Genie UKEP Universal Keypad Transmitter
This document provides an overview of the Genie UKEP Universal Keypad Transmitter, a wireless entry system for garage doors manufactured by The Genie Company, a division of Overhead Door Corporation.
Model Compatibility
- Genie Pro
- GUK-BX
- Genie Retail
- GUK-R
- OHD Pro
- OUK-BX
Identification
FCC ID: B8Q UKEP
IC ID: 2133A-UKEP
Product Views
UKEP Front View
The front view displays a white, flip-up keypad transmitter. The flip-up cover reveals instructions for setup, PIN management, and battery replacement. The keypad features numeric buttons (0-9), a 'P' (Program) button, and directional arrow buttons. The Genie logo is visible at the bottom of the unit.
UKEP Bottom View
The bottom view shows the rear of the transmitter, designed for wall mounting. It includes mounting slots and various regulatory labels, including FCC and IC identification information.
Basic Operation Guidance
Setting up a PIN
To set up a Personal Identification Number (PIN), press the 'P' button. The device will indicate when the keyring is programmed.
Programming the Opener
To program the garage door opener:
- Press the 'P' button.
- Wait for the opener's [LED Indicator] to reach a specific state.
- Press the 'A' button.
- Press the 'TA' button.
- Press the 'YA' button.
- The opener's [LED Indicator] will turn ON, indicating successful programming.
Using the Keypad
After programming, the door opener will respond to keypad input. The opener's [LED Indicator] will turn OFF after operation.
PIN Management
The keypad supports features for forgotten PINs and changing existing PINs.
Battery Replacement
When the battery needs replacement, use standard AAA batteries.
Support
For assistance, contact Genie at 1-800-354-3643.
