1 Wire and Install Thermostat
Properly wire and configure the thermostat. Refer to the Installer Guide.
Refer to the User Manual for programming and maintenance.
NOTE: Requires common (C) wire on Heat Pump, Heat Only or Cool Only Systems.
Helpful videos can be found at www.braeburnonline.com and in the BlueLink Smart Connect® App.
Diagrams show covers of the Braeburn BlueLink Installer Guide and User Manual for the Universal Smart Wi-Fi Thermostat Model 8205.
2 Set-Up for Connection
Before beginning setup you will need to:
- Know your Wi-Fi network name and password
- Have a valid e-mail address
- Locate your thermostat serial number
- Get the FREE app for iOS or Android™
NOTE: The initial thermostat connection must be performed from an Apple iOS or Android™ mobile device or tablet. Once connected, you can access the app on a desktop PC by visiting bluelinksmartconnect.com/bluelink.
Visuals show "Download on the App Store" and "GET IT ON Google Play" buttons, indicating mobile app availability. Another visual depicts the thermostat display showing "Set Point 70°", "Auto Heat On", and "Following Program Day Schedule".
3 Login and Register
- Open the BlueLink Smart Connect App. Select REGISTER and enter a valid e-mail address.
- Enter the thermostat serial number. You can locate this number on the back of the thermostat.
NOTE: If you removed the thermostat to locate the serial number, make sure to reconnect it before selecting ENTER.
- Complete the remaining registration screens. The application will walk you through the Wi-Fi connection process.
Diagram shows the back of the Braeburn 8205 thermostat with a label indicating "Serial number location" and a QR code, along with the serial number format "BL04XXXXXXXX-XX".
4 Use the Wi-Fi Menu
Use the Wi-Fi Menu to connect your thermostat to Wi-Fi, review connection information, and to clear Wi-Fi connection when necessary.
To Enter the Wi-Fi Menu
- Press and release the MENU button.
- Use the ▲ or ▼ buttons to select WIFI SET.
- Press NEXT (HOLD) to confirm this choice and enter the Wi-Fi Menu.
- Press NEXT (HOLD) or BACK (PROG) to move to the next or previous setting.
- Press RETURN (FAN) to exit or wait 30 seconds.
Thermostat display showing "WIFI SET" with "NEXT" and "RETURN" options.
| No. | Option | Displayed | Default | Available | Description |
|---|---|---|---|---|---|
| 1 | Wi-Fi Pairing Mode | CONNECT WIFI | - | - | - |
[Only appears if the thermostat does not have saved Wi-Fi network information] The thermostat is ready to connect to a Wi-Fi network. Use the BlueLink Smart Connect application to complete the connection process. | |||||
| 2 | Wi-Fi SSID | (SSID) WIFI | - | - | - |
[Only appears if the thermostat has saved Wi-Fi network information] This option does not perform any function, but allows the user to review the saved Wi-Fi network. | |||||
| 3 | Wi-Fi Clear | CLEAR | NO | NO | Select if you do not want to clear the saved Wi-Fi network information. |
| YES | Select to clear the saved Wi-Fi network information and prepare the thermostat for a new Wi-Fi connection. | ||||
[Only appears if the thermostat has saved Wi-Fi network information] This option can be used to clear the saved Wi-Fi network to prepare the thermostat for a new network. | |||||
| 4 | No Power Warning | NO POWER WIFI | - | - | - |
[This message appears if the thermostat does not have sufficient power to operate the Wi-Fi] Ensure that the thermostat is snapped securely onto the sub-base, and try again. If this message persists, check power to the heating and cooling equipment. If your thermostat is not equipped with a common "C" wire, you may need to provide this connection in order to remove this message. | |||||
Troubleshooting Wi-Fi Connection Issues
The following error messages may be encountered when connecting to Wi-Fi.
NO POWER Indicates the thermostat does not have sufficient power to operate Wi-Fi. Make sure the thermostat is snapped securely on the sub-base. Check the power to the heating and cooling equipment, and try again. If the issue persists and your thermostat is not equipped with a common "C" wire, you may need to provide this connection to remove the message and connect to Wi-Fi.
Thermostat display showing "NO POWER" message.
CONNECT FAIL Indicates the thermostat was unsuccessful in its attempt to connect to the Wi-Fi network. This could be due to a variety of factors, but check the following and try again:
- Ensure you are entering the correct network name and password during the connection process. If using a network with no password, enter a space in the password field.
- Make sure you are connecting to a 2.4GHz Wi-Fi network. The thermostat is not compatible with 5GHz networks.
- Try disabling MAC address filtering, firewalls, and any additional advanced security on your router during the connection process. Once you have finished the connection, you can typically re-enable these advanced security settings.
- Confirm that you have internet access on other devices connected to the Wi-Fi network you are trying to use.
Thermostat display showing "CONNECT FAIL" message.
Clearing Wi-Fi Connection or Changing Network
To clear the thermostat's Wi-Fi connection and prepare for a new Wi-Fi connection, perform the following steps:
- Use option 3 of the Wi-Fi setup menu to clear the currently saved network.
- Reboot the thermostat by removing it from the wall, removing the batteries and letting the thermostat sit until it powers down completely.
- Restore power to the thermostat and snap it onto the sub-base. The thermostat can now be connected to a new Wi-Fi network, if desired.
Braeburn Systems Home - Braeburn
