Grundfos Hot Water Recirculation
Hot water without the wait
Before Grundfos, hot water recirculation solutions were difficult, if not impossible. Now, installations in both new construction and existing homes are quick, easy and profitable.
Features & Benefits:
- Installations take an hour or less
- In retrofits, the Comfort System bypass valve makes it all possible with no return line and no need for electricity under the sink
- Uses less energy than a 25-watt light bulb (Comfort System Only)
- Can save up to 16,000 gallons of water per year
- Backed by a 30-month warranty
- All products certified to NSF-61 and NSF-372 standards
For more information, go to: grundfos.us
Comfort System
UP 15-10 SU7P TLC
Pump, valve, line-cord, and (2) S.S. flex hoses.
Certifications: Certified by UL for Water Quality (ANSI/NSF61/372) and IAPMO listed.
COMFORT PM AUTO
UP 10-16 A PM BN5/LC
AUTOADAPT™ and line cord.
Certifications: Certified by UL for Water Quality (ANSI/NSF61/372) and IAPMO listed.
Comfort System UP 15-10 SU7P TLC (Part# 595916)
Pump Technical Data:
- Flow, Qmax: 6.3 GPM (1.4 m³/h)
- Head, Hmax: 5.1 ft (1.6 m)
- Motor: Single Phase, 115V
- Min. Fluid Temperature: 36°F (2°C)
- Max. Fluid Temperature: 150°F (66°C)
- Max. Working Pressure: 145 PSI
Electrical Connection:
The pump is fitted with a 10ft. line-cord w/plug.
Timer:
3 control options available:
- Continuous
- 15-minute intervals
- OFF
Electrical Data:
- Volts: 1X115V
- Watts: 25W
- Amps: 0.23A
Performance Curve:
The performance curve for the UP15-10SU7P/TLC shows head (H) in feet and meters on the vertical axis, and flow rate (Q) in US Gallons Per Minute (GPM) and cubic meters per hour (m³/h) on the horizontal axis. The curve illustrates that at a flow rate of 0 GPM, the head is approximately 5.1 ft (1.6 m), and as the flow rate increases, the head decreases. For example, at approximately 3 GPM (0.7 m³/h), the head is around 4 ft (1.2 m), and at the maximum flow rate of about 5.5 GPM (1.2 m³/h), the head is close to 0 ft (0 m).
COMFORT PM Range
UP 10-16 PM Technical Data
- Flow, Qmax: 2.2 GPM (0.5 m³/h)
- Head, Hmax: 3.9 ft (1.2 m)
- Motor: Single Phase, 115V/208-230V
- Min. Fluid Temperature: 36°F (2°C)
- Max. Fluid Temperature: 203°F (95°C)
- Max. Working Pressure: 145 PSI
Standard Features:
6ft. line-cord w/plug
Electrical Data:
- Volts: 1X115V
- Watts: 5-8.5W
- Amps: 0.23A
Performance Curve:
The performance curve for the UP 10-16 PM shows head (H) in feet and meters on the vertical axis, and flow rate (Q) in US Gallons Per Minute (GPM) and cubic meters per hour (m³/h) on the horizontal axis. The curve indicates that at a flow rate of 0 GPM, the head is approximately 3.9 ft (1.2 m). As the flow rate increases, the head decreases. For instance, at about 1 GPM (0.2 m³/h), the head is around 3 ft (0.9 m), and at the maximum flow rate of approximately 2.4 GPM (0.5 m³/h), the head is near 0 ft (0 m).
Model Comparison Table
| Models | Part Number | 1/2" Sweat | 1/2" F FNPT | 1 1/4" Union | Line Cord | Check Valve | Isolation Valve | AUTO |
|---|---|---|---|---|---|---|---|---|
| UP10-16 PM B5/LC | 98420206 | ✔️ | ✔️ | |||||
| UP10-16 PM BN5/LC | 98420210 | ✔️ | ✔️ | ✔️ | ✔️ | |||
| UP10-16 A PM B5/LC | 98420222 | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ||
| UP10-16 A PM BN5/LC | 98420223 | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
| UP10-16 A PM BU/LC | 98420224 | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
Contact Information
GRUNDFOS Kansas City
17100 West 118th Terrace
Olathe, Kansas 66061
Phone: (913) 227-3400
Fax: (913) 227-3500
www.grundfos.us
GRUNDFOS Canada
2941 Brighton Road
Oakville, Ontario L6H 6C9
Phone: (905) 829-9533
Fax: (905) 829-9512
GRUNDFOS Mexico
Boulevard TLC No. 15
Parque Industrial Stiva Aeropuerto
C.P. 66600 Apodaca, N.L. Mexico
Phone: 011-52-81-8144 4000
Fax: 011-52-81-8144 4010
