ZT230 Quick Start Guide

[Step 1] Install the Printer Driver

IMPORTANT: Go to zebra.com/zt230-info and install the driver for your printer. The driver MUST be installed before connecting the printer to the computer, or it will cause complications. If your Microsoft Windows-based computer does not have the driver installed for this printer, download it from zebra.com/zt230-info and install it before continuing.

[Visual Description: A QR code is displayed next to the URL. The text emphasizes the importance of driver installation before physical connection.]

[Step 2] Remove the Printer from the Box

Carefully remove the printer from its packaging. The printer weighs approximately 9.1 kg (20 lbs). Place it on a stable, flat surface.

[Visual Description: An illustration shows a printer being lifted out of a box and placed onto a table. The weight is indicated as 9.1 kg (20 lbs).]

[Step 3] Connect the USB Cable

a - Remove the port blocker label.

b - Connect the USB cable to the printer and your computer.

[Visual Description: A diagram shows the rear of the printer with a USB port labeled 'b'. A laptop is shown with a USB port. An arrow indicates connecting a USB cable from the laptop to the printer. A small label 'a' points to a port blocker that should be removed.]

[Step 4] Plug the Printer into an Electrical Outlet

Connect the printer's power cord to an electrical outlet. The printer is compatible with 100-240 VAC, 50-60 Hz power sources.

[Visual Description: An illustration shows a power cord being plugged into a wall outlet. The power specifications (100-240 VAC, 50-60 Hz) are displayed.]

[Step 5] Turn on the Printer Power

Press the power button to turn on the printer.

[Visual Description: An illustration highlights the power button on the printer.]

[Step 6] Open the Media Cover

Lift and open the printer's media cover.

[Visual Description: An illustration shows the printer with its top cover lifted open.]

[Step 7] Release the Printhead Assembly

Rotate the printhead latch (a) to release the printhead assembly (b).

[Visual Description: A close-up view of the printhead area. A latch labeled 'a' is shown being rotated, which releases the printhead assembly labeled 'b'.]

[Step 8] Recycle Damaged Labels

Remove and discard any dirty or torn labels from the waste collection area.

[Visual Description: An illustration shows a roll of used labels and a waste bin, indicating the disposal of damaged labels.]

[Step 9] Load Media

a - Fold down the media guide.

b - Hang the roll of media on the media hanger.

Feed the media as shown:

• a - Under the gray media dancer.
• b - Inside the gap sensor.
• c - Under the inner media guide.

Adjust the outer media guide until it almost touches the edge of the media.

[Visual Description: A multi-part diagram illustrates loading a media roll. It shows folding down a guide (a), hanging the roll on a hanger (b), and then threading the media under various guides and sensors (a, b, c). The final adjustment of the outer media guide is also depicted. A link to a video tutorial is provided.]

Watch the video: zebra.com/zt230-info

[Step 10] Load Ribbon

Place the ribbon on the ribbon supply spindle as shown. Push the roll back as far as it will go.

Feed the ribbon as shown.

Place an empty core on the ribbon take-up spindle as shown. Push the core back as far as it will go.

Wrap the ribbon around the core several times, and then rotate the spindle to tighten and align the ribbon.

[Visual Description: Diagrams show the process of loading a ribbon. This includes placing the ribbon roll on the supply spindle, feeding it, placing an empty core on the take-up spindle, and wrapping the ribbon around the core to tighten it.]

[Step 11] Prepare for Printing

Rotate the printhead lever down to close the printhead.

Press PAUSE. The printer will auto-calibrate and feed several labels. The ribbon will tighten and align on the printhead.

Close the media cover.

[Visual Description: Illustrations show the printhead lever being closed, the PAUSE button being pressed, and the media cover being closed. The auto-calibration process is indicated.]

Support and Information

• View user documentation and how-to videos: zebra.com/zt230-info
• View Quick Answers and Knowledge Base: zebra.com/knowledge
• Join Community Connection of Zebra users and ambassadors: zebra.com/supportcommunity
• Need to design a label? Visit zebra.com/zebradesigner
• Learn about genuine Zebra supplies: zebra.com/supplies
• Contact Zebra about your printer: zebra.com/contactsupport
• Need to manage your printer? Visit zebra.com/profilemanager
• Need to secure your printer? Visit zebra.com/printsecure

[Visual Description: This section lists various support resources and links, including website addresses for documentation, knowledge bases, community forums, design software, supplies, contact information, printer management, and security.]