GREÅKER Cabinet

Safety Warnings

WARNING

⚠ Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install anti-tip device provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Read and follow each step of the instruction carefully.

Assembly Steps

Step 1: Prepare Panels and Attach Hardware

[Diagram shows various screws, dowels, cam locks, hinges, and handles being laid out.]

[Diagram shows the assembly of drawer slides onto side panels and attachment of hinges and handles to doors.]

Step 2: Attach Drawer Runners

[Diagram shows attaching drawer runners to side panels using dowels and screws.]

Step 3: Insert Dowels into Base Panel

[Diagram shows inserting wooden dowels into a panel.]

Step 4: Attach Side Panel

[Diagram shows attaching a side panel to the base panel, using dowels and cam locks.]

[Diagram shows a hand pushing a panel into place and a warning symbol indicating not to force.]

Step 5: Attach Second Side Panel

[Diagram shows attaching the second side panel to the base panel, using dowels and cam locks.]

Step 6: Attach Back Support Panel

[Diagram shows sliding a back support panel into grooves on the side panels.]

[Arrow indicates direction of insertion.]

Step 7: Secure Back Support Panel

[Diagram shows securing the back support panel using cam lock housings.]

Step 8: Attach Top Panel

[Diagram shows attaching the top panel to the side panels, using dowels and screws.]

Step 9: Insert Dowels into Side Panels

[Diagram shows inserting wooden dowels into the side panels.]

Step 10: Attach Front Panel

[Diagram shows attaching a front panel to the side panels, using dowels and cam locks.]

[Arrow indicates direction of insertion.]

Step 11: Secure Front Panel

[Diagram shows securing the front panel using cam lock housings.]

Step 12: Attach Feet

[Diagram shows attaching the feet to the base of the cabinet.]

Step 13: Attach Drawer Slide Mounts

[Diagram shows attaching small mounting blocks to the inside of the cabinet side panels.]

Step 14: Insert Shelf

[Diagram shows inserting a shelf into the cabinet.]

[Arrow indicates direction of insertion.]

Step 15: Attach Shelf Support Brackets

[Diagram shows attaching shelf support brackets to the cabinet interior.]

Step 16: Attach Drawer Runner Bases

[Diagram shows attaching drawer runner bases to the cabinet interior.]

Step 17: Attach Drawer Slide Housing

[Diagram shows attaching drawer slide housings to the cabinet interior.]

Step 18: Attach Top Back Panel

[Diagram shows attaching a top back panel to the cabinet.]

Step 19: Place Top Panel

[Diagram shows placing the top panel onto the cabinet structure.]

[Arrow indicates direction of placement.]

Step 20: Secure Top Panel

[Diagram shows securing the top panel using cam lock housings.]

Step 21: Wall Mounting Instructions

[Diagram shows wall mounting options A, B, C.]

The screw(s) and plug(s) supplied can be used with most solid (A) and hollow (B) walls. For solid wood (C) use the screw(s) without plug(s). If you are uncertain, seek professional advice.

Option A: Solid Wall

Use drill bit Ø 8 mm (5/16"). Insert screw and plug. Ensure depth of approximately 70 mm (2 3/4").

Option B: Hollow Wall

Use drill bit Ø 8 mm (5/16"). Insert screw and plug. Ensure depth of approximately 30 mm (≈1 1/4").

Option C: Solid Wood

Use drill bit Ø 3 mm (1/8"). Use screw without plug. Ensure depth of approximately 30 mm (≈1 1/4").

[Diagram shows drilling and inserting wall anchors/screws for each option.]

Step 22: Attach Anti-Tip Bracket

[Diagram shows attaching the anti-tip bracket to the top back edge of the cabinet.]

Step 23: Attach Wall Bracket

[Diagram shows attaching the corresponding bracket to the wall.]

[This step is part of the wall mounting process, shown in detail on page 21.]

Step 24: Final Placement

[Diagram shows the cabinet being moved into its final position.]

[Arrow indicates direction.]

Step 25: Attach Drawer Slide Runners

[Diagram shows attaching the final drawer slide runners to the cabinet interior.]

Step 26: Assemble Drawer Fronts

[Diagram shows assembling drawer front panels using hinges and screws.]

Step 27: Attach Drawer Sides

[Diagram shows attaching drawer sides to the drawer front panels.]

Step 28: Attach Doors

[Diagram shows attaching the assembled doors to the cabinet hinges.]

Step 29: Attach Handles

[Diagram shows attaching the handles to the cabinet doors.]

Step 30: Assemble Drawer Boxes

[Diagram shows assembling drawer boxes using dowels and screws.]

Step 31: Insert Drawer Sides

[Diagram shows inserting drawer sides into the drawer box.]

Step 32: Attach Drawer Back Panel

[Diagram shows attaching the drawer back panel to the drawer box.]

[Diagram shows hands pushing panels together and a warning symbol for correct alignment.]

Step 33: Secure Drawer Back Panel

[Diagram shows securing the drawer back panel using cam lock housings.]

Step 34: Insert Drawer Base

[Diagram shows sliding the drawer base into the grooves of the drawer box.]

[Arrow indicates direction of insertion.]

Step 35: Attach Drawer Support

[Diagram shows attaching a metal support bar to the drawer.]

[Diagram shows correct and incorrect ways to attach the support.]

Step 36: Attach Drawer Front to Drawer Box

[Diagram shows attaching the assembled drawer front to the drawer box.]

[Diagram shows hands aligning panels and a close-up of connection points.]

Step 37: Attach Drawer Slides to Drawer

[Diagram shows attaching drawer slides to the sides of the assembled drawer box.]

Step 38: Secure Drawer Slides

[Diagram shows securing the drawer slides with cam lock housings.]

Step 39: Attach Drawer Runners to Cabinet

[Diagram shows attaching drawer runners to the cabinet interior.]

Step 40: Insert Drawers

[Diagram shows inserting the assembled drawers into the cabinet.]

[Arrow indicates direction of insertion.]

Step 41: Final Check and Accessories

[Diagram shows the completed cabinet with doors and drawers.]

Ensure all parts are securely fastened and the unit is stable.