Toyota Front Fender Apron LH Fuse and Relay Diagram
Engine Room R/B and Engine Room J/B Identification
The diagram illustrates components within the Engine Room R/B (Engine Room Relay Block) and Engine Room J/B (Engine Room Junction Block).
Unit A - Front Fender Apron LH
This section details the fuse and relay configurations for Unit A, located in the Front Fender Apron LH.
Top View of Unit A
The top view shows the layout of various relays and fuses. Specific relays identified include:
- DIMMER Relay
- H-LP Relay
- ST NO.1 Relay (*2)
- Unit B
- ST NO.1 Relay (*1)
- ST NO.2 Relay (*3)
- STOP/CDS FAN Relay
- HORN Relay
- INJ Relay (*1)
- EDU Relay (*2)
The diagram also lists numerous fuses with their amperage ratings and associated functions, such as:
- ECU-ALT NO.1 (20A)
- STOP (10A)
- 4WD-ALT (10A)
- H-LP RH-LO (10A)
- H-LP LH-LO (10A)
- H-LP RH-HI (10A)
- H-LP LH-HI (10A)
- S-HORN (7.5A)
- MAYDAY (7.5A)
- HORN (10A)
- EFI-B (7.5A)
- ALT-S/ICS (7.5A)
- SMART (10A)
- ECU-B NO.3 (10A)
- ECU-B NO.2 (25A)
- ECU-B NO.4 (30A)
- D/C CUT (10A)
- ODS (7.5A)
Additionally, a list of fuses with higher amperage ratings and their applications is provided:
- ABS NO.1 (50A)
- ABS NO.2 (30A)
- R/B I/P-ALT (30A)
- R/B FLOOR-ALT (50A)
- P/SEAT (30A)
- PTC HTR NO.2 (30A)
- PTC HTR NO.1 (50A)
- H-LP CLN (30A)
- CDS FAN/PTC HTR NO.3 (30A)
- ALT (140A)
- GLOW (80A)
- J/B-B (60A)
- BBC NO.3 (40A)
- BBC NO.1 (40A)
- ST NO.1 (30A for 1GR-FE, 1TR-FE, 2TR-FE; 50A for 1GD-FTV, 2GD-FTV, 1KD-FTV, 2KD-FTV, 5L-E)
- AIR PMP (50A for w/ Air Injection Control Driver)
- DCU-MAIN (50A for w/ Urea Pump Control ECU)
- H-LP MAIN (40A)
- A/F HTR (20A for 1GR-FE, 1TR-FE, 2TR-FE)
- STRG LOCK/AM2 NO.1 (10A)
- INJ (15A for 1GR-FE, 1TR-FE, 2TR-FE)
- ST NO.2 (30A for 2GD-FTV w/ Stop & Start System)
The diagram also shows connections from the Engine Room Main Wire to specific points (1A and 1B) within Unit A, with a 'Back View' illustration of one of the connectors.
Unit B - Relay Configurations
This section details the internal configurations of specific relays used in Unit B.
For 1GR-FE, 1TR-FE, 2TR-FE Engines:
- FUEL PMP/ AIR PMP HTR Relay: Shows a 5-pin configuration with terminals labeled 1, 2, 3, 4, 5.
- A/F HTR Relay: Shows a 5-pin configuration with terminals labeled 1, 2, 3, 5.
For 1GD-FTV, 2GD-FTV, 1KD-FTV, 2KD-FTV, 5L-E Engines:
- GLOW Relay: Shows a 5-pin configuration with terminals labeled 1, 2, 3, 5.