USB A-LINK

Product Description

The USB A-Link is a specialized Arrowhead Alarm Products USB to Serial connection cable. It allows AAP software to communicate with AAP hardware.

Image description: A coiled black USB A-Link cable with a USB-A connector on one end and a smaller, proprietary connector on the other, likely for connecting to Arrowhead Alarm Products hardware.

Compatible Hardware

• ESL/Elite-S/Elite-S Lite/Runner
• Elite 16D v6/PW-16
• Elite 8D/Alert 8D/PW8/Elite-Lite
• Elite 64/PW64
• AC2W
• IP-Module/ESL-2 APP POD

Compatible Operating Systems

Windows 2000, XP, 7, 8, 10 & 11 (drivers may be required)

Setup and Installation

1. Go to www.aap.co.nz/alink and download the USB A-Link Driver.
2. Choose the Driver to match your operating system/CPU type and run the .exe file.
3. When installation is complete, plug the USB D-Link into one of your PC's USB ports.
4. Install the software for the product you wish to connect to. Download the software from www.aap.co.nz/alink.
5. Once software is installed, go to (setup/communication/source) and choose the (Direct via COM?) that has been assigned.

For Updating IP-MODULE & ESL-2 APP POD

For instructions and software updates for IP-MODULE & ESL-2 APP POD, please visit: www.aap.co.nz/updater

Company Information

ARROWHEAD ALARM PRODUCTS Ltd.
1A Emirali Road,
Silverdale 0932,
Auckland, NZ
Ph. 09 414 0085
www.aap.co.nz
v1.0