 Relay
- D/L NO.3 Relay (RHD only)
Inner Circuit Diagram
Illustrates the internal wiring connections for each of the relays listed above.
R/B Assembly No. 6 - Component Locations and Inner Circuit
Details the relays and their internal circuits for R/B Assembly No. 6.
Component Locations (LHD)
Shows the arrangement of the following relays:
- DCU-MAIN Relay
- NOX PM Relay
- DEICER Relay
- FOG RR Relay
- INV Relay
- DEF Relay
Also lists associated fuses: 25A DCU NO.1, 20A DCU NO.2, 20A NOX PM, 7.5A DCU-B, 10A DEF-S, 10A FOG RR, 15A DEICER, 25A DEF.
Inner Circuit Diagram
Illustrates the internal wiring connections for each of the relays listed above.
Seat Component Location
Diagram showing the location of occupant detection sensors.
- Occupant Detection ECU (*1 RHD)
- Occupant Detection ECU (*2 LHD)